• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.397-401
• /
• 2008

Knowledge of dynamic characteristics of structural elements often can make difference between success and failure in the design of structure due to resonance effect. In this paper an analytical model of a cantilever beam having midpoint load is considered for structural optimization. This involves creating the geometry which allows parametric study of all design variables. For that purpose optimization of cantilever beam is elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight using ANSYS. But such geometry could be obtained by different combinations of width and height, so that it may have the same cross sectional area yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration different dynamic analyses are performed simultaneously to solve the eigenvalues problem assuming no damping initially through MATLAB simulations using state space form for modal analysis, which identifies the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. And next by introducing damping effects tip displacement, bending stress and the vertical reaction force at the fixed end is evaluated under some dynamic load of varying frequency, and finally it is discussed how resonance can be avoided for particular design. Investigation of results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design. Potentially this technique will meet maintenance and cost goals of many organizations particularly for the application where dynamic loading is invertible and helps a lot ensuring that the proposed design will be safe for both static and dynamic conditions.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3955-3961
• /
• 2013

Background: Defects of manganese superoxide dismutase (MnSOD) have long been implicated in generation of oxidative stress and risk susceptibility to various cancers. Two functional polymorphisms within the MnSOD gene, including the Val-9Ala of the mitochondrial targeting sequence (MTS) and the Ile58Thr of the exon-3, have been proposed to reduce its enzyme activity and antioxidant potential. Materials and Methods: A high-throughput multiplex SNaPshot$^{(R)}$ system was developed herein for simultaneous analyses of Val-9Ala and Ile58Thr in a single reaction. Genomic DNA extracted from each whole blood sample of 248 patients including 107 with cervical cancer and 141 with breast cancer and from 136 healthy women as controls was analyzed by the multiplex SNaPshot$^{(R)}$ system. Results: The Val/Val, Val/Ala genotypes and the Val allele of the MTS were predominant in patients with cervical or breast cancer as well as healthy women in Thailand. The Ile/Ile genotype and the Ile allele of the exon-3 were found in all of them whereas none of the Ile/Thr, the Thr/Thr genotypes and the Thr allele was detected. Genotypic association of both Val-9Ala and Ile58Thr polymorphisms with cervical cancer and breast cancer of these patients comparing to healthy women was not statistically significant (p<0.05). Conclusions: The Val/Val, Val/Ala genotypes and the Val allele of the MTS were found predominantly but the Ile/Ile genotype and the Ile allele of the exon-3 were detected in patients with cervical cancer, breast cancer and healthy women in Thailand. These two functional polymorphisms (Val-9Ala and Ile58Thr) in MnSOD gene did not associate with susceptibility risk of these cancer patients in Thailand.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.1
• /
• pp.81-88
• /
• 2020

Regulator of calcineurin 1 (RCAN1) can be induced by an intracellular calcium increase and oxidative stress, which are characteristic features of temporal lobe epilepsy. Thus, we investigated the spatiotemporal expression and cellular localization of RCAN1 protein and mRNA in the mouse hippocampus after pilocarpine-induced status epilepticus (SE). Male C57BL/6 mice were given pilocarpine hydrochloride (280 mg/kg, i.p.) and allowed to develop 2 h of SE. Then the animals were given diazepam (10 mg/kg, i.p.) to stop the seizures and sacrificed at 1, 3, 7, 14, or 28 day after SE. Cresyl violet staining showed that pilocarpine-induced SE resulted in cell death in the CA1 and CA3 subfields of the hippocampus from 3 day after SE. RCAN1 immunoreactivity showed that RCAN1 was mainly expressed in neurons in the shammanipulated hippocampi. At 1 day after SE, RCAN1 expression became detected in hippocampal neuropils. However, RCAN1 signals were markedly enhanced in cells with stellate morphology at 3 and 7 day after SE, which were confirmed to be reactive astrocytes, but not microglia by double immunofluorescence. In addition, realtime reverse transcriptase-polymerase chain reaction showed a significant upregulation of RCAN1 isoform 4 (RCAN1-4) mRNA in the SE-induced hippocampi. Finally, in situ hybridization with immunohistochemistry revealed astrocytic expression of RCAN1-4 after SE. These results demonstrate astrocytic upregulation of RCAN1 and RCAN1-4 in the mouse hippocampus in the acute and subacute phases of epileptogenesis, providing foundational information for the potential role of RCAN1 in reactive astrocytes during epileptogenesis.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.184-190
• /
• 2017

Matrix metalloproteinases (MMPs) are endopeptidases that take significant roles in extracellular matrix degradation and therefore linked to several complications such as metastasis of cancer progression, oxidative stress, and hepatic fibrosis. Hizikia fusiformis, a brown algae, was reported to possess bioactivities, including but not limited to, antiviral, antimicrobial, and anti-inflammatory partly due to bioactive polysaccharide contents. In this study, the potential of H. fusiformis against cancer cell invasion was evaluated through the MMP inhibitory effect in HT1080 fibrosarcoma cells in vitro. H. fusiformis crude extract was fractionated with organic solvents, $H_2O$, n-BuOH, 85% aqueous MeOH, and n-hexane (n-Hex). The non-toxicity of the fractions was confirmed by MTT assay. All fractions inhibited the enzymatic activities of MMP-2 and MMP-9 according to the gelatin zymography assay. Cell migration was also significantly inhibited by the n-Hex fraction. In addition, both gene and protein expressions of MMP-2 and -9, and tissue inhibitor of MMPs (TIMPs) were evaluated by reverse transcription-polymerase chain reaction and Western blotting, respectively. The fractions suppressed the mRNA and protein levels of MMP-2, MMP-9 while elevating the TIMP-1 and TIMP-2, with the $H_2O$ fraction being the least effective while n-Hex fraction the most. Collectively, the n-Hex fraction from brown algae H. fusiformis could be a potential inhibitor of MMPs, suggesting the presence of various derivatives of polysaccharides in high amounts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.193.2-193.2
• /
• 2016

We evaluate the change in defects in the oxidized SiO2 grown on 4H-SiC (0001) by plasma assisted oxidation, by comparing with that of conventional thermal oxide. In order to investigate the changes in the electronic structure and electrical characteristics of the interfacial reaction between the thin SiO2 and SiC, x-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), DFT calculation and electrical measurements were carried out. We observed that the direct plasma oxide grown at the room temperature and rapid processing time (300 s) has enhanced electrical characteristics (frequency dispersion, hysteresis and interface trap density) than conventional thermal oxide and suppressed interfacial defect state. The decrease in defect state in conduction band edge and stress-induced leakage current (SILC) clearly indicate that plasma oxidation process improves SiO2 quality due to the reduced transition layer and energetically most stable interfacial state between SiO2/SiC controlled by the interstitial C.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.690-695
• /
• 1999

An experimental study for mesophase pitch prepared from coal tar pitch has been carried out to clarify the rheological behaviors in the molten state. The apparent viscosity, shear stress, shear rate, Qunoline insoluble(QI), and softening point(SP) change were investigated especially. The conditions to increase mesophase content during polymerization were heat treatment time of 5 hrs, catalyst concentration of 3% and reaction temperature of $420^{\circ}C$. Apparent viscosity change with increase in temperature of pitches was different according to the heat treatment conditions and apparent viscosity increased with increasing heat treatment temperature, heat treatment time, contents of mesophase, on the contrary, fluidity is decreased. Rheological behavior of molten mesophase pitches at about $270^{\circ}C$ showed Newtonian behavior below $375^{\circ}C$ and non-Newtonian behavior above $270^{\circ}C$, the flow behavior was analyzed with Casson model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8637-8642
• /
• 2015

Typical aging for the rubber using the current military adhesive combat boots was spread with a regular aging caused by heat stress. In this study, the aging test of the rubber for combat boots was carried out and the reaction rate constant, k was calculated at aging temperature $60^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$, using the Arrhenius equation. The lifetime limit was assumed that the tensile strength of the product is reduced to 30%, the elongation is reduced to 50% and abrasion resistance ratio is 380%. ln($P/P_0$) and the lifetime was predicted with the consideration of the activation energy constant. According to the above, the lifetime of the rubber for combat boots with influenced by aging temperature was predicted. As the result, the estimate lifetime at $20^{\circ}C$ was confirmed more than 10 years.

• Sleep Medicine and Psychophysiology
• /
• v.24 no.1
• /
• pp.19-23
• /
• 2017

Obstructive sleep apnea is a common disorder in which respiratory flow decreases or disappears despite respiratory effort due to occlusion of the upper respiratory tract during sleep. Oxidative stress and systemic inflammatory reaction induced by the obstruction cause complications such as hypertension, coronary artery disease, and diabetes and increase cancer incidence. Furthermore, in patients with interstitial lung disease, obstructive sleep apnea has a very high prevalence and is thought to have a close pathophysiological and clinical correlation. In other words, obstructive sleep apnea could be the cause or a complication of interstitial lung disease ; when these two afflictions coexist, the prognosis of the patient is worse. In patients with interstitial lung disease with obstructive sleep apnea, CPAP treatment significantly improved sleep and quality of life, as well as improved morbidity and mortality in a recent study. Therefore, early diagnosis and treatment of obstructive sleep apnea in patients with interstitial lung disease are very important, and additional studies designed to include patients with idiopathic pulmonary fibrosis as well as patients with advanced interstitial lung disease should be performed.

• Journal of Pharmacopuncture
• /
• v.14 no.2
• /
• pp.81-91
• /
• 2011

Objectives & Methods: This suggestion was attempted to be elevated the recognition of common characteristics in disease. So, we performed to analyze the correlation of common cause of disease, characteristics of human body, and medical treatment. And the results are as follows. Results: 1. The cause of disease is consist of genetic factor, aging, habit, food of not good in health, weather, environment, deficit of the physical activity, stress and so on. 2. Generally, human has common and individual weakness. Individual weakness is appeared similar to the occurrence of volcano and lapse. 3. The correlation of disease and medical treatments is possible to explain using the quotation of the law of motion made by Isaac Newton, the great physicist. 4. When the process of the medical treatment was not progressed, the prognosis is determined by the correlation of the homeostasis(H') in human body and the homeostasis(H) of disease. 5. The prognosis of disease is determined by the relationship between the energy of disease(F) and medical treatment(F'). 6. The exact diagnosis is possible to predict the treatment sequence, and the facts that homeostasis in human body and disease, relationship between the energy of disease(F) and medical treatment(F'), action and reaction are important to determine the prognosis. 7. The careful observation of improving response and worsening action of disease becomes available for exact prognosis. Conclusion: The above described contents may be useful in clinical studies, and the concrete clinical reports about this will be made afterward.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.