• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.106-117
• /
• 1992

In this study, the propagation behaviour and the closure phenomena of physically small surface cracks were investigated by the techinque of the Kikukawa-unloading elastic compliance method using a back face strain gage. The surface cracks initiated and propagated from notched specimens under constant amplitude bending load. The crack shape (aspect ratio) with approximately semi-circular at the early stage was changed to semi-elliptical as the cracks grew larger. The crack depth (a) could be expressed uniquenly by the crack length (c). The dependence of the crack propagation rate on the stress ratio R was strongly related in the lower ${\Delta}K$ range. The deceleration of the surface crack propagation rate was prominent in lower R during the crack length was small. When the propagation rate was rearranged with the effective stress intensity factor range ${\Delta}$K_{eff} the dependence of the crack propagation rate on the stress ratio R was found to be diminshed. These were caused by the crack closure phenomena that was most prominent at the lower propagation rate. The mechanism of crack closure phenomena was dominated by the plasticity-induced mechanism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3216-3223
• /
• 2012

Deep cement mixing method (DCM) is one of the most effective improving methods for deep soft ground. The strength of soft soil can be increased in a short period of time with less noise and vibration. However, it is necessary to determine the stress transferring and concentration ratio of the composite soft ground for estimating the settlement behaviors. In this study, a model test was undertaken to investigate the stress distribution of the improved soil. Results of the model test shows that stresses were concentrated mainly on the improved areas by DCM and the concentration ratios (35.4, 28.6, 27.02) were obtained using several different techniques. These were well in accordance with other previous research results (26.52, 32.5).

• Tunnel and Underground Space
• /
• v.25 no.3
• /
• pp.231-243
• /
• 2015

In this study, both in-situ stress measurements and a lot of laboratory rock tests were conducted at a metal mine in Jeongseon, Korea. The stress ratio obtained from in-situ stress measurements showed a tendency to decrease according to depth below surface and its average value was 1.10. The mechanical properties such as unit weight, absorption ratio, porosity, elastic wave velocity, uniaxial compressive strength, Young's modulus, Poisson's ratio, tensile strength, shore hardness, friction angle and cohesion were investigated for the four different rocks mainly distributed at a studied mine, which were dolomite, felsite, granite and magnetite. The mechanical properties of the four different rocks were compared by means of statistical analyses, whereupon the felsite and the granite turned out to have more strength characteristics than the magnetite. The correlation of mechanical properties was also investigated, whereupon a few results against the general correlation were found out. The failure criteria of the four different rocks were finally discussed by means of both Mohr-Coulomb criterion and Hoek-Brown criterion.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1169-1177
• /
• 2007

The main objective of this research was to evaluate the effects of process variables which were forming ability, flow displacement, effective stress, effective strain, fluid vector and products defects on manufactured artificial lightweight aggregate made of both incinerated sewage sludge ash and clay by means of the numerical analysis of a rigid-plastic finite element method. CATIA (3D CAD program) was used for an extrusion metal mold design that was widely used in designing aircraft, automobile and metallic molds. A metal forming analysis program (ATES Co.) had a function of a rigid-plastic finite element method was used to analyze the program. The result of extrusion forming analysis indicated clearly that a shape retention of the manufactured artificial light-weight aggregate could be maintained by increasing the extrusion ratio (increasing compressive strength inside of extrusion die) and decreasing the die angle. The stress concentration of metal mold was increased by increasing an extrusion ratio, and it was higher in a junction of punch and materials, friction parts between a bottom of the punch and inside of a container, a place of die angle and a place of die of metal mold. Therefore, a heat treatment as well as a rounding treatment for stress distribution in the higher stress concentration regions were necessary to extend a lifetime of the metallic mold. A deformity of the products could have made from several factors which were a surface crack, a lack of the shape retention and a crack of inside of the products. Specially, the surface crack in the products was the most notably affected by the extrusion ratio.

• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.93-108
• /
• 1998

In this study, the analytic solutions and numerical methods were used to estimate the shape and size effects on the stability of underground openings. The stability of underground openings was evaluated by scrutinizing the effects of the rock mass quality, the state of in-situ stresses and the lateral earth pressure coefficient on the displacement, the stress concentration and the plastic region developed in the vicinity of the openings. The analytic solutions have shown that the stress concentration factor is inversely proportional to the radius of curvature of openings. Through parametric study on the various shapes and sizes of underground openings the characteristics of the controlling factors concerned with the stability were analyzed. Then, the study was extended to the horseshoe-shaped openings commonly used for under ground storage. Through the extended study the effects of the stress ratio and the height-towidth ratio of openings on the maximum displacement and plastic region developed around the openings were estimated. The results have shorn that the height-to-width ratio of domestic storage caverns can be increased economically without stability problem, as far as the lateral earth pressure coefficient is appropriate.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.7
• /
• pp.35-45
• /
• 2011

Cost effective design and construction are necessary to establish the design concept of tunnel lining. Loosening load acting on the concrete lining is compared with Terzaghi tunnel theory and numerical analysis. It is analyzed under the condition of weathered rock and soil with varying in-situ stress ratio ($K_0$). Based on the result, loosening load calculated by Tcrzaghi tunnel theory is much greater than numerical analysis results. And the load calculated in weathered soil is lager than weathered rock condition. As in-situ stress ratio increases, the stress acting on the tunnel lining decreases in Terzaghi theory rapidly, whereas there is little effect in numerical analysis.

• Journal of Korean Academy of Nursing
• /
• v.35 no.4
• /
• pp.672-679
• /
• 2005

Introduction. Cardiovascular disease has the potential to lead to sudden in-flight incapacitation and permanent grounding. The aims of this study are to examine the relationships between lifestyle, job stress and blood lipid levels of male aircrew personnel of a Korean airline and to identify which factors influence their hyper-lipidemia. Methods. Two hundred sixteen male aircrew personnel completed a questionnaire by self-report and consented to participate in the study. The questionnaire collected data related to job stress, life style, serum cholesterol levels and general characteristics of the aircrew. The cholesterol levels of the subjects were collected from their most recent health check-up records. Subjects were divided into two groups (the desirable group and the risk group) based on their serum cholesterol level, 200 mg/dl. Results. Mean age and marital status were significantly different between the two groups. More subjects in the risk group had habits of eating high lipid foods, while more subjects in the desirable group exercised more frequently than the risk group. In logistic regression analysis, after controlling age and marital status, types of working situation (domestic duty or international duty, odds ratio=.390, p=.018), diet (odds ratio=.429, p=.037), and exercise (odds ratio=.320, p=.055) were influencing factors on aircrew's serum cholesterol lev-els. Conclusions. The cholesterol level of aircrew personnel is closely related to their lifestyle, such as lipid diet and exercise. The type of work situations, e.g. staying in an airplane for long periods of time or staying abroad, may influence these diet patterns and exercise habits.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• Asia-Pacific Journal of Business
• /
• v.14 no.1
• /
• pp.149-169
• /
• 2023

Purpose - The main purpose of this study is to develop the stress test model for Korean banks by exploring the optimal Monte Carlo simulation and BIS forecasting model. Design/methodology/approach - This study selects 15 Korean banks as sample financial firms and collects relevant 76 quarterly data for the period between year 2000 and 2018 from KRX(Korea Excange), Bank of Korea, and FnGuide. The Regression analysis, Unit-root test, and Monte Carlo simulation are hired to analyze the data. Findings - First, most of the sample banks failed to keep 8% BIS ratio for the adverse and severely Adverse Scenarios, implying that Korean banks must make every effort to realize better BIS ratios under adverse market conditions. Second, we suggest the better Monte Carlo simulation model for the Korean banks by finding that the more appropriate volatility should be different depending on variables rather than simple two-sigma which has been used in the previous studies. Third, we find that the stepwise regression model is better fitted than simple regression model in forecasting macro-economic variables for the BIS variables. Fourth, we find that, for the more robust and significant statistical results in designing stress tests, Korean banks are required to construct more valid time-series and cross-sectional data-base. Research implications or Originality - The above results all together show that the optimal volatility in designing optimal Monte Carlo simulation varies depending on the country, and many Korean banks fail to pass sress test under the adverse and severely adverse scenarios, implying that Korean banks need to make improvement in the BIS ratio.

• Journal of Life Science
• /
• v.18 no.12
• /
• pp.1705-1711
• /
• 2008

To investigate the relationship between cold stress and the activity of ascorbate peroxidase(APX), dehydroascorbate reductase (DHAR), mRNA expression level of two enzymes, hydrogen peroxide content was studied in lettuce leaves under stress condition imposed by cold stress at $4^{\circ}C$ for 24 hr in the dark and following recovery at $20^{\circ}C$ from cold stress. Hydrogen peroxide content increased gradually in lettuce leaves during cold stress, but decreased slightly following recovery from cold stress. Soluble protein content, however, decreased gradually during cold stress, and then rapidly returned to normal levels following recovery. Total chlorophyll content decreased gradually during cold stress, and then keep constant following recovery. The patterns of chlorophyll a and b content similar to that of total chlorophyll content, and carotenoid content didn't change. The ratio of chlorophyll a and total chlorophyll was increased during cold stress, but decreased with rapid during cold stress, and then the ratio returned to normal levels following recovery. During cold stress, the activity of APX and DHAR in the lettuce leaves increased dramatically, and also transcript levels of mRNA of APX and DHAR, as determined by probing 32P-labeled single stranded RNA of APX and DHAR, highly increased and returned to normal levels following recovery, respectively. Relationship between APX and DHAR activity and hydrogen peroxide highly related ($R^2$=0.8715 and 0.8643), whereas between hydrogen peroxide and total chlorophyll content and soluble content related reversely ($R^2$=0.5021 and 0.8915).