• 제목/요약/키워드: Stress intensity

검색결과 1,999건 처리시간 0.031초

스마트워크와 심리적 비분리가 연결되지 않을 권리 인식에 미치는 영향 : 의사소통 개방성과 성별의 조절효과를 중심으로 (The Effect of Smart Working and Psychological Attachment from Work on Right to Disconnect : Focused on Moderating Effect of Open Communication and Gender)

  • 박정렬;권순동
    • Journal of Information Technology Applications and Management
    • /
    • 제26권1호
    • /
    • pp.77-93
    • /
    • 2019
  • Recently, office workers are increasingly aware of the right to disconnect because of the pressure from strong connections with Internet messengers. In this study, we examined the reason why the perception of the right to disconnect increases and how to deal with it. This research model is that smart working and psychological attachment from work affect right to disconnect, and that open communication and gender moderate the intensity of these effects. To verify this research model, survey questionnaires were distributed to workers in smart working environments, and 400 data were collected and analyzed using Smart-PLS. As results of data analysis, it was verified that smart working and psychological attachment from work had a significant influence on right to disconnect, that open communication group had a lesser effect of psychological attachment from work on right to disconnect than closed communication group, and that women had a lesser effect of psychological attachment from work on right to disconnect than men. Organizations need to maintain a desirable level of right to disconnect in order to improve the quality of working life. But, if it is impossible, They need to change the way of communication more openly so as to absorb the burden of strong connection by Internet. And they need to perform task assignment or stress relief policy reflecting gender characteristics.

Torsional wave dispersion in a bi-layered hollow cylinder with inhomogeneous initial stresses caused by internal and external radial pressures

  • Akbarov, Surkay D.;Bagirov, Emin T.
    • Structural Engineering and Mechanics
    • /
    • 제77권5호
    • /
    • pp.571-586
    • /
    • 2021
  • The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.

후물재 용접부의 용착금속과 열영향부의 파괴 인성 비교 연구 (Fracture Toughness Comparison of Weld Metal and Heat-Affected Zone of Brittle Crack Arrest Steel Welding Joint)

  • 최경신;공석환;설상석;정원지
    • 한국기계가공학회지
    • /
    • 제20권7호
    • /
    • pp.8-14
    • /
    • 2021
  • Even welds that have passed non-destructive testing in the case of brittle crack arrest steel materials will actually have very fine weld defects. Based on studies showing that these defects adversely affect the structure if subjected to a certain period of load, the following conclusions were obtained by conducting CTOD tests on welding joints of high-strength BCA materials, structures comprising the upper decks of a large container vessel. First of all, the fatigue pre-cracking in the weld metal and heat affected areas was tested and the behavior was identified. Both parts of the welding joint are allowable range for the class regulations. In addition, CTOD results showed that the CTOD value in the heat affected area was more than 0.5 times higher than in the weld metal area.

지역사회 중노년기 성인의 연령군별 낙상두려움 관련 요인 (Factors Related to Fear of Falling by Age Group in Community-dwelling Mid to Late-adults)

  • 이은주;이은숙
    • 동서간호학연구지
    • /
    • 제28권2호
    • /
    • pp.122-131
    • /
    • 2022
  • Purpose: This study aimed to identify the factors related to fear of falling (FOF) in different age groups from community-dwelling mid to late-adults. Methods: To identify the factors related to FOF, data of 162,684 adults over 45 years of age from 2019 Community Health Survey was analyzed using logistic regression with complex samples. Results: Factors related to FOF found in all age groups were sex, previous experience of falls, physical activity levels over moderate intensity, subjective health status, number of chronic diseases, stress, depression, and cognitive decline. In the 45-64 age group, the FOF was significantly higher in the groups of low education level and low monthly household income. In the 65-74 and over 75 age groups, the FOF was significantly higher in the groups of not living with spouse and walking not practiced. Conclusion: We suggests that understanding of risk factors and early detection of fall risk patients in each age group are necessary to establish and apply tailored fall prevention programs for prevention and management of the FOF in community-dwelling mid to late-adults.

Constraint-corrected fracture mechanics analysis of nozzle crotch corners in pressurized water reactors

  • Kim, Jong-Sung;Seo, Jun-Min;Kang, Ju-Yeon;Jang, Youn-Young;Lee, Yun-Joo;Kim, Kyu-Wan
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1726-1746
    • /
    • 2022
  • This paper presents fracture mechanics analysis results for various cracks located at pressurized water reactor pressure vessel nozzle crotch corners taking into consideration constraint effect. Technical documents such as the ASME B&PV Code, Sec.XI were reviewed and then a fracture mechanics analysis procedure was proposed for structural integrity assessment of various nozzle crotch corner cracks under normal operation conditions considering the constraint effect. Linear elastic fracture mechanics analysis was performed by conducting finite element analysis with the proposed analysis procedure. Based on the evaluation results, elastic-plastic fracture mechanics analysis taking into account the constraint effect was performed only for the axial surface crack of the reactor pressure vessel outlet nozzle with cladding. The fracture mechanics analysis result shows that only the axial surface crack in the reactor pressure vessel outlet nozzle has the stress intensity factor exceeding the low bound of upper-shelf fracture toughness irrespectively of considering the constraint effect. It is confirmed that the J-integral for the axial crack of the outlet nozzle does not exceed the ductile crack initiation toughness. Hence, it can be ensured that the structural integrity of all the cracks is maintained during the normal operation.

AZ61 마그네슘 압출재의 압출 온도에 따른 기계적 특성 및 고주기 피로 특성 (Effect of Extrusion Temperature on Mechanical Properties and High-cycle Fatigue Properties of Extruded AZ61 Alloy)

  • 김예진;차재원;김영민;박성혁
    • 소성∙가공
    • /
    • 제31권3호
    • /
    • pp.117-123
    • /
    • 2022
  • In this study, a commercial AZ61 magnesium alloy is extruded at 300 ℃ and 400 ℃ and the microstructures, mechanical properties, and high-cycle fatigue properties of the extruded materials are investigated. Both extruded materials have a fully recrystallized microstructure with no Mg17Al12 precipitates. The average grain size and maximum basal texture intensity of the extruded material increase with increasing extrusion temperature. The material extruded at 400 ℃ (AZ61-400) has higher tensile yield strength and lower compressive yield strength than the material extruded at 300 ℃ (AZ61-300) because of the stronger basal texture of the former. Because of coarser grain size, the tensile elongation of AZ61-400 is lower than that of AZ61-300. Despite the differences in microstructures and tensile/compressive properties, the two extruded materials have the same fatigue strength of 110 MPa. This is because the finer grain size of AZ61-300 causes an increase in fatigue strength, but its weaker texture causes a decrease in fatigue strength. In both extruded materials, fatigue cracks initiate at the surface of fatigue specimens at all stress amplitudes tested.

Acid sphingomyelinase inhibition alleviates muscle damage in gastrocnemius after acute strenuous exercise

  • Lee, Young-Ik;Leem, Yea-Hyun
    • 운동영양학회지
    • /
    • 제23권2호
    • /
    • pp.1-6
    • /
    • 2019
  • [Purpose] Strenuous exercise often induces skeletal muscle damage, which results in impaired performance. Sphingolipid metabolism contributes to various cellular processes, including apoptosis, stress response, and inflammation. However, the relationship between exercise-induced muscle damage and ceramide (a key component of sphingolipid metabolism), is rarely studied. The present study aimed to explore the regulatory role of sphingolipid metabolism in exercise-induced muscle damage. [Methods] Mice were subjected to strenuous exercise by treadmill running with gradual increase in intensity. The blood and gastrocnemius muscles (white and red portion) were collected immediately after and 24 h post exercise. For 3 days, imipramine was intraperitoneally injected 1 h prior to treadmill running. [Results] Interleukin 6 (IL-6) and serum creatine kinase (CK) levels were enhanced immediately after and 24 h post exercise (relative to those of resting), respectively. Acidic sphingomyelinase (A-SMase) protein expression in gastrocnemius muscles was significantly augmented by exercise, unlike, serine palmitoyltransferase-1 (SPT-1) and neutral sphingomyelinase (N-SMase) expressions. Furthermore, imipramine (a selective A-SMase inhibitor) treatment reduced the exercise-induced CK and IL-6 elevations, along with a decrease in cleaved caspase-3 (Cas-3) of gastrocnemius muscles. [Conclusion] We found the crucial role of A-SMase in exercise-induced muscle damage.

An interpretable machine learning approach for forecasting personal heat strain considering the cumulative effect of heat exposure

  • Seo, Seungwon;Choi, Yujin;Koo, Choongwan
    • 한국건설관리학회논문집
    • /
    • 제24권6호
    • /
    • pp.81-90
    • /
    • 2023
  • Climate change has resulted in increased frequency and intensity of heat waves, which poses a significant threat to the health and safety of construction workers, particularly those engaged in labor-intensive and heat-stress vulnerable working environments. To address this challenge, this study aimed to propose an interpretable machine learning approach for forecasting personal heat strain by considering the cumulative effect of heat exposure as a situational variable, which has not been taken into account in the existing approach. As a result, the proposed model, which incorporated the cumulative working time along with environmental and personal variables, was found to have superior forecast performance and explanatory power. Specifically, the proposed Multi-Layer Perceptron (MLP) model achieved a Mean Absolute Error (MAE) of 0.034 (℃) and an R-squared of 99.3% (0.933). Feature importance analysis revealed that the cumulative working time, as a situational variable, had the most significant impact on personal heat strain. These findings highlight the importance of systematic management of personal heat strain at construction sites by comprehensively considering the cumulative working time as a situational variable as well as environmental and personal variables. This study provided a valuable contribution to the construction industry by offering a reliable and accurate heat strain forecasting model, enhancing the health and safety of construction workers.

Free Radical Scavenging and Antioxidant Activities of Water Extracts from Amannia multiflora, Amannia coccinea, Salix gracilistyla Inhabiting Along the Nakdong River (Republic of Korea)

  • Jayasingha Arachchige Chathuranga Chanaka Jayasingha;Mi-Hwa Lee;Chang-Hee Kang;Yung Hyun Choi;Gi-Young Kim
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2022년도 추계학술대회
    • /
    • pp.31-31
    • /
    • 2022
  • Plant-derived antioxidants are used as a healthy diet and are known to inhibit various human diseases. In this study, we investigated free radical scavenging and antioxidant activity of extracts from three plants (Ammannia multiflora, Ammannia coccinea and Salix gracilistyla) with the most DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity from 196 plant extracts inhabiting along Nakdong River in Republic of Korea. The three extracts also have strong total antioxidant activity. Moreover, the extracts inhibited hydrogen peroxide (H2O2)-induced reactive oxygen species production and depolarized mitochondrial membrane potential in RAW264.7 macrophages. In zebrafish larvae, 2',7'-dichlorodihydrofluorescein diacetate (DCFDA) fluorescent intensity, induced by H2O2, was markedly reduced by the extracts of A. multiflora, A. coccinea and S. gracilistyla. Meanwhile, the extracts were upregulated Nrf2 and HO-1 expression, and an HO-1 inhibitor reversed the extract-induced oxidative responses both in vivo and in vitro. The data suggest that the extracts of A. multiflora, A. coccinea, and S. gracilistyla exert potential free radical scavenging and antioxidant capacities both in vivo and in vitro by activating the Nrf2/HO-1 signaling pathway.

  • PDF

한국 이갈이 환자의 성격 유형 검사(MBTI) (Personality Type Test(MBTI) of the Korean Bruxism Patients)

  • 이현애;어규식;정기택;전양현;홍정표
    • Journal of Oral Medicine and Pain
    • /
    • 제33권1호
    • /
    • pp.41-48
    • /
    • 2008
  • 본 연구의 목적은 스트레스와 관련된 이갈이 환자의 성격요인을 MBTI를 이용하여 분석하고, 어떤 성격 유형이 이갈이 환자에게 많이 발생하는 지를 밝힘으로써 그 성격별 특징을 이해하고, 향후 환자에게 균형 잡힌 선호를 갖도록 방안을 제시하고 조언을 해줌으로써 심인성 환자의 치료 효율을 높임과 동시에, 기존과는 차별화된 다양한 생존 전략을 고심해야 할 시점에 이갈이 원인 중 성격 요인이 크다는 것을 밝혀 타 병원과의 차별성 획득 방안을 마련하고자 하는 것이다. 실증 분석 결과를 종합해보면 다음과 같다. 첫째, 이갈이 환자에서는 I 비율이 높게 나왔다. 이는 주의집중과 에너지 방향을 자기 내부에 집중을 하며, 사생활이 보호되는 것을 좋아하는 내향성이 스트레스 발산에 둔감할 수 있으므로 이갈이를 한다고 생각할 수 있다. 둘째, 이갈이 환자에서는 T비율이 높게 나왔다. 이는 의사결정 시에 원리, 논리, 원칙에 따르고, 분석적인 사고형이 심인성 스트레스가 크다고 생각된다. 셋째, 이갈이 환자의 ST분포가 월등히 높았다. 이는 일의 생산성과 효과, 효율성을 추구하는 보수적인 성향이 있는 유형이 이갈이를 잘 한다는 것을 의미하고, 이로 인한 긴장과 스트레스도 많으리라고 생각된다. 넷째, 이갈이 환자에서는 IJ지표가 높았다. 이는 변화하기 어렵고 준비에 철저한 성격인 결정 지향적 내향형이 이갈이를 많이 하게 된다는 결론을 가질 수 있다. 다섯째, 이갈이 환자에서 IT지표가 높았다. 내향적 사고형이 쉽게 상처받는 그들의 성격 특성상 스트레스의 강도가 크리라 생각된다. 마지막으로, 이갈이 환자에서는 IS지표가 높았다. 이는 조용하고 수동적이나 다른 사람의 감정에 대해 방어적인 내향적 감각형이 이갈이를 많이 하는 것을 의미한다. 이 결과에서 나타나듯이 이갈이 환자군은 분명한 성격유형 특징이 있다. 분석적이고 내향적인 유형이 많은 이갈이 집단이 대조군에 비해 스트레스의 인지 정도가 더 높으리라 사료된다.