• Journal of the Korea Concrete Institute
• /
• v.21 no.2
• /
• pp.139-146
• /
• 2009

Experimental study was performed to evaluate the long-term behavior of CFRP (carbon fiber reinforced polymer) strips under sustained loads including prestressing force in strengthening RC members with post-tensioned CFRP strips. Two types of CFRP strip such as unidirectional CFRP strip and hybrid CFRP strip which is composed of carbon fiber and steel plate were considered. Also two types of loading scheme were included in this study. Direct sustained loading test had been carried out to estimate the creep deformation and relaxation of CFRP strips including slip deformation at both mechanical anchorages for over 700 days. Also, flexural sustained loading test had been conducted to estimate the initial prestress losses on clamping the CFRP strips at jacking anchorages for over 90 days. From the sustained loading tests, it was observed that stress losses of unidirectional CFRP strips due to the creep deformation and relaxation of material itself and slip deformation at mechanical anchorage were ignorable. On the other hand, significant stress losses caused by the yielding of steel embedded in CFRP strips were found in case of hybrid CFRP strips due to the initial jacking force over steel yielding stress. Also, initial prestress losses during setting of CFRP strips on mechanical anchorage were about 10% of intial jacking force, which must be considered in the design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.219-225
• /
• 2019

Computing low temperature performance of asphalt mixture is one of the important tasks especially for cold regions. It is well known that experimental creep testing work is needed for computation of thermal stress and critical cracking temperature of given asphalt mixture. Thermal stress is conventionally computed through two steps of computation. First, the relaxation modulus is generated thorough the inter-conversion of the experimental creep stiffness data through the application of Hopkins and Hamming's algorithm. Secondly, thermal stress is numerically estimated solving the convolution integral. In this paper, one-step thermal stress computation methodology based on the Laplace transformation is introduced. After the extensive experimental works and comparisons of two different computation approaches, it is found that Laplace transformation application provides reliable computation results compared to the conventional approach: using two step computation with Hopkins and Hamming's algorithm.

• Korean Journal of Health Education and Promotion
• /
• v.3 no.1
• /
• pp.43-55
• /
• 1985

The recent problems of adolescents are leading us to amphasize school mental health program. Therefore, for the first step of that program, this study was attempted to find out the students' daily life stress, their adaptation beharior to resolve that stress, and their self-concept which has an effect on that beharior, to analyze the relationship among those three variables, and to provide basic data which help maintain and promote students' adaptability and mental health. The subjects were 4 classes each grade, 743 students who were chosen as a sample subject among the total of 3,250 students of a junior girls' school in Seoul by stratified sampling method. The Oquestionnair surrey was done from April 1, 1985 to April 6, 1985. The instruments were (1) a part of Junghoon chois' perceptual Orientation Scale for measuring self-perception of students, (2) Rosenberg's Questionnair for measuring students' evaluation of self-esteem, (3) modified Bell's Adoptive Behavior Questionnair, and (4) the Measuring scale for stress developed by the investigator. The collected data were analyzed by using descriptive statistics, x²-test, t-test, ANOVA, and Pearsons' Correlation. The results are summarized as follows: 1. The range of mean score of self-concept, stress, and adaptation beharior is 1-5 respectively. The mean score of self concept was 3.45. The mean score of stress was 2.53, and the degree of stress was in order of the problem of study and grade marks, girl friend, appearance, and relaxation. The subjects preferred effective long-term adaptation method (Mean=2.81) to ineffective short-term adaptation method. (Mean=2.47) 2. The self-concept had the highest degree when students were 1st grade, in good health condition, taking high grade marks, both parents existing, fathers' educational level being above college, and being in high economic status. The degree of stress was significantly high when students were 3rd grade, in poor health condition, having low grade marks, being in poor economic status, and fathers' educational level being under elimentary school. In relation with adaptation method, 1st grade students used more sbort-term and long-term method, and when students had high grade marks, being in high economic status. they used more long-term adaptation behavior. 3. Two Hypotheses of this research were tested: Hypothesis 1. "The higher the students' self-concept is, the more they use long-term adaptation method." was accepted. (r=.2482, p<.01) (t=-4.99, p<.001) Hypothesis 2. "The higher the students' stress is, the more they use short-term adaptation method." was accepted. (r=.2897, p<.01) (t= -7.51, p<.001) In conclusion, a person in charge of school health can help students to adapt effectively by planning and implementing methods which highten their self-concept and lower their stress. But because the correlation among self-concept, stress and adaptation behavior was at a low level, I think that the study, which confirm the relationship of those three variables, is needed.

• Journal of Korean Academy of Nursing
• /
• v.30 no.6
• /
• pp.1389-1399
• /
• 2000

Massage therapy is a traditional, alternative and nonphamacological means of promoting rest and relaxation. However, nursing intervention by massage for middle-aged women is rarely practiced by nurses. The purpose of this research was to examine the effects of the hand and arm massage as an independent nursing intervention tool for middle- aged women. The data used in this research were collected from forty-nine subjects using a nonequivalent control group non- synchronized design. Twenty-four persons for the experimental group and Twenty-five persons for the control group were selected from D city and C city from July 1997 to September 2000. Subjects' ages were between forty and fifty-six years old with mean the age of 45.6. Hand and arm massage developed by Cayce and Reilly was applied to the experimental group for a session of 15 minutes two or three times a week for four weeks. The instruments used for the measurement of the subjects' stress, anxiety, depression and the middle-life crisis were Langners's 22-item Self-rating Depression Scale, and Kim's Middle Life Crisis Scale(1988). These psychological factors were measured before and after the implementation of hand and arm massage. The data were analyzed with mean$\pm$s.d, percent, t-test, and a paired t-test. The results were summarized as follows; 1. Before the treatment, there were no significant differences between the two groups. 2. After the treatment, there were significant differences in the stress and the occurrence of mid life crisis between the two groups. The findings suggest that the use of the life crisis. Therefore, it is recommended that hand and arm massage be used as an independent nursing intervention tool for middle-aged women. For further research, is needed replication of this concept of research with different subjects in a larger population. Also, it is recommended to investigate the effects of massage with aroma therapy for the berefit of decreasing womens' stress level further.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.529-539
• /
• 1996

Fracture resistance(J-R) curves, which are used for elastic-plastic fracture mechanics analyses, are known to be dependent on the specimen geometry. The objective of this paper is to investigate the effect of crack tip constraint an the J-R curves in CT specimens. Fracture toughness tests on CT specimens with varying planform size were performed and test results showed that the J-R curves were increased with an increase in the planform size. Finite element analysis were also performed and the numerical results showed that this experimental phenomenon was probably due to the relaxation of crack tip constraint resulting from the stress triaxiality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.70-73
• /
• 2009

The aim of this research is to obtain a numerical material model for an amorphous glassy polymer, polycarbonate (PC), which can be used in finite element analysis (FEA) of the micro thermal imprint process near the glass transition temperature. An understanding of the deformation behavior of the PC specimens was acquired by performing tensile stress relaxation tests. The viscoelastic material model based on generalized Maxwell model was introduced for the material near Tg to establish the FE model based on the commercial FEA code ABAQUS/Standard with a suitable set of parameters obtained for this material model from the test data. Further validation of the model and parameters was performed by comparing the analysis of FE model results to the experimental data.

• Journal of the Society of Disaster Information
• /
• v.7 no.3
• /
• pp.206-219
• /
• 2011

The important elements in pavement design criteria are the stress and strain distributions. To obtain reasonable stress and strain distribution, tire contact area and tire pressures are very important. This study presents a viscoelastic characterization of flexible pavement subjected to moving loads. During the test, both longitudinal and lateral strains were measured at the bottom of asphalt layers and in-situ measurements were compared with the results of numerical analysis. A 3-dimension finite element model was used to simulate each test section and a step loading approximation has been adopted to analyze the effect of a moving vehicle on pavement behaviors. For viscoelastic analysis, relaxation moduli, E(t), of asphalt mixtures were obtained from laboratory test. Field responses reveal the strain anisotropy (i.e., discrepancy between longitudinal and lateral strains), and the amplitude of strain normally decreases as the vehicle speed increases. In most cases, lateral strain was smaller than longitudinal strain, and strain reduction was more significant in lateral direction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.8-14
• /
• 2021

Post-tensioned prestressed concrete members experience immediate prestress losses as well as time-dependent prestress losses such as creep, dry shrinkage and relaxation. In addition, the stress of the upper and lower parts of the member changes due to the change in dead load due to the replacement of the upper slab and/or pavement. Such changes in fiber stress may affect the safety of the member, and it is necessary to adjust the prestressing force. Therefore, in this study, a screw type of re-tensioning post-tension kit is proposed, and it is verified that the safety against load and the stability against strain are satisfied through the load transfer test specified in EAD160004 and KCI-PS101.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1494-1501
• /
• 2006

Mechanical and physical properties of a copper alloy for a liquid rocket engine(LRE) combustion chamber liner application were tested at various temperatures. All test specimens were heat treated with the condition they might experience during actual fabrication process of the LRE combustion chamber. Physical properties measured include thermal conductivity, specific heat and thermal expansion data. Uniaxial tension tests were preformed to get mechanical properties at several temperatures ranging from room temperature to 600$^{\circ}C$. The result demonstrated that yield stress and ultimate tensile stress of the copper alloy decreases considerably and strain hardening increases as the result of the heat treatment. Since the LRE combustion chamber operates at higher temperature over 400$^{\circ}C$, the copper alloy can exhibit time-dependent behavior. Strain rate, creep and stress relaxation tests were performed to check the time-dependent behavior of the copper alloy. Strain rate tests revealed that strain rate effect is negligible up to 400$^{\circ}C$ while stress-strain curve is changed at 500$^{\circ}C$ as the strain rate is changed. Creep tests were conducted at 250$^{\circ}C$ and 500$^{\circ}C$ and the secondary creep rate was found to be very small at both temperatures implying that creep effect is negligible for the combustion chamber liner because its operating time is quite short.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.3 s.40
• /
• pp.319-327
• /
• 1999

This study makes mechanism of the fatigue strength improvement by the processing of weld toe clear for the vertical cross rib specimens which was made fillet weld joint, also it proposes to the appropriate later processing. As a result of tension fatigue test, the fatigue strength improvement could have been seen in later processed specimens than as-weld specimens. Especially fatigue crack initial life $N_c$ increased in specimens which processed grinder after hammer-peening. Also, fatigue crack propagation life $N_p$ improved more in hammer-peening specimens than as-weld or TIG specimens. It thinks that $N_c$ is because of the geometrical shape of weld toe, i.e. the relaxation of the stress concentration and also that $N_p$ is because the big compression residual stress which was introduced in the surface by hammer-peening is restraining the propagation of fatigue crack.