• Nuclear Engineering and Technology
• /
• 제11권1호
• /
• pp.1-20
• /
• 1979

수화물 결정에 있어서 $H_2O$ 분자의 외부 각 운동을 조사하고저 NaBr-2$H_2O$ 및 BaCl$_2$-2$H_2O$ 분말시료에 대한 중성자비탄성산란실험을 수행하였으며, 관측된 진동수를 모두 이 외부 각 운동에 의한 것으로 보고 다중 및 다준위산란효과를 제거하므로서 평균진동수 분포함수를 구하였다. FG 행열법에 의해서 계산된 진동수의 이론 값들은 모두 복합 mode에 의한 것이였으며 따라서 그 중 포텔샬.에너지분포가 큰 mode로서 관측치에 대한 assignment를 하였다. 소수결합력은 Lippincott-Schroeder 포텐샬함수에서 추산하였으며, 절선형 및 분기형수소결합에 대한 이 함수의 유용성을 $H_2O$ 외부 각 운동 포텐샬함수 모양에 의거하여 검토하였다. 수소결합력의 성질에 대하여 더욱 자세한 자료를 얻기 위해서는 진동수 계산에 H…Y 신축상호작용 운만 아니라 O-H…Y 변각상호작용의 도입이 필요함을 논의하였고 또 $H_2O$ 외부 각 운동에 인어서 mode의 순수성 및 대칭성을 군론을 작용한 방법에 의거하여 논의하였다.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.97-105
• /
• 2005

[ $11\AA$ ] tobermorite$(5CaO{\cdot}6SiO_2{\cdot}5H_2O)$ is synthesized from the mixtures of calcium hydroride and quartz using alumina in a molar ratio $Ca(OH)_2/SiO_2$ of 0.8 at $180^{\circ}C$ for 8 and 24 hrs under saturated steam pressure. The influence of alumina on the formation of $11\AA$ tobermorite was investigated by X-ray diffraction, differential thermal analysis and infrared spectroscopy. $11\AA$ tobermorite containing increasingly larger amounts of aluminum showed a shift of the basal spacing from 11.3 to $11.6\AA$. In general, there was a direct linear relation between the basal spacing and added content of alumina. The differential thermal analysis curves showed that $11\AA$ tobermorite with increasing alumina contents exhibited the exothermic peak at high temperature, namely $11\AA$ tobermorite containing aluminum gave a sharp exothermic peak at temperature around $850\~860^{\circ}C$ in the case of $S_3\~S_5$. The absorption band at $1607\~1620cm^{-1}$ is attributed to the bending vibration of water, and the position of the main O-H stretching and Si-O lattice vibration of $11\AA$ tobermorite at 3500 and $965cm^{-1}$ respectively is not altered. Consequently the existence of alumina accelerates the crystallization of $11\AA$ tobermorite, and that the aluminum ion appears to substitute for the silicon ion in $11\AA$ tobermorite structure. Al-containing tobermorite is distinguished from Al-free tobermorite.

• 한국콘텐츠학회논문지
• /
• 제8권4호
• /
• pp.273-284
• /
• 2008

동작은 유아의 신체적, 사회적, 인지적 발달에 매우 중요한 요소이다. 본 논문에서는 유아의 신체에 적절한 동작 추정 방법을 제안한다. 본 논문에서는 동작교육에 필요한 동작 중에서 걷기, 뛰기, 앙감질의 이동동작과 구부리기, 뻗기, 균형잡기, 회전하기의 비이동 동작을 대상으로 한다. 제안된 시스템은 두 대의 카메라에서 획득된 프레임에서 조명 보정, 배경 제거, 모폴로지 실행 등의 과정을 통해 실루엣을 추출한다. 실루엣 특징으로 면적, 가로세로 비율, 발의 위치, 7개의 Hu moments를 사용한다. 또한 지역 특징으로 실루엣을 $5{\times}3$으로 나누어 각 영역의 면적과 움직임을 사용한다. 동작 추정을 위해서, 추출된 특징에 확률 전파를 적용하였다. 본 논문에서 제안된 알고리즘은 마커없이 유아들의 기본 동작을 추정함으로써 동작교육을 위한 가상 학습공간에서 실감형 인터페이스로 사용될 수 있는 가능성을 보여주고 있다.

• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.881-894
• /
• 2015

The silver generation have clothing style of optimal daily life comparing than young generation because they do not participate a specific sport event but daily- life exercise. As the human body ages, the figure of the silver generation shows different body shape because upper body changes to curved figure including the belly and waist part. Therefore, clothing characteristics for the silver generation should be considered with proper function, design and textiles to optimize body movement. This study investigated various exercise types according to motion analysis of the silver generation in order to develop the design of the active T-shirts reflecting the structural properties and providing the optimum exercise circumstance. The results to consider design needs are as followed; As the T-shirts design for the flexible exercise which required frequent movement of upper body such as bending and waist twisting during body stretching, a stretch fabric applied to the waist part considering T-shirts allowance and length to make extreme elongation and support for well-fitting appearance of the T-shirts. As the T-shirts design for the instantaneous reactionary exercise, high elastic four-way stretch fabric is applied to the part of arm hole to optimize skeletal and muscle movement for entire body and arm work. As the T-shirts design for the endurance exercise such as climbing, cycling, and walking, the shoulder line of the back part has cutting line allowance to make optimum movement of the upper body but no change of the waist part.

• 인터넷정보학회논문지
• /
• 제8권3호
• /
• pp.119-129
• /
• 2007

본 논문에서는 두 대의 카메라를 직각으로 배치하여 얻은 동영상에서 인체의 실루엣을 이용하여 동작을 인식하는 방법을 제안한다. 제안된 시스템은 실루엣에서 전역 특징과 지역 특징을 추출하며, 이 특징들은 정적인 프레임에만 있느냐에 따라 정적 특징과 동적 특징으로 다시 나뉜다. 추출된 특징들은 RBF 신경망을 훈련시키기 위해 사용된다. 제안된 신경망은 정적 특징을 입력층으로 보내고, 동적 특징은 인식을 위한 추가적인 특징으로 이용한다. 본 논문에서 제안된 신경망 동작 인식 시스템은 유아들의 동작 교육에 적용되었다. 동작 교육을 위해 제시되는 기본 동작은 걷기, 뛰기, 앙감질 등의 이동 동작과 구부리기, 뻗기, 균형 잡기, 회전하기 등 비 이동 동작으로 구분된다. 제안된 시스템은 동작교육을 위해 7가지 기본 동작을 학습시킨 신경망으로 성공적으로 동작 인식을 하였다. 제안된 시스템은 유아의 공간감각 계발을 위한 동작교육 시스템에 활용될 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.357-363
• /
• 2005

Active contour models have been extensively used to segment, match, and track objects of interest in computer vision and image processing applications, particularly to locate object boundaries. With conventional methods an object boundary can be extracted by controlling the internal energy and external energy based on energy minimization. However, this still leaves a number of problems, such as initialization and poor convergence in concave regions. In particular, a contour is unable to enter a concave region based on the stretching and bending characteristic of the internal energy. Therefore, this study proposes a method that controls the internal energy by moving the local perpendicular bisector point of each control point on the contour, and determines the object boundary by minimizing the energy relative to the external energy. Convergence at a concave region can then be effectively implemented as regards the feature of interest using the internal energy, plus several objects can be detected using a multi-detection method based on the initial contour. The proposed method is compared with other conventional methods through objective validation and subjective consideration. As a result, it is anticipated that the proposed method can be efficiently applied to the detection of the pulmonary parenchyma region in medical images.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.55-60
• /
• 2002

For the development of a new creep test technique, the availability of SP-Creep test is discussed for 1Cr-0.5Mo boiler header material. And some results are also compared with those of 2.25Cr- 1Mo steel which widely uses as boiler superheater tube. The results can be summarized as follows. The load exponents(n) obtained by SP-Creep test for 1Cr-0.5Mo steel are decreased with increasing creep temperature and the values are 15.67, 13.89, and 17.13 at 550$^{circ}C$ ,575$^{circ}C$ and 600$^{circ}C$, respectively. The temperature dependence of the load exponent is given by n = 107.19 - 0.1108T. This reason that load exponents show the extensive range of 10∼16 is attributed to the fine carbide such as M$_{23}$C$_{6}$ in lath tempered martensitic structures. At the same creep condition, the secondary creep rate of 1Cr-0.5Mo steel is lower than the 2.25Cr-1Mo steel1 due to the strengthening microstructure composed by normalizing and tempering treatments. Through a SEM observation, it can be summarized that the primary, secondary, and tertiary creep regions of SP-Creep specimen are corresponding to plastic bending, plastic membrane stretching, and plastic instability regions among the deformation behavior of four steps in SP test, respectively.y.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.633-641
• /
• 2010

The purpose of this study is to evaluate a new flight suit in bilateral ways; subjectively and objectively in the improvements of comfort and mobility. Seven healthy males at the age of twenties volunteered in this wearing test. They were over 177 cm in height and 92-95 cm in chest circumference, which satisfies the M95 Special' size described in the Korean Military Specifications and Standards. The subjective satisfaction was evaluated according to the criteria of ease of donning and doffing, fitness of wear, mobility, space between cloth and body, convenience in using restroom. Subjective satisfaction evaluation says that the best improvement of movement are neck circumference, chest breadth, armscye circumference, waist back length, crotch length, crotch height and body rise. According to the evaluation, improvements of mobility were conspicuous especially in parts of body like neck, breast, waist, back, and arms. When evaluating objective satisfaction, we measured a angle difference in a prescribed standard-grid on a photograph that picked up while the subject performed each motion in front of 10 cm-interval grid. As a result, the motion that had angle difference above 5 degrees were arm stretching and standing on single leg holding at forward or at his side. Bending necks and waist, crouching also had angle difference of over 5 degrees. The improvements are discussed from the viewpoint that the increased ease in parts of armscye circumference and crotch in new flight suit pattern.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1983-1990
• /
• 2019

Spray deposited Molybdenum trioxide (MoO₃) thin film of thickness nearly 379 nm were irradiated with 200 MeV Ag¹⁵⁺ ion beam at different fluences (Ø) of 5 ×10¹¹, 1 × 10¹², 5 × 10¹² and 1 × 10¹³ ions/㎠. The X-ray diffraction (XRD) pattern of the pristine film confirms orthorhombic structure and the crystallinity decreased after irradiation with the fluence of 5 × 10¹¹ ions/㎠ due to irradiation induced defects and became amorphous at higher fluence. In pristine film, Raman modes at 665, 820, 996 cm^-1 belong to Mo-O stretching, 286 cm^-1 belong to Mo-O bending mode and those below 200 cm^-1 are associated with lattice modes. Raman peak intensities decreased upon irradiation and vanished completely for the ion fluence of 5 ×10¹² ions/㎠. The percentage of optical transmittance of pristine film was nearly 40%, while for irradiated films it decreased significantly. Red shift was observed for both the direct and indirect band gaps. The pristine film surface had densely packed rod like structures with relatively less porosity. Surface roughness decreased significantly after irradiation. The electrical transport properties were also studied for both the pristine and irradiated films by Hall effect. The results are discussed.

• 지역사회간호학회지
• /
• 제7권1호
• /
• pp.100-117
• /
• 1996

The purpose of the survey was to find out the prevalence rate and related factors for low back pain of nurses and to develop educational program for prevention of the low back pain. The subjects of the survey were 593 nurses of general hospitals in Tae-gu City. The survey was conducted from June 10, 1994 to October 3, 1994. The questionnaire included 34 question items concerning general characteristics, factors related to low back pain, physical nursing activities, and characteristics of low back pain. The results were as follows : 1. Among 593 of subjects, the prevalence rate of low back pain showed 62.1%. 2. In relation of health related life activities and low back pain prevalence, self-reported health state was highly significant(P=.000). 3. In relation of work environmental factors and low back pain prevalence, job satisfaction (P=.026), job stress(P=.020), and workload(P=.002) were significant. 4. In relation of physical nursing activities and low back pain prevalence, bending (P=.000), trunk twisting(P=.003), stretching(P=.006), and pulling and pushing(P=.046) were significant. 5. Physical nursing activities inducing back stress was varicant according to wards. The results of this study pointed out that the subjects' low back pain prevalence was related to the work-related physiologic and psychologic factors. Therefore, for the effective prevention of low back pain, both practicing the body mechanics and raising the morale of the nurses are needed in educational program.