• 사상체질의학회지
• /
• 제24권3호
• /
• pp.69-79
• /
• 2012

Objectives This study was performed to research the biological change after walking program in forest according to Sasang constitution. Methods Twenty four applicants are involved in this study. They were classified into three groups(Soyangin, Taeeumin, Soeumin) by QSCC II and divided into two groups(roadway, forest path) by place. And then they participated in walking program on March 31 in 2012. We performed before and after measurements, including active oxygen, biochemical test(BC), and stress hormones. Results Cortisol decreased in the entire group after walking program, which means the effect of relaxation. Glucose reduced in Soyangin group while increased in Taeeumin and Soeumin group after the program. There was no correlation in the test results between Sasang constitution and walking place. Conclusions Walking program has shown most efficacy in relaxation. However a single positive result within this study should be carefully interpreted. In the future, well-designed studies for Sasang constitutional walking program are needed.

• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.27-34
• /
• 1988

The objective of this paper is to investigate the effect of residual stress on fatigue crack growth behavior. For this purpose, submerged arc welding was performed on SM50A steel plate and post weld heta treatment (PWHT) was followed. Residual stress distribution on the weld plate was determined by a hole drilling method and a series of .DELTA.P-const. and .DELTA.K-decreasing fatigue test were performed on the three different regions, i.e. weld metal, HAZ and base metla. Following conclusins were achieved. 1. In "as welded" specimens, tensile residual stresses were produced in the center portion of the specimen while compressive residual stresses were produced near the edges. In PWHT specimens, however, most of the residual stresses were disappeared. 2. The fatigue crack growth behavior in low .DELTA.K region was considerably affected by the presence of residual stress in both "as welded" and PWHT specimens. 3. Because of the relaxation of residual stresses in PWHT condition, the values of m increased from 2.62-2.78 (in the "as welded" condition) to 3.57-3.91 (in the "PWHT" condition)3.91 (in the "PWHT" condition)condition)

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1965-1971
• /
• 1997

The relaxation of stress concentration in notched members can be very significant in the improvement of notched strength and fatigue life. This paper investigated the relationship of stress concentration factor, and notched strength and fatigue life. The stress concentration factors were analyzed by FEM. Uniaxial tensile and fatigue tests were carried on plain woven composite specimens which have a main hole and two defence holes. From experimental results, the notched strength and the fatigue limit increased up to about 50% and 30% respectively due to the reduction in stress concentration. The fatigue lives predicted by Juvinall's approach were underestimated than test results and this trends were remarkable as nothed strength increased. This is because of the underestimation of a coefficient. A in S-N curve (.sigma.$_{ar}$ =A $N_{f}$ $^{B}$). Therefore, considering notched strength the coefficient A was modified. The fatigue lives by this process were agreed well with the experimental results.sults.

• 디지털융복합연구
• /
• 제10권8호
• /
• pp.275-286
• /
• 2012

종합병원 간호사의 노인환자 간호업무로 인한 스트레스, 노인환자와 보호자로 인한 스트레스와 그 대처방법을 탐색적으로 살펴보고자함이 연구의 주요 목적이다. 이를 위해 서울시에 위치한 400병상 이상 의료기관에서 근무하는 간호사를 대상으로 하였고, 총 280부가 최종분석에 사용되었다. 자료 분석방법은 빈도분석, t-검증과 일원분산분석(One-way ANOVA), Scheffe방법으로 사후검증을 하였다. 주된 연구결과는 다음과 같다. 첫째, 간호사의 노인관련 스트레스는 보호자스트레스가 가장 크고, 환자스트레스가 두 번째로 크며, 업무스트레스가 그 다음을 차지하는 것으로 나타났다. 둘째, 간호사들의 대처방법은 사회적 지지를 가장 널리 활용하고 있고, 문제 중심 대처방법을 두 번째로 많이 활용하고 있으며, 그 다음으로 긍정적 관점, 긴장해소, 무관심, 희망적 관점의 순으로 나타났다. 이상의 간호사들의 노인환자에 의한 스트레스 탐색을 통해 노인환자를 위한 복잡하고 다양하며 항상 변화하는 상황에 대처 할 수 있는 능력을 개발하기 위한 몇 가지 후속연구를 제언하였다.

• 소성∙가공
• /
• 제8권1호
• /
• pp.29-37
• /
• 1999

An analysis system for sheet metal forming(SAT_STAMP) has been developed to improve the design and tryout process by predicting the deformation behavior more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achieved due to the improved contact algorithm. Continuous simulation of sequential processes can be carried out conveniently without interruption by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.302-309
• /
• 2017

The ageing of XLPE cable insulation will lead to the accelerating accumulation of space charge, which will greatly affect the safe operation of the HVDC cable. In order to investigate the influence of different ageing modes on the space charge distribution of the HVDC cable, thermal stressed, electrical stressed and electro-thermal stressed endurance tests were carried out on the XLPE peelings. The tested XLPE peelings were obtained from 160kV HVDC cable insulation. The endurance tests were carried at thermal stress of 363K, electrical stress of 20kV/mm DC and a combination of both. The Pulsed Electro-Acoustic (PEA) method was used to measure the space charge distribution of the samples. The influences of ageing on the trap energy distribution were analyzed based on the isothermal relaxation theory and the decay characteristics of the space charge. The results showed that thermal ageing would help to improve the crystalline morphologies of the XLPE at the early stage. The total amount of space charge decreased compared to the ones before thermal ageing. The long term of electrical stress would result in the cleavage of polymer molecule chains which would intensify the accumulation of space charge and increase the density and depth of electron traps. With a combination of electrical and thermal stress, the injection and migration of space charge were more significant. Besides, the depth and density of electron traps increased rapidly with the increase of endurance time.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1002-1012
• /
• 2001

The work reported here is an extensive study of tendon response to multiple cyclic tests including 3% constant peak strain level test (A-type test), 3% constant peak strain level test with two rest periods (B-type test), and 3∼4% different peak strain level test (C-type test). A sufficient number of specimens were tested at each type of the test to statistically evaluate many changes in response during testing and differences in response between each type of the test. In cyclic tests, there were decreses (relaxations) in the peak stresses and hysteresis, increases in the slack strains, and during lower peak strain level (3%) cyclic block after higher peak strain level (4%) cyclic block in the C-type tests. Considering the results of this study and those of the other study of multiple cyclic tests with rest periods by Hubbard and Chun, 1985, recovery phenomena during the rest periods occurred predominantly at the beginning of the rest periods. Consistently in both studies, the effects of rest periods were small and transient compared to the effects of the cyclic extensions. The recovery with cycles at lower peak strain level (3%) after higher peak strain level (4%) in the C-type test has not been previously documented. This recovery seems to be a natural phenomena in tissue behavior so that collagenous structures recover during periods of decreased demand.

• Journal of Biosystems Engineering
• /
• 제17권1호
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• Applied Biological Chemistry
• /
• 제32권4호
• /
• pp.332-337
• /
• 1989

재수화한 동결건조 즉석미반의 리올로지 성질을 통상법으로 취반한 미반과 비교하면서 조사하였다. 온도$(60{\sim}90^{\circ}C)$를 달리한 복원시간에 따른 미립 경도의 역수(연화도)는 복원온도에 상관없이 1차 반응 속도식에 따라 감소하였고, 경도반응의 속도 상수 값은 온도에 따라 증가하였으며, 이의 활성화 에너지는 6.1 kcal/g-mol이었다. 여러 온도 $(60{\sim}90^{\circ}C)$에서 복원시킨 즉석미반의 압축응력 완화 곡선은 통상법으로 취반한 미반과 마찬가지로 일반화된 Maxwell의 6요소 역학모형으로 설명되었고, 즉석미반은 취반미보다 완화되기 쉬우나 복원온도가 높을수록 탄력성이 높아지는 특성을 나타내었다.

• 대한간호학회지
• /
• 제28권4호
• /
• pp.821-831
• /
• 1998

Management of perimenstrual discomfort could be an effective strategy for women's health promotion. This study was designed to develop and test the nursing intervention program for the reduction of the perimenstrual discomfort. The data were collected from a group of 76 female university students (34 in the intervention group, 42 in the control group) during November 20, 1997 and March 10, 1998. Measurements were taken concerning perimenstrual discomfort, self care behavior, and perimenstrual discomfort from both groups, at pre and post intervention. Intervention program involved education, support, counseling, and relaxation training, via individual and group levels over a twelve-week period. Listed are the summarized results : 1. The intervention group had more knowledge con corning perimenstrual discomfort(t=2.290, p=.025), self care behavior(t=3.198, p=.000), and lower perimenstrual discomfort score (t=-4.446, p=.000) than the control group at post intervention. 2. The intervention group showed an enhancement on the knowledge on perimenstrual discomport (t=2.35, p=.025), and decreased the perimenstrual discomfort score(t=-7.36, p=.000). However change of self care behavior was not significant during the intervention. According to this study a developed nursing intervention program is effective for reduction of the perimenstrual discomfort. For a future research, it is necessary that experiments concerning menstruation, and a correlational study of perimenstrual discomfort and stress ill be performed.