• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.85-95
• /
• 2018

Water affects the mechanical properties of coal and stress wave propagation. To comprehensively investigate the effect of water content on the properties of coal, laboratory tests including X-Ray Diffraction (XRD) analysis, P-wave test, S-wave test, static and dynamic compression test with different water contents were conducted. The compressive strength, elastic modulus and failure strain and their mechanism of coal specimen under coupled static-dynamic load with the increased water content were observed. Meanwhile, energy transmission and dissipation characteristics of a stress wave in coal specimens with different water contents under dynamic load and its relation with the failure features, such as fragmentation and fractal dimension, of coal was analyzed. Furthermore, the dynamic interpretation of water infusion to prevent coal burst based on water infusion model of coal seam roadway was provided.

• 대한불안의학회지
• /
• 제18권2호
• /
• pp.80-91
• /
• 2022

Objective : Hospital workers' mental health has deteriorated because of the ongoing COVID-19 pandemic. The purpose of this study was to investigate the impact of the prolonged COVID-19 pandemic on the mental health of hospital workers and its determinants. Methods : Two surveys were conducted among employees working in a hospital that received COVID-19 patients from the early phase of the pandemic in South Korea. Data on demographics, perceived threat, workplace evaluation, resilience, and mental health status were collected using the Korean General Health Questionnaire-20 in the initial phase (February 2020) and during the third wave of COVID-19 (December 2020) for 467 and 545 workers, respectively. The mental health of hospital workers in the two phases was compared, and the risk and protective factors during the third wave were investigated. Results : The proportion of patients in the psychiatric high-risk group increased from 2.8% in the initial phase to 11.4% during the third wave. The perceived threat, workplace evaluation, and resilience of respondents deteriorated. Risk factors for mental health during the third wave included the perceived threat items of job stress, loss of control, and considering resignation. Protective factors included presence of children, workplace satisfaction, and hardiness in resilience. Conclusion : Hospital workers' mental health deteriorated as the pandemic progressed. General stress and tension such as job stress, loss of control, considering resignation rather than COVID-19-specific stress had negative effects on mental health of hospital workers. Therefore, care for work stress itself can be helpful to maintain the mental health of hospital workers. Also, governance to improve workplace satisfaction or hardiness in resilience can be a potential protective factor for hospital workers' mental health during the prolonged pandemic.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.9-19
• /
• 1989

본 논문에서는 복합 적층판의 이론적 충격 응답을 통한 충격 응력 및 충격파 전파를 해석하기 위하여 이질, 이방성 판에 전단 변형을 고려한 Whitney와 Pagano의 이론에 기초를 두고 정적 접촉법칙과 연계한 동적 유한요소해석(FEA)을 하여, 이 중 충격 접촉력에 관하여는 각각 [0。/45。/0。/-45。/0。]$_{2s}$와 [90。/45。/90。/-45。/90。]$_{2s}$의 두 적층 형태를 가지는 흑연/에폭시와 유리/ 에폭시 복합 재료에 대한 강구에 의한 충격 해석을 하여, Yang의 식에 의한 최대 접촉력과 비교 검토하였고, 다음 변형율 파형을 파동 전파(wave propagation) 이론에 의해 비교 검토하므로써 본 이론해석의 타당성을 입증하였고, 재료 및 적층 형태에 따른 충격 응답, 충격 응력 및 충격파 전파 특성에 대하여 연구하였다.하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1338-1342
• /
• 2006

This paper presents the theoretical approach to describe the wave propagation in the waveguide with varying cross-section. The waveguides considered in this paper are stepped-rod, tapered-rod, and stepped rod with a tapered section at the middle of wave-transmission. The wave transmission ratio for displacement, stress, and power was calculated for these three rods. The distribution of the stress and displacement along the stepped rod with a tapered section was calculated and compared with the results obtained by FEM analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.55-61
• /
• 2000

Tungsten heavy metal is characterized bi a high density and novel combination of strength and ductility. Among them, 90W-7Ni-3Fe is used for applications, where the high specific weight of the material plays an important role. They are used as counterweights, rotating inertia members, as well as for defense purposes(kinetic energy penetrators, etc.). Because of these applications, it is essential to detemine the dynamic characteristics of tungsten alloy. In this paper, Explicit FEM(finite element method) is employed to investigate the dynamic characteristics of tungsten heavy metal under base of stress wave propagation theory for SHPB, and the model of specimen is divided into two parts to understand the phenomenon that stress wave penetrates through each tungsten base and matrix. This simulation results were compared to experimental one and through this program the dynamic stress-strain curve of tungsten heavy metal can be obtained using quasi static stress-strain curve of pure tungsten and matrix.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.987-995
• /
• 2018

In this study, a relationship between small-strain shear modulus ($G_{max}$) and overconsolidation ratio (OCR) based on shear wave velocity ($V_S$) measurement was established to identify the stress history of centrifuge model ground. A centrifuge test was conducted in various centrifugal acceleration levels including loading and unloading sequences to cause various stress histories on centrifuge model ground. The $V_S$ and vertical effective stress were measured at each level of acceleration. Then, a sensitivity analysis was conducted using testing data to ensure the suitability of OCR function for the tested cohesionless soils and found that OCR can be estimated based on $V_S$ measurements irrespective of normally-consolidated or overconsolidated loading conditions. Finally, the developed $G_{max}$-OCR relationship was applied to centrifuge models constructed and tested under various induced stress-history conditions. Through a series of tests, it was concluded that the induced stress history on centrifuge model by compaction, g-level variation, and past overburden load can be analysed quantitatively, and it is convinced that the OCR evaluation technique will contribute to better interpret the centrifuge test results.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.69-79
• /
• 1996

Dynamic stress intensity factors are derives when the crack is propagating with constant velocity under longitudinal shear stress in orthotropic disk plate. General stress fields of crack tip propagating with constant velocity and least square method are used to obtain the dynamic stress intensity factor. The dynamic stress intensity factors of GLV/GTV=1(=isotropic material or transversely isotropic material) which is obtained in out study nearly coincides with Chiang's results when mode Ⅲ stress is applied to boundary of isotropic disk. The D.S.I.F. of mode Ⅲ stress is greater when α(=angle of crack propagation direction with fiber direction) is 90° than that when α is 0°. In case of a/D(a:crack length, D:disk diameter)<0. 58, the faster crack propagation velocity, the less D.S.I.F. but when crack propagation velocity arrive on ghear stress wave velocity, the D.S.I.F. but when crack propagation velocity arrive on shear stress wave velocity, the D.S.I.F. unexpectedly increases and decreases to zero.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.295-302
• /
• 2020

In this paper, theoretical approach with applications of the periodic wave solutions in an elastic material is applied by study the effect of initial stress, and rotation, on the radial displacement and the corresponding stresses in non-homogeneous orthotropic material. An Analytical solution for the elastodynamic equation has obtained concerning the component of displacement. The variations of stresses and displacements have shown graphically. Comparisons with previously published results in the absence of initial stress, rotation and non-homogeneity have made. Finally, numerical results have given and illustrated graphically for each case considered.

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.911-930
• /
• 2016

The main purpose of this paper is to study the effects of initial stress, gravity, anisotropy and porosity on the propagation of shear wave (SH-waves) in a fiber-reinforced layer placed over a porous media. The frequency equations in a closed form have been derived for SH-waves by applying suitable boundary conditions. The frequency equations have been expanded and approximated up to $2^{nd}$ order of Whittaker's function. It has been observed that the SH-wave velocity decreases as width of fiber-reinforced layer increases. However, with the increase of initial stress, gravity parameter and porosity, the phase velocity increases. The results obtained are in perfect agreement with the standard results investigated by other relevant researchers.

• 임산에너지
• /
• 제22권1호
• /
• pp.44-48
• /
• 2003

국산 간벌 소경재인 리기다소나무(Pinus rigida Mill.), 소나무(Pinus densifora Sieb. et Zucc), 일본잎갈나무(Larix kaemferi Carr) 및 상수리나무(Quercus acutissima Carr.)로 만든 무결점재에 대한 휨특성을 조사하였다. 휨강도와 탄성계수는 수종에 따라 차이가 있었다. 비중이 큰 상수리나무가 가장 큰 휨강도와 탄성계수를 나타냈으며, 비중이 작은 일본잎갈나무가 가장 작은 값을 나타냈다. 휨탄성계수와 휨강도는 응력파 탄성계수와 양호한 정의 상관관계를 나타내어 응력파 탄성계수에 의해 휨 특성 예측이 가능하였다.