• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.79-86
• /
• 1995

The structural materials for cryogenic technology have been recently developed to support the many modern large-scale application from superconducting magnets for nuclear fusion reactor, magnetic levitation railway to LNG tankers. However it is pointed out that quenching phenomenon is one of the serious problems for the integrity of these applications, which is mainly attributed to the rapid temperature rising in the material due to some extrinsic factors of structures. From the viewpoint of fracture mechanics, it is therefore very important to clarify the mechanism of temperature rising of structural material due to cyclic loading at cryogenic temperature. From this purpose, fatigue test was carried out for high manganese steel at liquid helium temperature(4.2K) using triangular stress waveform to identify both the mechanism of temperature rising near crack tip and the effect of loading stress waveform on temperature rising near crack tip and the effect of loading stress waveforms on temperature rising. As the results, two types of temperature rising, that is, regular and burst types were observed. And a periodical temperature rising corresponding to the stress waveforms was also found. The peaks of the temperature rising were recorded near both the maximum and the minimum values of the applied stress. The sudden temperature rises, which indicated the higher values than those of periodical temperature rises under the repetition of stress, were observed at the final region of crack growth. It was shown that the peak values of the temperature rising increased with stress intensity factor range.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.35-42
• /
• 1992

In this study, the stress concentration phenomenon for the dissimilar joints(ceramic-metal) bonded by thermal treating using a soft-insert metal(copper) was investigated with the aid of FEM(finite element method) under the load condition of uniform tension. The analysis was carried out by the supposing that stress states are plane stress or plane strain and elastic or elastic-plastic. And the Von Mises yield criterion and the incremental theory as plastic flow were adopted in this analysis. As the summarized results obtained, the stress concentration phenomenon was severer as the soft insert metal was thicker, in plane strain than in plane stress and in elastic-plastic state than in elastic state. Furthermore, the inducing mechanism of stress concentration was well expressed by the constraint forces(Fc) generated between the soft and the hard material.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.84-90
• /
• 2002

The strength and the life of welded components are affected extensively by the residual stresses distributed around their weldments not only under static loads, but also fatigue loads. The residual stress can be superimposed with externally applied loads, so that unexpected deformations and failures of members will be occurred. These residual stresses are not kept constant, but relaxed or redistributed during in service. Under static loads the relaxation takes place when the external stress superimposed with the residual stress exceeds locally the yield stress of material used. It is shown that under fatigue loads the residual stress is considerably relieved by the first or flew cycle loading, and then gradually relaxed with increasing loading cycles. In this study the phenomenon and mechanism of the stress relaxation by mechanical means were investigated and a model to predict quantitatively the residual stress relaxation for the case of static and fatigue loading condition was proposed.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.37-42
• /
• 1989

Periodic layered domain structures in doped LiNbO3 crystals grown by Czochralski method were obtained by thermal fluctuation and crystal rotation with inhomogeneous radial temprature distribution. The stressinduced domain formation mechanism model was suggested and discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2009

• Corrosion Science and Technology
• /
• 제20권1호
• /
• pp.22-25
• /
• 2021

In the past, Alloy 600 nickel-based alloys have been widely used in steam generators. However, most of them have been replaced by thermally treated alloy 690 tubes in recent years because mill annealed alloy 600 materials are known to be susceptible to stress corrosion cracking. Unlike this general perception, some steam generators using mill annealed alloy 600 tubes show excellent performance even though they are designed, manufactured, and operated in the same way. Therefore, various analyses were carried out to determine causes for the degradation of steam generators. Based on the general stress corrosion cracking mechanism, tube material susceptibility, residual stress, and sludge deposits of steam generators were compared to identify factors affecting stress corrosion cracking. It was found that mill annealed alloy 600 steam generator tubes showed higher resistance to stress corrosion cracking when the amount of sludge deposits on tube surface was smaller and residual stress generated during the fabrication was lower.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.505-506
• /
• 2007

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2512-2531
• /
• 2014

We propose a new Distributed Denial of Service (DDoS) defense mechanism that protects http web servers from application-level DDoS attacks based on the two methodologies: whitelist-based admission control and busy period-based attack flow detection. The attack flow detection mechanism detects attach flows based on the symptom or stress at the server, since it is getting more difficult to identify bad flows only based on the incoming traffic patterns. The stress is measured by the time interval during which a given client makes the server busy, referred to as a client-induced server busy period (CSBP). We also need to protect the servers from a sudden surge of attack flows even before the malicious flows are identified by the attack flow detection mechanism. Thus, we use whitelist-based admission control mechanism additionally to control the load on the servers. We evaluate the performance of the proposed scheme via simulation and experiment. The simulation results show that our defense system can mitigate DDoS attacks effectively even under a large number of attack flows, on the order of thousands, and the experiment results show that our defense system deployed on a linux machine is sufficiently lightweight to handle packets arriving at a rate close to the link rate.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.1-5
• /
• 2008

최근 한반도 및 인근에서 발생한 지진 중, 그 메카니즘이 Waveform Modelling 혹은 Moment Tensor Inversion 등 정량적인 방법에 의해 밝혀진 Mw 5.0 이상의 9개 지진의 발생 원인을 분석한 결과 한반도 및 인접지역에서 발생한 지진의 대부분은 주향 이동 단층 운동에 의한 메카니즘과 다소의 역단층 운동이 첨가된 단층운동 특성을 보여준다. 한반도 및 주변에서 단층작용을 일으킨 주응력 방향은 거의 수평한 동북동-서남서 방향으로 같은 판내 지역인 북동부 중국 지역의 주응력 방향과 매우 유사하고 동해 동부와는 상당한 차이를 보인다. 이는 한반도 및 그 주변에서 지진을 일으키는 주응력은 동쪽에서 유라시아판 밑으로 침강하는 태평양판의 영향뿐만 아니라 서남쪽에서 충돌하는 인도판의 영향도 상당히 작용하는 것으로 해석된다.

• 유통과학연구
• /
• 제15권2호
• /
• pp.111-120
• /
• 2017

Purpose - Service employees who work at airline check-in counters in airport are typically employed to undergo emotional labor. Emotional labor of airport service employees is an important managerial issue that must be solved. This study attempts to examine the underlying mechanism of emotional labor on turnover intention. It focuses on the consequences of emotional labor of service employees. The purpose of this study is to examine and empirically test how the two-types of emotional labor(deep-acting & surface-acting) of service employees differently affect the level of their job satisfaction and job stress. It also investigates the relationship between job satisfaction, job stress, and turnover intention. For this purpose, first, this study identified the structural relationship between emotional labor, job satisfaction, job stress, and turnover intention. Second, it investigated the mediating effects of job satisfaction between deep-acting and turnover intention. Research design, data, and methodology - To empirically test these structural relationships among research variables, data were collected by a interview from service manager of domestic airline companies and survey from 179 service employees who are working at single domestic airline check-in counters in airports in Korea using a self-rating questionnaire with total 19 items dealing with emotional labor, job satisfaction, job stress, and turnover intention. To test the research hypotheses, collected data were analyzed by confirmatory factor analysis (CFA) and structure equation model (SEM). Results - This study obtains meaningful research results. The results from this study are as follows. First, deep-acting has a positive effect on job satisfaction, whereas, deep-acting has a negative effect on job satisfaction. Second, surface-acting has a positive effect on job stress, whereas, the effects of surface-acting on job satisfaction did not show statistically significant result. Also, job satisfaction has partial mediating roles to the relationship between deep-acting and turnover intention. Conclusions - Based on the results of this empirical study, emotional labor of service employees is one of the key factors influencing their job satisfaction and job stress. In particular, deep-acting is the important factor in emotional labor to increase job satisfaction and reduce job stress. Finally, theoretical, managerial implications, and research limitations are mentioned in discussion parts.