• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.561-569
• /
• 2020

In this study, the dyeing of Chrysanthemum indicum Linne alone and the combined dyeing of Chrysanthemum indicum Linne and onion shell were first performed to compare dyeing properties. A combination extract of Chrysanthemum indicum Linne and onion shell can be expected to improve coloration. A Hanbok design for children used a natural dyeing fashion dyeing method to make the Chrysanthemum pattern. Chrysanthemum indicum Linne is a type of wild chrysanthemum with various medicinal effects for headache and stress relief, skin diseases, insomnia and depression. Widely used onion shells have medicinal properties that help prevent and treat various adult diseases. The colors of silk dyed exclusively by Chrysanthemum indicum Linne, and the colors of silk dyed by Chrysanthemum indicum Linne and onion shell extract are yellow; in addition, silk dyed by Chrysanthemum indicum Linne and onion shell extracts were almost all unchanged. Four hanboks, which are comfortable for children to wear and use, were produced using Chrysanthemum indicum Linne and onion shell extracts. If children wear hanbok fashion products with auspicious patterns, they can provide a chance to simultaneously experience the traditional symbolism of Korean patterns and culture. In addition, it is expected to develop pride in traditional dress culture.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.4
• /
• pp.161-172
• /
• 2020

The tensile property of A5082 and A6060 aluminium wrought alloys was investigated, in terms of the strain rate sensitivity on alloy conditions by heat treatment and bake hardenability on pre-strain prior to strain ageing. The tensile test was carried out in a range of strain rate of 4.17 × 10^-5 s^-1 ~ 4.17 × 10^-5 s^-1 in room temperature and the nominal range of pre-strain was 3.0 ~ 10.5%. The tensile deformation of A5082 alloys is characterized as typical case of dynamic strain ageing with negative strain rate sensitivity for all conditions, and the tensile strength indicates a similar level regardless of alloy conditions, except only in full annealed condition. The stress-relief annealing on A6060 alloys can induce practical decrease in strength level of over approximately 100 MPa without any ductility loss, compared to as-rolled condition, while a full annealed and aged condition leads remarkable strengthening effect with the decrease of tensile elongation. Additionally, the bake hardenability of A5082 alloy by strain ageing indicates a negative dependence upon the increase of pre-strain, while A6060 alloy exhibits a positive sign even in low level relatively compared with conventional SPCC.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.221-225
• /
• 2007

Recently, on account of stress relief and settlement of a healthy drinking culture, many people are visiting a song practice room. In case of such song practice room, since the mechanical voice through a loud accompaniment-music and microphone is on using, there has made a very loud noise, and it influences a lot to the adjacent other space and song practice room booth. Consequently, from the designing stage an efficient measures for soundproof and sound-insulation should be arranged. However, as most of the song practice room wall-bodies that already built up or under construction step were constructed merely with consideration on an interior-wise factor only, it is suffering at the soundproof and sound-insulation. Reflecting such viewpoint, this Study has measured Sound Transmission Loss on the subject for the song practice room wall-body recently built up, and based on the actually measured data, by practice of comparison?analysis on it using various evaluation methods, would intends to present a fundamental material for establishment an efficient sound-insulation measure.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.141-143
• /
• 2004

The experimental simulation welds using 3kinds of 70ksi titania based flux-cored consumables were performed on 24 inches 24.6-thick API 5L Gr. B pipe with relatively high current, over 300A and four different Post Weld Heat Treaonent(PWHT) conditions at $625^{circ}C$ were applied to each consumable test coupon. It is well known that, in common welding processes such as Submerged Arc Welding(SAW) or Flux Cored A.c Welding(FCAW), the cooling rates in as-deposited weld bead are normally so ,apid that actual precipitation of microalloy carbonitrides, Nb(C,N) or V(C,N) is not likely to occur in the as-welded weld metal, however, during stress relief or PWHT the operation of precipitation can reduce the impact properties of the weld metal. As results of mechanical testing, it is concluded that PWHT at $625^{circ}C$ is detrimental to weld metal impact toughness of Ti-B type flux- cored (FC) welding consumables regardless of the amount of Nb and V, but two optima were exhibited, one at 800ppm Ti, 75ppm 5 and another 360ppm Ti, 54ppm 5.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.405-418
• /
• 2018

This study identified several factors that may affect binge watching of drama series, which becomes more common, in the changing media environment and tested their influences empirically. For this objective, this research looked at how demographic variables, time availability, perceived effectiveness of interface, perceived content variability, neuroticism and motivations for drama binge watching affect binge watching of drama series. It also examined moderating effect of drama involvement. The findings showed that neuroticism, two motivations(playfulness/stress relief and program reputation motivation) have positive influences on binge watching of drama series. The moderating effect of drama involvement was also found. The meaning of results are also discussed.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.1
• /
• pp.66-74
• /
• 2017

This study was conducted to investigate the correlation between frequency of high-caffeine energy drink intake in adolescents and their mental health status using data from the Korean adolescent health behaviors online survey (2014-15). Mental health was classified by the five categories: Perception of stress (PS), Insufficient relief of fatigue after sleep (IRFS), Experience of sadness despair (SD), Suicidal ideation (SI), and Subjective unhappiness (SU). Regarding general characteristics, higher age, height, and body weight of subjects were associated with higher frequency of high-caffeine energy drink (HCED) intake (p< .0001). In the OR analysis, when the lowest group (${\leq}2/wk$) and highest group ($1{\geq}day$) were compared, the highest group showed significantly higher OR in all five categories of mental health. According to gender, males did not show better PS, SD, and SI than females who had a high frequency of HCED (p for trend<.0001). According to school level, middle school students showed a higher risk rate than high school students in PS, IRFS, and SD (p for trend< .0001). Based on the above results, higher frequency of HCED intake among adolescents was associated with more adverse effects on mental health.

• 연구논문집
• /
• s.34
• /
• pp.121-129
• /
• 2004

The influence of powder size and ball-milling time on the magnetic properties of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline alloy powder was investigated. Flake-shaped powders were produced by pulverizing the ribbons annealed at $550^\circC$ for 1 hour. The powders were classified and consolidated into core shapes at a pressure of 18ton/$cm^2$. The initial permeability at 100kHz of the inductor core produced using $53-75\mum$ powders showed the highest value although its consolidated density showed the lowest one. The reason for the result is due to the cracking of the particles larger than $75\mum$ during the consolidation process. The ball-milling of powders for 2-4 hours improved the consolidation density and the initial permeability of the cores. The intrinsic coercivity of the powder decreased as well, resulting from the stress relief of the powder by a short-time milling.

• Structural Engineering and Mechanics
• /
• v.20 no.5
• /
• pp.589-608
• /
• 2005

There is a growing need for the development and implementation of new methods for the rapid and cost-effective rehabilitation of deteriorating steel structural components to offset the drawbacks related to welding and/or bolting in the field. Carbon fiber reinforced polymer (CFRP) composites provide a potential alternative as externally bonded patches for strengthening and repair of metallic structural members for building and bridge systems. This paper describes results of an investigation of tensile and fatigue response of steel/CFRP joints simulating scenarios of strengthening and crack-patching. It is shown that appropriately designed schemes, even when fabricated with levels of inaccuracy as could be expected in the field, can provide significant strain relief and load transfer capability. A simplified elasto-plastic closed form solution for stress analysis is presented, and validated experimentally. It is shown that the bond development length remains constant in the linear range, whereas it increases as the adhesive is deformed plastically. Fatigue resistance is shown to be at least comparable with the requirements for welded cover plates without attendant decreases in stiffness and strength.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.357-362
• /
• 2011

Air springs are prevalently used as suspension in train. However, air springs are seldom used in automobiles where they improve stability and comfort by enhancing the impact-relief, breaking, and cornering performance. Thus, this study proposed a new method to analyze air springs and obtained some reliable design parameter which can be utilized in vehicle suspension system in contrast to conventional method. Among air spring types of suspension, this study focused on sleeve type of air spring as an analysis model since it has potential for ameliorating the quality of automobiles, specifically in its stability and comfort improvement by decreasing the shock through rubber sleeve. As a methodology, this study used MARC, as a nonlinear finite element analysis program, in order to find out maximum stress and maximum strain depending on reinforcement cord's angle variation in sleeves. The properties were found through uniaxial tension and pure shear test, and they were developed using Ogden Foam which is an input program of MARC. As a result, the internal maximum stresses and deformation according to the changes of cord angle are obtained. Also, the results showed that the Young's modulus becomes smaller, then maximum stresses decrease. It is believed that these studies can be contributed in automobile suspension system.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1099-1101
• /
• 1999

PJB(Prefabricated Joint Box) is consisted of three major components ; an epoxy unit, a stress relief cone and a spring unit. The insulation structure of PJB is maintained by the interfacial pressure, and the dielectric performance at the interface depends on the interfacial pressure which is regarded as the most important factor for preventing breakdown failure. This experiment was performed to investigate breakdown voltage characteristic and partial discharge patterns under the controlled pressure conditions at the simulated interface. Finally, this paper presents the optimal pressure conditions at the interface by analyasing the PD patterns.