• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.48-56
• /
• 2016

In this study, to develop the lattice materials with a low environmental load for restoring the destroyed forest, 7 types of wood-concrete hybrid laminated materials were manufactured with domestic four softwoods, three hardwoods and concrete, and the effects of density of wood species on static bending strength performances were investigated. Bending MOEs of wood-concrete hybrid laminated materials increased with increasing density of wood species on the whole, and the values were higher than that of concrete by hybrid-laminating woods on the concrete. It was found that the measure values of bending MOEs were slightly lower than the calculated values calculated using equivalent cross-section method from MOE of each laminae of hybrid laminated materials and the difference between them was less than 10%. Bending proportional limit stresses of hybrid laminated materials showed 1.2-1.6 times higher than that of concrete by hybrid-laminating. Bending strength (MOR) of hybrid laminated materials increased with the density of wood species. By hybrid-laminating, the MOR of concrete was considerably increased. Therefore, it is considered that wood-concrete hybrid laminated materials can be applied as a materials with a low environmental load and durability for ecological restoration.

• ALGAE
• /
• v.35 no.3
• /
• pp.253-262
• /
• 2020

Haematococcus pluvialis is a commercial microalga that can produce high quantities of astaxanthin. Under induced conditions, some important changes in the subcellular structures related to astaxanthin accumulation were observable. For example, a large number of astaxanthin granules, oil structures and starch granules appeared in the thick-walled cells; Astaxanthin granules gradually dissolved into the oil structures and spread throughout the entire cell with the fusion and diffusion process of oil structures during the middle and late stages of induction; The plastoglobules were closed to the newly formed structures, and some plastoglobules would abnormally increase in size under stress. Based on observations of cell damage, the degradation of membrane structures, such as chloroplasts, was found to be the primary form of damage during the early stage of induction. During the middle stage of induction, some transparent holes were exposed in the dissolving astaxanthin granules in the cytoplasm. In thick-walled cells, these transparent holes were covered by oil substances dissolving astaxanthin, thereby avoiding further damage to cells. Given the relatively few oil structures, in non-thick-walled cells, the transparent holes expanded to form multiple transparent areas, eventually resulting in the rupture and death of cells. These results suggested that the high level of synthesis and the wide range diffusion of oil explained the expansion of astaxanthin in H. pluvialis.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.2
• /
• pp.88-93
• /
• 2015

Objective : Elevated cellular retinoic acid binding protein-I (CRABP-I) is thought to be related to the abnormal proliferation and migration of smooth muscle cells (SMCs). Accordingly, a higher CRABP-I level could cause disorganized vessel walls by causing immature SMC phenotypes and altering extracellular matrix proteins which could result in vulnerable arterial walls with inadequate responses to hemodynamic stress. We hypothesized that elevated CRABP-I level in the cerebrospinal fluid (CSF) could be related to subarachnoid hemorrhage (SAH). Moreover, we also extended this hypothesis in patients with vascular malformation according to the presence of hemorrhage. Methods : We investigated the CSF of 26 patients : SAH, n=7; unruptured intracranial aneurysm (UIA), n=7; arteriovenous malformation (AVM), n=4; cavernous malformation (CM), n=3; control group, n=5. The optical density of CRABP-I was confirmed by Western blotting and presented as mean${\pm}$standard error of the measurement. Results : CRABP-I in SAH ($0.33{\pm}0.09$) was significantly higher than that in the UIA ($0.12{\pm}0.01$, p=0.033) or control group ($0.10{\pm}0.01$, p=0.012). Hemorrhage presenting AVM (mean 0.45, ranged 0.30-0.59) had a higher CRABP-I level than that in AVM without hemorrhage presentation (mean 0.16, ranged 0.14-0.17). The CRABP-I intensity in CM with hemorrhage was 0.21 and 0.31, and for CM without hemorrhage 0.14. Overall, the hemorrhage presenting group (n=11, $0.34{\pm}0.06$) showed a significantly higher CRABP-I intensity than that of the non-hemorrhage presenting group (n= 10, $0.13{\pm}0.01$, p=0.001). Conclusion : The results suggest that elevated CRABP-I in the CSF could be related with aneurysm rupture. Additionally, a higher CRABP-I level seems to be associated with hemorrhage development in vascular malformation.

• Women's Health Nursing
• /
• v.5 no.1
• /
• pp.80-95
• /
• 1999

The purpose of this study was to investigate the characteristics of low birth-weight infants and their's mothers, and to identify the factors which influenced to delivery of L.B.W infants. The data derived from K. General Hospital and J. obs & gyn clinic in pusan from January, 1998 to August, 1998, which were from mothers of having B. W infants. The factors used for this study were characteristics of general, obstetrical, environmental aspects and physical and psychological life experiences during pregnancy. Analysis of data obtained were computerized statistically by using SPSS 7.5 WIN program. the data were analysed as number, frequency, percentage, t-test and ANOVA. The major results obtained of this study were as follows : 1) Gender that L.B.W infants were male in 47.2% and female in 52.8%, body weight of 2001~2500gm was above 8 in 68.5%, and below 5 in 1.8%. The L.B.W infants with complications were 7, which were 6.5%. The kinds of malformations were the Cleft palate & lip, Hyper-kalemia, Hypoglycemia, Meningocele, CHD, Down syndrome and each of them marked 0.9%. 2) In the general characteristics of pregnant women, the age group of 25~29 years was the most common as 46.3%. Over 35 years of age, elderly gravidas were in 7.5%. the height of 156~160cm was the most common as 52.8%. pregnant women of below 150cm height was in 3.7%. body weight of 51~55kg was the most common as 38%. pregnant women of below 45kg were in 19.4%. The women with smoking and drinking episodes during pregnancy were 1.9% and 25%. In the status of marriage, married women were in 95.4%, unmarried ones were in 1.9%, and unmarried couples were in 2.8%. Iin he obstetrical characteristics of pregnant women, pregnant women with gestational age under 37wks were in 45.4%, and the ones over 38wks were 54.6%. At the methods of delivery, normal spontaneous vaginal deliveries were in 51.9%, which were the most common, cesarian section deliveries were in 47.2%, and breech deliveries were in 0.9%. In the environmental characteristics of pregnant women, 40.8% of pregnant women lived in house or apartments with stairs, 23.1% of them lived in the high altitude. the pregnant women who ran a household without a helper were in 65.7%. In the pregnant women who had underwent life experiences of physical and psychological stress during pregnancy. life experiences of physical stresses were described as persistent fatigue due to lifestyle, traumatic experience, illness, move away with an effort, physical impact caused by discord. life experiments of psychological stresses were describeded as trouble with their husbands, discord with one's husband family, family problems, and conflicts due to environmental factors, etc. The number of the pregnant women who had complications during pregnancy was 32, which was 29.6% totally. Among them, pre-eclampsia was in 12.1% and the premature rupture of membrane in 7.4%. 3) In the analysis of the general, obstetrical, and circumstantial characteristics and L.B.W infants. There were statistical difference significantly between the gestational age of pregnant women(F=12.035, P=.000), and the status of marriage(F=3.207, P=.044), and maternal complication(t=2.344, P=.021) etc.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.13-22
• /
• 2007

This study was carried out to scrutinize possibility of manufacturing pitch pine (Pinus rigida) glued laminated timber in order to add values of pitch pine trees. Also, it was investigated to improve bending performance of pitch pine glulam. Pitch pine was imported as one of major plantation species in Korean peninsula. Machine stress rated grades of pitch pine lumber mostly ranged between E7 and E9. which grades were more or less inferior to producing high quality glulam. However, the adhesive properties between pitch pine and pitch pine, and between pitch pine and Japanese larch (Larix kaempferi Carr.), such as shear bond strength, wood failure rate and de-lamination rate of bonded layer submerged in cold and boiling water, were higher than Korean Standard criteria. These properties are essential for manufacturing glulam with single species or multiple species. The modulus of rupture (MOR) of pitch pine glulam exceeded the criterion of Korean Standard for glulam strength grade but modulus of elasticity (MOE) was lower than the criterion. On the other hand, the bending performances (MOR and MOE) were improved 20 percent by mixing with Japanese larch laminar. It is effective to arrange higher quality Japanese larch laminar at the outer layer of glulam for improving bending performances. In conclusion, it is possible to use low quality pitch pine as laminar of structural glulam for adding values of pitch pine.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.635-642
• /
• 2014

In this paper, an efficient technique is developed to predict failure probability of three failure modes(case rupture, fracture and bolt breakage) related to solid rocket motor case due to the inner pressure during the mission flight. The overall procedure consists of the steps: 1) design parameters affecting the case failure are identified and their uncertainties are modelled by probability distribution, 2) combustion analysis in the interior of the case is carried out to obtain maximum expected operating pressure(MEOP), 3) stress and other structural performances are evaluated by finite element analysis(FEA), and 4) failure probabilities are calculated for the above mentioned failure modes. Axi-symmetric assumption for FEA is employed for simplification while contact between bolted joint is accounted for. Efficient procedure is developed to evaluate failure probability which consists of finding first an Most Probable Failure Point(MPP) using First-Order Reliability Method(FORM), next making a response surface model around the MPP using Latin Hypercube Sampling(LHS), and finally calculating failure probability by employing Importance Sampling.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.527-535
• /
• 2021

Lysosomes are organelles surrounded by membranes that contain acid hydrolases; they degrade proteins, macromolecules, and lipids. According to nutrient conditions, lysosomes act as signaling hubs that regulate intracellular signaling pathways and are involved in the homeostasis of cells. Therefore, the lysosomal dysfunction occurs in various diseases, such as lysosomal storage disease, neurodegenerative diseases, and cancers. Multiple forms of stress can increase lysosomal membrane permeabilization (LMP), resulting in the induction of lysosome-mediated cell death through the release of lysosomal enzymes, including cathepsin, into the cytosol. Here we review the molecular mechanisms of LMP-mediated cell death and the enhancement of sensitivity to anticancer drugs. Induction of partial LMP increases apoptosis by releasing some cathepsins, whereas massive LMP and rupture induce non-apoptotic cell death through release of many cathepsins and generation of ROS and iron. Cancer cells have many drug-accumulating lysosomes that are more resistant to lysosome-sequestered drugs, suggesting a model of drug-induced lysosome-mediated chemoresistance. Lysosomal sequestration of hydrophobic weak base anticancer drugs can have a significant impact on their subcellular distribution. Lysosome membrane damage by LMP can overcome resistance to anticancer drugs by freeing captured hydrophobic weak base drugs from lysosomes. Therefore, LMP inducers or lysosomotropic agents can regulate lysosomal integrity and are novel strategies for cancer therapy.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.211-215
• /
• 1985

The effects of temperature and strain rate on the I-SCC behaviors of Zircaloy-4 were investigated by constant load test at 30$0^{\circ}C$ and constant elongation rate test at 300, 350 and 40$0^{\circ}C$ in 3.34mg $I_2$/㎤. The results showed that I-SCC susceptibility increased as the strain rate decreased or the temperature increased. The empirical relation between the stress and the time to failure at 30$0^{\circ}C$ was given by 1/ $t_{f}$∝exp (0.3$\sigma$/$\sigma$$_{UTS}$-31.5) When the I-SCC susceptibility was expressed by the ratio of fracture energy in iodine atmosphere to that in the inert atmosphere, severe I-SCC susceptibility was found near 7.6$\times$10$^{-6}$ sec at 30$0^{\circ}C$ and the maximum point of I-SCC susceptibility tended to shift to the higher strain rate with increasing the temperature. The quasi-cleavage fracture was observed in I-SCC fracture surface. From these results, it was certain that the film repture step was involved as an important process in the I-SCC mechanism of Zircaloy-4.4.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.148-157
• /
• 2008

To describe the lifetime prediction of gas turbine core parts serviced in some ten thousands rpms at over $1,000^{\circ}C$, the Larson-Miller Creep Curves, which are formed by creep rupture tests as the destructive experiment with parameters of stress and temperature, are used often, but not exact and reliable with errors of over some tens. On the other hand, this study shows a non-destructive method with increased accuracy and reliability. The SEM and TEM specimens were extracted by replica after polishing the local airfoil and root surfaces of the first stage scraped blade (bucket), serviced for 18,000 hours at $1,280^{\circ}C$ in Gas Turbines of Boryong. The observed TEM and SEM precipitates were digitalized for calculation of the average size. Here we could find the precipitate size grown from $0.45{\mu}m$ to $0.6{\mu}m$ during service and the grown precipitates to be still sound. From these results we could conclude that the scraped balde can be used for ten thous and hours additionally and for twenty thousand hours by additional heat treatments on the scraped blade.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.163-167
• /
• 2003

Purpose: The purpose of this study is to describe causes and injury mechanisms during inline skating and to find preventive measures .Materials and Methods: We have carefully selected 57 patients who have been treated in our hospital and nearby hospital. There are 37 males and 20 females, and mean age is 9 years 9 months (range,6-40 years old) . We have meticulously investigated their injured sites, their favorite location for inline skating , their use of protective means while they were on the wheels and their injury mechanisms . Results: Injury consisted of 50 fractures,1 meniscal tear,2 medial collateral ligament rupture and 4 contusion or sprain. Fracture sites varied as follows : 33(66$\%$) cases in distal radius and ulna,5(10$\%$) in elbow. 3(6$\%$) in diaphysis of humerus, etc Location at the time of injury varied as follows : 22 cases(39$\%$) in their apartment complex, 19 cases in (33$\%$) narrow streets, and 16 cases(28$\%$) in parks Only five patients admitted that any means of protection were used.2 cases only had knee pad on , 1 case put on elbow pad in addition, and 2 cases put on wrist guard as well. However none of the patients had helmet on Conclusion: We would strongly like to stress the importance of using sufficient protections and of choosing area where it is safe to ride, in order to reduce the risk of accidents. In addition, continuous and effective prior education from inline skate circles may be in order before riding the inline skate.