• 한국음향학회지
• /
• 제23권3호
• /
• pp.197-205
• /
• 2004

천해에서 측정한 선박 방사소음의 거리-주파수 영역 스펙트로그램에 나타나는 줄무늬 패턴 기울기의 부호 변화 원인에 대한 분석 결과를 수록하였다. 모드 이론에 근거한 수치 모델을 이용하여 해저면 음향 특성을 변화시켜 가며 모의한 줄무늬 패턴과 분산 특성을 분석한 결과는 측정 신호에 나타나는 줄무늬 패턴 기울기의 부호 변화가 해저면의 전단성, 보다 구체적으로는 두께가 약 3±1m 정도일 것으로 예상되는 퇴적층의 하부에 존재하는 기반암의 전단성에서 기인한 특징임을 보여주었다.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2055-2060
• /
• 2003

Striation is a typical pattern observed on the fatigue fracture surface and the spacing is known to correspond to a macroscopic fatigue crack growth rate, and many models for the predict in the formation of such striation have been proposed. However, these theories and methods can't be applied under random loading spectrum. In this study, the fatigue tests were carried out on aluminum alloy under random loading spectrum. The fatigue fracture surfaces were observed in the scanning electron microscope (SEM) and great quantities of SEM micrographs were synthesized and saved in computer system. The space and morphology of several large-scale striations, which are expected to from at the relatively greater load range in loading block, were observed. The crack length for each loading blocks was decided in consideration of regularity and repetition of those striations. It is shown that the applicability of fractographic methods on the fatigue fracture surface under random loading spectrum.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.43-50
• /
• 2007

A range-frequency interference pattern is analyzed in the course of the propagation of ship noise in shallow water. It has been shown to exhibit striated bands of intensity maxima and minima in the spectrogram. The slope of the striations is an invariant of the modal interference and is described by a waveguide invariant parameter $\beta$. It turns out that this interference pattern is useful for identifying the physical properties of the waveguide such as seabed properties. In this article, the interference pattern is analyzed using image processing techniques to produce the distribution of the beta and the effects of sediment types and geoacoustic parameters on beta distribution are examined and characterized by moments of the distributions.

• Animal Systematics, Evolution and Diversity
• /
• nspc9호
• /
• pp.10-17
• /
• 2016

Carchesium polypinum and Vorticella campanula were collected in freshwater ponds and reservoirs on Jindo Island and other places in Korea. These two vorticellids are newly recorded in Korea. The two species are described using live and silver impregnated cell observations, morphometry, line drawings, and microphotographs. Characterizations were based on the following diagnostic features: Carchesium polypinum was observed mainly as a funnel to fanshaped colony, basically dichotomous branching pattern, discontinuous spasmoneme, subconical shaped zooid, J shaped macronucleus, ventrally positioned single contractile vacuole, and pellicular striation with 61-80 rows between the peristomial lip and aboral ciliary wreath, and 18-30 rows between the aboral ciliary wreath and scopula. Vorticella campanula was conspicuously characterized by the broadly bulged peristomial lip, wide conical shaped zooid, J or S shaped macronucleus, ventrally positioned single contractile vacuole and pellicular striation with 64-75 rows between the peristomial lip and aboral ciliary wreath, and 27-41 rows between the aboral ciliary wreath and scopula. We provide redescriptions of two well-known vorticellids with detailed drawings and descriptions of oral ciliatures from Jindo Island and other places on the Korean peninsula.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.62-69
• /
• 2014

In this paper, in order to investigate the effects of marco and microscopic observations of fatigue crack growth in friction stir welded (FSWed) 7075-T651 aluminum alloy plates, fatigue crack growth tests were performed under constant amplitude loading condition at room temperature with three different pre-cack locations, namely base metal (BM-CL) and two kinds of pre-crack locations in welded joints, weld metal (WM-CL) and heat affected zone (HAZ-CL) specimens. The fatigue crack growth behavior of FSWed 7075-T651 aluminum alloy plates were discussed based on the marco and microscopic fractographic observations. The marcoscopic aspects of surface crack growth path for BM-CL and HAZ-CL specimens indicate relatively straight lines, however, the crack growth paths of WM-CL specimens grow first straight and by followed toward the TMAZ and HAZ. The microscopic aspects of fatigue fracture for BM-CL and HAZ-CL specimens indicate typical fatigue striation, but WM-CL showed intergranular fracture pattern by micro structural changes of FSW process.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.50-53
• /
• 2023

In this study, the photolithography process was chosen to reduce the aspect ratio of the cross-section of a high-temperature superconducting (HTS) tape by dividing the superconducting layer of the tape. Reducing the aspect ratio decreases the magnetization losses in the second-generation HTS tapes generated by AC magnetic fields. The HTS tape used in the experiment has a thin silver (Ag) layer of about 2 ㎛ on top of the REBCO superconducting layer and no additional stabilizer layer. A dry film resist (DFR) was laminated on top of the HTS tape by a lamination method for the segmentation. Exposure to a 395 nm UV lamp on a patterned mask cures the DFR. Dipping with a 1% Na₂CO₃ solution was followed to develop the uncured film side and to obtain the required pattern. The silver and superconducting layers of the REBCO films were cleaned with an acid solution after the etching. Finally, the segmented HTS tape was completed by stripping the DFR film with acetone.

• 한국음향학회지
• /
• 제26권4호
• /
• pp.173-181
• /
• 2007

본 논문에서는 음향 스펙트로그램을 이용하여 수중 이동표적의 위치를 추정하기 위한 방법을 연구하였다. 주파수와 시간의 2차원 평면으로 표현되는 스펙트로그램은 수중 운동체의 이동 정보를 제공한다. 음원과 수신 센서간의 거리가 충분히 멀 경우 스펙트로그램의 넓은 주파수에 걸쳐 발생하는 줄무늬들은 해수면 및 해저면에 의해 반사된 모드간의 간섭을 의미하고, 이때 최대 음압이 발생하는 줄무늬의 기울기는 음향 도파관 불변인자 ${\beta}$와 표적과 센서간의 거리에 의해 영향을 받는다. 2개 이상의 센서를 사용하여 이동하는 선박의 광대역 방사 소음을 측정한 경우 스펙트로그램에 나타나는 최대 음압이 발생하는 줄무늬의 기울기와 줄무늬가 주파수축에서 천이된 비율이 표적과 센서간의 거리에 따라 각각 다르게 나타난다. 두개의 센서를 두 정점으로 가정하여 표적에 이르는 거리의 비가 일정한 값을 가지면서 운동하는 점의 자취인 아폴로니오스의 원을 형성하고, 3개의 센서를 사용할 경우 두 개의 원이 서로 교점을 형성하는데, 이 교점의 좌표를 표적의 위치라 추정한다. 제안된 위치 추정 기법의 성능을 평가하기 위해 음파전달 프로그램을 이용한 시뮬레이션을 수행하였다.

• 한국음향학회지
• /
• 제39권4호
• /
• pp.279-285
• /
• 2020

항행 선박의 시·공간적 모니터링 기술 연구는 연안 해양공간에서 해양 생태계 보호 및 효율적인 관리를 위해서 중요하다. 본 연구에서는 실험해역에서 측정된 선박 소음 특징인 광대역 줄무늬 패턴 자료에 인공지능 기술을 적용하여 항행하는 선박을 자동 탐지하는 연구를 수행하였다. 소음 스펙트럼 이미지와 선박의 항행정보를 수집하기 위한 해상시험은 2016년 7월 15일부터 26일까지 제주 남부 해역에서 실시되었고, 컨볼루션 신경망 모델은 수집된 이미지를 기반으로 학습, 교차검증 과정을 거쳐 최적화되었다. 선박 소음 자동 탐지 기법의 성능은 정밀도(0.936), 재현율(0.830), 평균 정밀도(0.824) 그리고 정확도(0.949)로 평가되었다. 결론적으로 인공지능 기법을 활용하여 선박 소음의 자동 탐지 가능성을 확인하였다. 본 연구의 결과로부터 성능을 향상시킬 수 있는 방안 및 향후 연구에 대하여 제안하였다.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.43-50
• /
• 2002

Friction welding has many merits such as energy efficiency, simple processing, etc butt difficult to obtain good weld at the welded interface and heat affected zone. To date, the continuum mechanics and fracture mechanics are utilized to analyse stresses at the interface and propagation of cracks. In this study. STS304 and SM15C are selected because they can be differentiated distinctively from metallic point of view and crack can be observed easily. It is ovserved during friction welding that STS304, rotary part is hatter than SH15C, fixed part. The last fracture occurs around the center because the surface of fatigue fracture has smooth regions, due to the separation phenomenon in plastic flows layers and striation dimple pattern.