• Journal of Sensor Science and Technology
• /
• v.22 no.6
• /
• pp.400-403
• /
• 2013

The piezoelectric composite film of ferroelectric PZT ceramic ($PbZr_xTi_{1-x}O_3$) and polymer (PDMS, Polydimethylsiloxane) was prepared to improve the flexibility of piezoelectric material. The bar coating method was applied to fabricate flexible nanocomposite film with large surface area by low cost process. In the case of using metal electrode on the composite film, although there is no problem by bending process, the electrode is usually broken away from the film by stretching process. However, the well-attached, flexible CNT electrode on PZT/PDMS film improved flexibility, especially stretchability. PZT particles was usually settled down into polymer matrix due to gravity of the weighty particle, so to improve the dispersion of PZT powder in polymer matrix, small amount of additives (CNT powder, Carbon nanotube powder) was physically mixed with the matrix. By stretching the film, an output voltage of PZT(70 wt%)/PDMS with CNT (0.5 wt%) was measured.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.477-481
• /
• 1998

Colored components in black tea were extracted, freeze-dried, and analysed to investigate the possibility using as a natural dye. Fractionation of the colored components was carried out by gel permeation chromatography. The colored components in black tea were elected into seven fractions. Each fraction was analyzed by UV spectrophotometer. The early fluted fractions 1-4 did not show any absorption peaks in 320-700 nm and showed the increase in absorption as it approaches to short wavelength and are considered as highly polymerized colored substances. Fractions 5-6 showed tar at 350 m and are considered as thearubigins. Fraction 7 showed absorption peaks at 376 nm and 456 nm and is considered as theaflavin. IR spectra of each fraction show: Strong C=0 stretching band at 1650 cm-1 appears in fractions 1-4, but not in fractions 5-7. Strong C=0 stretching band at 1700 cm-L appears in fraction 3-7. C=0 stretching band at 1610 cm-1 appears as a shoulder in fraction 4 and progressively changes into strong peak in fraction 5-7. From these results, it is assumed that colored components in black tea consist of polyphenolic substances having different molecular weight which were formed during tea manufacturing process. The colorants from black tea infusion were applied to silk, wool, cotton and nylon fabrics. Black tea colorants showed high affinity to wool, silk and nylon, but very low affinity to cotton fabrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2540-2545
• /
• 2015

In this paper, we propose a novel method to extract appendix from ultrasound image automatically to avoid such subjectivity issue. In the process, we apply a series of image processing algorithms such as Ends_in search stretching for emphasizing brightness contrast and binarization, region labelling, and cubic spline interpolation for extracting lower bound fasicia line that is the base of extracting the appendix. Knowing that the appendix is located at the lower organ area below the bottom fascia line, we conduct a series of image processing techniques to find the fascia line correctly. And then we apply ART2 algorithm to the organ area in order to extract appendix accurately. Through experiment, the effectiveness of the proposed method is verified based on the field experts' evaluations.

• Earthquakes and Structures
• /
• v.16 no.5
• /
• pp.547-561
• /
• 2019

In this work, a new analytical approach using a theory of a high order hyperbolic shear deformation theory (HSDT) has been developed to study the free vibration of plates of functionally graduated material (FGM). This theory takes into account the effect of stretching the thickness. In contrast to other conventional shear deformation theories, the present work includes a new displacement field that introduces indeterminate integral variables. During the manufacturing process of these plates defects can appear as porosity. The latter can question and modify the global behavior of such plates. The materials constituting the plate are assumed to be gradually variable in the direction of height according to a simple power law distribution in terms of the volume fractions of the constituents. The motion equations are derived by the Hamilton principle. Analytical solutions for free vibration analysis are obtained for simply supported plates. The effects of stretching, the porosity parameter, the power law index and the length / thickness ratio on the fundamental frequencies of the FGM plates are studied in detail.

• Composites Research
• /
• v.26 no.2
• /
• pp.123-128
• /
• 2013

The PVDF (polyvinylidene fluoride) fibers were prepared using the wet spinning processing. To improve ${\beta}$-phase crystalline which closely related piezoelectric property PVDF wet spun fibers conducted post treatment. Post treatment is consisted of heat stretching and annealing process. The heat stretching and annealing conditions were controlled by changing temperature between glass transition temperature and melting temperature. From these experimental data, the resulting crystal structure of the ${\beta}$-phase crystalline was confirmed by FT-IR and XRD experiments. From these analysis results, optimum stretching and annealing conditions of the wet spun PVDF fibers were founded to increase high ${\beta}$-phase crystalline. Furthermore results showed that thermal processing had a direct effect on modifying the crystalline microstructure and also confirmed that heat stretching and annealing could increase the degree of crystallinity and ${\beta}$-phase crystalline. Finally, piezoelectric constant ($d_{11}$) of the post heat treated PVDF fibers reinforced composite were measured to investigate the feasibility for the sensing materials.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.9-15
• /
• 2011

In this paper, we propose a method to extract the external oblique muscle of abdomen images that is often excluded by previous method due to image distortion. In the preprocessing phase of the proposed method, we emphasize the brightness contrast with Ends-in search stretching algorithm after removing noise from the initial ultrasonic images. Then we apply average binarization in vertical direction to extract candidate fascia areas. After removing other areas than fascia with morphological characteristics, the lost part in the fascia during the process is restored with such characteristic information and location information. Then the skin area is also removed with information from the arc appearing in convex filming and the candidate muscle areas are extracted by overlapping two results two way up-down search algorithm. Another noise removing process is done to determine the muscle area. In case of obtaining obscure result, after restoring the muscle area by smearing method, the thickness of the muscle is measured by min square method. The experiment verifies that the proposed method is sufficiently effective to analyze the size and shape of muscles in abdomen in ultrasonography than previously used methods.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.3
• /
• pp.188-197
• /
• 2012

Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved aluminum plate has been performed only by labor works without systematic technique. Therefore, it is difficult to construct the aluminum ship that the design satisfies both required propulsion performance and hull design. Present study introduces a MPSF (Multi Point Stretching Forming) that is a flexible manufacturing technique to form large sheet panels of doubly curvature. The hull pieces are stretch-formed over the MPSD (multi-point stretching die) generated by the punch element matrix. In this study, MPSF is applied to deform the doubly curved surfaces of aluminum ship. The forming system including FEA (finite element analysis) of the processes for stretching the plate were carried out by static implicit analysis is suggested. Residual deformation of the surface is modeled by an elasto-plastic contact phenomena while the forming process is simulated by FEA. Finally, the proposed system is also validated, comparing the deformed shape by MPSF with that of object surfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.773-774
• /
• 2011

• Composites Research
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2020

In this paper, the microwave irradiation process was conducted during the Poly(vinylidene fluoride) (PVDF) nano-composite film fabrication process to analyze how the β-crystalline is increased. TiO₂ was added as a nanoparticle reinforcement to further improve the β-crystalline conformation of the PVDF films by van der Waals force due to the difference of electronegativity between PVDF and the metal oxide nanoparticle. The crystalline conformation of the fabricated films was analyzed by X-ray diffraction and Fourier transform infrared spectroscopy. According to these analysis results, it was confirmed that the microwave irradiation process during the solvent evaporation process increases the crystallinity of the PVDF films, and more β-crystalline can be obtained after additional film stretching process. It was also found that the PVDF nano-composite films with the metal oxide have relatively higher β-crystalline conformation rather than the neat PVDF films.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.419-422
• /
• 2010

This paper reports a simple and versatile technique for generating highly controllable sinusoidal nanostructures on the surface of poly-(dimethylsiloxane) (PDMS). The sinusoidal features were generated by oxidizing PDMS slabs with oxygen plasma, then stretching them by wrapping around a cylinderical surface, and finally allowing them to relax. The wavelength and amplitude could be finely controlled by varying the fabrication conditions such as duration of oxidation, diameter of the glass cylinder, duration of stretching, thickness of the PDMS slabs, and temperature during the second hardening process. The varied trends of the buckling patterns were characterized by using an atomic force microscope.