• 폴리머
• /
• 제36권6호
• /
• pp.685-692
• /
• 2012

사출성형공정은 충전, 보압, 냉각, 이형 및 취출 순서로 이루어진다. 이러한 공정 중 보압단계에서 캐비티 내에 가장 큰 압력이 주어진다. 따라서 캐비티 내압은 보압전환 시점과 보압의 크기에 가장 크게 영향을 받는다. 캐비티의 큰 내압은 금형에 큰 응력을 집중시켜 금형을 손상시킬 우려가 있으므로 캐비티 내압을 관찰하고 조절하는 것은 매우 중요하다. 본 연구에서는 이론해석과 실험을 통하여 보압전환 시점과 보압의 크기에 따라 캐비티 내압을 분석하였다. 보압전환 시점이 늦어짐에 따라서 내압이 증가하였다. 또한 보압전환이 늦어지면서 충전시간이 길게 되어 전체적으로 압력을 받는 시간이 길어져 보압 이후 냉각이 끝난 후에도 잔여압력이 존재하였다. 캐비티 내의 압력은 보압크기가 커질수록 비례적으로 증가하는 경향을 보였다. 역시 보압의 크기가 클수록 냉각 후 잔여압력이 증가하였다. 결과적으로 보압전환 시점이 늦고 보압크기가 크면 캐비티 내에 높은 압력이 형성되고 냉각이 끝난 후에도 잔여압력이 존재함을 알 수 있었다. 실험과 해석을 비교해 보았을 때 전체적인 경향은 매우 유사하였으나 해석에서는 잔여압력을 예측하지 못하였다. 캐비티 내압 조절을 위해서는 보압조건의 설정이 중요하며 CAE 해석을 통하여 최적 조건 설정이 가능함을 알 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권1호
• /
• pp.9-16
• /
• 2015

The applications of Global Navigation Satellite System (GNSS) receivers are becoming wider in various commercial and military systems including even small weapon systems such as artillery shells. The precision-guided munitions such as Small Diameter Bomb (SDB) of United States can be used for pinpoint strike by acquiring and tracking GNSS signals in high mobility situation. In this paper, a small GNSS receiver with embedded interference suppression capability working under high dynamic stress is developed which is applicable to the various weapon systems and can be used in other several harsh environments. It applies a kind of matched filter and multiple correlator schemes for fast signal acquisition and tracking of even weak signals and frequency domain signal processing method to eliminate the narrowband interference. To evaluate the performance of the developed GNSS receiver, the test scenario of high mobility and interference environment with the GNSS simulator and signal generator is devised. Then, the signal acquisition time, navigation accuracy, sensitivity, and interference suppression performances under high dynamic operation are evaluated. And the comparison test with the commercial GNSS receiver which has high sensitivity is made under the same test condition.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.154-166
• /
• 2004

본 연구에서는 측압이 매우 큰 암반에 대규모 유류저장공동을 병렬로 굴착할 경우, 공동 및 지보재의 역학적 안정성을 평가하였다. 수치해석적인 방법을 동원하여 공동 주변 암반의 거동을 분식하고, 주된 지보재인 rockbolt와 숏크리트의 역할을 분석하였으며, 각 지보재의 안정성을 평가하였다. 적정한 지보시스템 구축을 위하여 지보재 모델링 기법, 공동 단면 형상, 지보재의 규격 등이 공동의 안정성에 미치는 영향을 파악하였다. 해석결과 지보재의 타설시기와 다단계 굴착에 따른 공동 형상의 변화가 지보재에 발생하는 응력에 큰 영향이었음을 알 수 었었으며, 강섬유보강 숏크리트의 변형 및 파괴 특성을 고려한 해석기법 개발의 필요성을 확인하였다.

• 한국습지학회지
• /
• 제22권2호
• /
• pp.113-120
• /
• 2020

본 연구에서는 국가적색목록 취약종(VU)인 꼬리명주나비와 그것의 유일한 먹이 식물인 쥐방울덩굴의 보전을 위하여, 수변 지역에 서식하는 쥐방울덩굴의 서식지 환경과 이들 중 생육과 생식에 영향을 미치는 주요 환경 요인을 파악하고자 하였다. 이를 위하여 네 개의 국내 쥐방울덩굴 서식지(가평, 평택, 청주, 여주)에서 2018년 7월과 10월에 방형구 조사를 수행하였으며, 주요 동반종, 초식 곤충의 출현 여부, 지지대의 유형, 토양의 이화학적 특성을 조사하였다. 조사결과 쥐방울덩굴 개체군의 서식지 환경과 생육 및 생식 양상은 지역에 따라 다르게 나타났다. 특히, 평택 개체군에서 가장 빠른 생육 속도와 개화 및 결실 시기를 나타냈으며, 청주와 여주 개체군에서는 인간의 교란으로 인한 지상부 손상이 원활한 생육을 방해한 것으로 드러났다. 본 연구에서 쥐방울덩굴의 생육 속도는 쥐방울덩굴의 초기 생육 시기부터 제공된 지지대의 유형에 영향을 받은 것으로 판단된다. 쥐방울덩굴의 개화 및 결실 시기에는 경쟁과 섭식 스트레스의 생물적 요인과 높은 토양 양이온 함량의 비생물적 요인이 복합적으로 작용한 것으로 여겨진다. 따라서 쥐방울덩굴 개체군의 빠른 생육과 적절한 시기의 개화와 결실을 위해서 안정적인 지지대의 제공과 경쟁과 섭식 스트레스의 완화를 위한 노력이 필요할 것으로 보인다.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.3-12
• /
• 1999

The larger, loftier and more highly strengthened the recent structures become, the greater attention is paid to the problem of thermal crack occurrence associate with hydration heat. As one of methods to solve the problem, a care has been taken to the improvement of construction such as the application of pre-cooling or pipe-cooling, adjustment of concrete block size, concrete placement timing, joint arrangement and so on. But it is expected that a proper selection of cement shall additionally contribute to the control of thermal cracks. In this study, thus, we selected 4 types of cements such as Type V for anti-sulphate, blast furnace cements (slag content of 45% and 65% respectively)and ternary blended low heat cement, and carried out mock-up tests. In every assigned time, temperatures and thermal stresses were measured and calculated from raw data. As a result of measurement, it was found that the magnitude of hydration heat is in order of blast furnace slag cement. Type V and ternary blended low heat cement. Results of thermal stresses were same as the order of temperature. In addition, thermal stresses calculated from the data of strain gauges showed almost similar to those measured from effective stress gauges only when strain values were adjusted properly in accordance with initial time of stress appearance. Theoretical results agreed well with the measured values comparatively, but showed slight differences. It is inferred that these differences shall be reduced if more tests capable of evaluating thermal characteristics of concrete are carried out.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.425-441
• /
• 2010

Forages are the backbone of sustainable agriculture. They includes a wide variety of plant species ranging from grasses, such as tall fescue and bermudagrass, to herbaceous legumes, such as alfalfa and white clover. Abiotic stresses, especially salinity, drought, temperature extremes, high photon irradiance, and levels of inorganic solutes, are the limiting factors in the growth and productivity of major cultivated forage crops. Given the great complexity of forage species and the associated difficulties encountered in traditional breeding methods, the potential from molecular breeding in improving forage crops has been recognized. Plant engineering strategies for abiotic stress tolerance largely rely on the gene expression for enzymes involved in pathways leading to the synthesis of functional and structural metabolites, proteins that confer stress tolerance, or proteins in signaling and regulatory pathways. Genetic engineering allows researchers to control timing, tissue-specificity, and expression level for optimal function of the introduced genes. Thus, the use of either a constitutive or stress-inducible promoter may be useful in certain cases. In this review, we summarize the recent progress made towards the development of transgenic forage plants with improved tolerance to abiotic stresses.

• 한국농공학회지
• /
• 제28권3호
• /
• pp.79-88
• /
• 1986

Drought occurs most frequently and severely around transplanting season of the rice plants in Korea. Shortage of water due to drought for the paddy fields often delays transplanting, and less often the rice plants are subjected to water stress after delayed transplanting. The present study aimed at quantification of the rice crop loss due to delayed transplanting, different inten3ity of water stress, and the combined effect of delay in transplanting followed by water stress for better use of limited water for irrigation under drought. The rice variety Chucheong, a japonica, and Nampung, an indica x japonica, were grown, transplanted to 1/200 a plastic pots, and subjected to different timing of transplanting and degree of water stress under a rainfall autosersing, sliding clear plastic roof facility with completely randomized arrangement of 5 replications. The results obtained are summarized as follows: 1.Twelve days or 22 days delay in transplanting without water stress reduced rice yield by 25% and 43% in the japonica variety, and by 15% and 60% in the indica x japonica variety. 2.The 10 days or 20 days water stress developed without irrigation after drainage in the rice plants transplanted at proper time lowered the water potential at the paddy soil 10cm deep to -4 bar, and -12 bar and caused rice yield reduction by 14%, and 45% in the japonica variety and by 8%, and 50% in the indica X japonica variety. 3.The 12 days delay in transplanting and 10 days or 20 days water stress reduced rice yield by 39% and 59% in the japonica variety, and by 38% and 52% in the indica x japonica variety. The 22 days delay in transplanting plus 10 days water stress caused yield reduction by 76%, i.e. meaningless yield, in both varieties. 4.The intermittent irrigation just to wet the soil body for 10 days after 10 days water stress without irrigation increased rece yield by 12 to 16% compared to the rice plants water stessed without irrigation continuously for 20 days in both varieties respectively. 5.The above results suggest strongly 1) to transplant the rice plants at proper .time even with some water stress rather than delay for sufficient water from later rainfall, and 2) to distribute insufficient irrigation water to broader area of transplanted rice with limited irrigation for better use of limited irrigation water. A greater sensitivity of japonica variety to a moderate water stress than the indica X japonica variety during initial rooting and tillering stage was noticed. To cope with frequent drought in rice culture, firstly the lasting time of transplanting without yield reduction should be clarified by region and variety, and secondly a scheme of rational distribution of limited water should be developed by region with better knowledge on the varietal distribution of limited water should be developed by region with better knowledge on the varietal responses to varying intensity of water stress.

• 한국작물학회지
• /
• 제41권2호
• /
• pp.168-172
• /
• 1996

콩품종 타치나가하(Tachinagaha)를 공시하여 토양수분조건에 따른 식물체내의 수분상태 즉 잎의 수분 potential, 광합성 및 생육에 미치는 영향을 검토하고자 실험을 수행한 결과를 요약하면 다음과 같다. 1. 광량자밀도가 1,000$\mu$mol m$^{-2}$ s$^{-1}$ 이하로 낮아질 때 광합성 속도는 점차 저하하였고, 토양수분 조건에 따른 광합성 속도는 건조구와 과습구는 적습구보다 떨어졌다. 2. 생육시기에 관계없이 광합성 속도와 기공 conductance와는 정의 상관 관계가 인정되었다. 3. 광합성 속도와 기공 conductance는 토양수분 부족에 매우 민감하게 반응하였다. 4. 잎의 수분 potential은 적습구가 과습구 또는 건조구보다 높았으며, 광합성 속도와도 밀접한 관련이 있었다. 5. 잎의 신장은 토양수분에 민감한 반응을 보여 건조구에서 엽면적이 가장 낮았으나 엽록소 함량은 높았다. 6.식물체의 총 건물중은 적습구 > 과습구 > 건조구 순이었으나 건물중에 대한 뿌리의 비율은 건조구에서 높게 나타났다

• 한국농공학회논문집
• /
• 제62권3호
• /
• pp.51-61
• /
• 2020

Drought events are not clear when those start and end compared with other natural disasters. Because drought events have different timing and severity of damage depending on the region, various studies are being conducted using satellite images to identify regional drought occurrence differences. In this study, we investigated the applicability of drought assessment using the Evaporative Stress Index (ESI) based on Moderate Resolution Imaging Spectroradiometer (MODIS) satellite images. The ESI is an indicator of agricultural drought that describes anomalies in actual and reference evapotranspiration (ET) ratios that are retrieved using remotely sensed inputs of Land Surface Temperature (LST) and Leaf Area Index (LAI). However, these approaches have a limited spatial resolution when mapping detailed vegetation stress caused by drought, and drought hazard in the actual crop cultivation areas due to the small crop cultivation in South Korea. For these reasons, the development of a drought index that provides detailed higher resolution ESI, a 500 m resolution image is essential to improve the country's drought monitoring capabilities. The newly calculated ESI was verified through the existing 5 km resolution ESI and historical records for drought impacts. This study evaluates the performance of the recently developed 500 m resolution ESI for severe and extreme drought events that occurred in South Korea in 2001, 2009, 2014, and 2017. As a result, the two ES Is showed high correlation and tendency using Receiver Operating Characteristics (ROC) analysis. In addition, it will provide the necessary information on the spatial resolution to evaluate regional drought hazard assessment and and the small-scale cultivation area across South Korea.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.657-663
• /
• 2006

By measuring concrete temperature and strains of concrete and reinforcing bars throughout gages embedded and also by observing the crack occurrence, this study aims at the characteristics of structural behavior of subway wall structure in associate with concrete ages. The length of 23.5m, thickness of 2.0m of real subway custody line was selected as a representative structure and 7 thermocouples and 6 strain gages were installed to measure the behavior of wall structure. The results were compared and verified with analytical results using MIDAS in order to show their usefulness. It was found that only attachment of strain gages on the surface of reinforcing bars can figure out the timing of crack occurrence and hydration heat program is useful to estimate comparatively exact magnitudes of temperature. Since estimated time of crack occurrence throughout thermal stress analysis depends on the period of transferred thermal stress from concrete to reinforcing bars, however, cracks from naked eyes were identified later than analytical results. Cracks were observed first at the center of wall line and then to the end of line symmetrically.