• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.294-303
• /
• 2020

This study aimed to examine was conducted to the ability of microclimate control in old pine forests by surveying pine forest in Buddhist temples, where the pine forest are stably growing through active protection in the Gyeongnam region, and comparing variation characteristics of microclimate characteristics (temperature and humidity) and distribution of vegetation type. The study sites were pine forests protected well by Buddhist temples (Haein-sa, Beomeo-sa, Tongdo-sa, and Bulguk-sa) in the southeast region of Korea and thus known for stably growing young pine trees. According to the vegetation distribution status analysis, these pine forests did not have a high ratio of pine trees. Except for Tongdo-sa, the ratio of deciduous forest and mixed (deciduous and pine trees) forest had a much larger presence than that of pine forest. Measured data of microclimate showed that the Tongdo-sa area had significantly different characteristics compared to the other three areas. Tongdo-sa area showed a significantly higher diurnal range of temperatures and humidity than the other three areas, in both spring and summer. It is due to the difference in vegetation management. The forests around Tongdo-sa are mostly pine forests, except for the developed areas, while those in the other three areas have a dominant ratio of deciduous brad-leaved forests. Intensive control of pine forest is not effective in mitigating microclimate, i.e., temperature and air humidity. Stress caused by rising temperatures and decreasing air humidity is blamed for the decline of pine forests. Thus, the current active management of pine forests, such as the Tongdo-sa case, has been found to have a greater negative impact on the temperature and humidity stress. Therefore, we believe that a new change in forest management is necessary to increase the effect of mitigating the microclimate of pine forests.

• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.257-267
• /
• 2008

The mentophysical disease causes diseases in digestive, respiratory, circulating systems, including chronic pain, through combined reactions from different individual characteristics, mental stress and temperamental factors. The most common symptom related to orofacial area is pain and the contributive factors include biological, behavioral, environmental, social, emotional, recognitive factors. These factors affect the course of the symptom according to individual's character and human nature. In pain, sleep acts as a contributive factor, and pain could bring about sleep disturbance and vice versa. Deterioration of sleep quality would act as a factor that aggravates mental stress. Therefore, relatively accurate and simple mental examinations and sleep quality test should be carried out for the patients with symptoms related to orofacial area. This study evaluated the mental state in relation to the sleep quality which could affect orofacial pain. The number of poor sleeper was 18 in male subjects, and 1 in female subjects and PSQI global index was higher in male($6.11{\pm}2.38$) than female($4.67{\pm}2.18$). SCL-90-R index showed no sex difference. Poor sleeper showed significantly high value in SOM, O-C, I-S, ANX, PHOB, PSY, GSI, PST. When SCL-90-R T scores were compared according to sleep quality, higher the subjective sleep quality score, O-C and I-S showed significant increase. As sleep disturbances score increased, PAR, PSY, PST showed statistically significant increase. In comparison of SCL-90-R T score according to daytime dysfunction, statistically significant increase in DEP, ANX, HOS, PHOB, PAR, GSI was observed. Therefore, the quality of sleep and psychological status have a high correlation. This is likely to influence chronic pain in the orofacial field. As a result, clinicians treating orofacial pain should evaluate the sleep quality and psychological status of the patient. Further studies of larger sample sizes including various age, occupation, and pain groups are necessary in order to apply the results to clinical practice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1986

Welded connectors of the cover plates, the transverse stiffeners of the plate girders, and the gusset plates of the plates girders or box girders, were selected as studying objects. A simplified method of drawing the S-N curves in these welded joints by a computer program without the direct fatigue tests was established. The plots on the S-N curve using the values from the practical fatigue tests were compared with the results from the method of the computer programming. The results of these studies are as follows. It appeared that the fatigue life by calculation method was a little less than the practical fatigue life from the actual tests. The latter values included both life $N_c$ of occurrence of initial crack $a_i$ and the life $N_p$ of propagation of critical crack. On the other hand, the former values included only the life $N_p$. Therefore, these results should be considered as justifiable ones. Since the difference between the two results was not significant, the results by calculation method should be in the conservation side when the safety of the structures was considered. Consequently, the results by calculation method should be applicable to the fracture fatigue design of structure. For reference, the same fatigue tests were performed with the specimens of 3 pieces in each case made of the low-strength steel, SS 41. The results went unexpected showing that the fatigue strength was lower in the case of low-strength steel. That is, in the case of the cover plate, the fatigue strength became slowly higher than the case of high-strength steel, SWS 50. That was observed when the maximum testing stress was higher than $14kg/mm^2$. In addition, in the case of the transverse stiffener, the fatique strength became rapidly higher than the case of SWS 50. That was observed when the maximum testing stress was lower than $31kg/mm^2$. It was thought that more such fatigue tests should be performed for more reliable results.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.2
• /
• pp.92-98
• /
• 2007

Purposes: The purpose of this study was to report surgical technique of double bundle anterior cruciate ligament(ACL) reconstruction and to compare the short-term clinical results between arthroscopic single-bundle and double-bundle ACL reconstruction. Materials and Methods: From May 2005 to May 2006, ninety-eight patients were underwent ACL reconstruction. We designed prospective study with sixty-one patients who were revealed isolated ACL injury. We serially checked clinical and radiologic data preoperatively and postoperatively. We compared single-bundle with double-bundle ACL reconstruction patients with preoperative datas and postoperatively 1-year data. There were 30 single bundle reconstruction and 31 double bundle reconstruction. Stability was assessed objectively by anterior stress radiographs with the $Telos^{(R)}$ device and the maximal manual test with the KT-2000 arthrometer. The clinical results were assessed by IKDC(International Knee Documentation Committee) and OAK(Orthopadische Arbeitsgruppe Knie) scores. Also, we evaluated postoperative thigh circumference and range of motion. All of operations were done by only one surgeon. Results: At single-bundle reconstruction group, preoperative AP instability which was checked by $Telos^{(R)}$ device and the maximal manual test with the KT-2000 arthrometer was $7.9{\pm}3.3$ and $7.4{\pm}2.0$, respectively. At double-bundle reconstruction group, it was $8.3{\pm}3.5$ and $7.9{\pm}3.2$, respectively. Residual AP laxity checked at 1 year after operation was $1.9{\pm}1.2$ and $2.2{\pm}1.6$ in single-bundle reconstruction group, and $1.1{\pm}0.9$ and $1.0{\pm}1.0$ in double-bundle reconstruction group. So, double-bundle reconstruction had better results in both anterior stress radiographs with the $Telos^{(R)}$ device and the maximal manual test with the KT-2000 arthrometer, and there were significant differences in statistics. But, clinical results such as IKDC(International Knee Documentation Committee) scores, OAK(Orthopadische Arbeitsgruppe Knie) scores, thigh circumference and range of motion had no significant difference between two groups. Conclusions: On the basis of stability, the side-to-side anterior laxity of double-bundle ACL reconstruction was significantly better than that of single-bundle reconstruction, although there were no significant differences in the other clinical measures among them.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.153-170
• /
• 2007

Loading time and loading environment of the Dokdo seamounts were studied from flexure model and VGP(Virtual Geomagnetic Pole) determined by gravity and magnetic data. In spite of their similarity in size. a large difference about 50 mGal between gravity anomaly peaks of Dokdo and the Isabu Tablemount suggests different compensation degrees. Flexural modeling results show that the flexural rigidity(effective elastic thickness) of lithosphere for Dokdo is stronger(thicker) than that for the Isabu Tablemount. Also, it implies that the age of lithosphere at the time of loading of the Isabu Tablemount may be younger than that of Dokdo. Magnetic anomalies occur complicated over the Dokdo seamounts. Paleomagnetism was studied from VGP estimated by the least square and the seminorm magnetization methods with 1500 m upward continued magnetic anomalies. Age dating of Dokdo from previous study, flexural modeling, VGP, and geomagnetic polarity time scale suggest that after the cease of spreading in the Ulleung Basin, the Isabu Tablemount was formed first in normal polarity interval and followed by Dokdo. Also, they indicate that the fist large eruption of Dokdo was in normal polarity interval and the second large eruption in reversed polarity interval. The Simheungtaek Tablemount was formed in normal polarity interval between the formations of the Isabu Tablemount and Dokdo. These loading times for the Dokdo seamounts show a good coherence with the compressive stress period after the end of the opening of the East Sea. The Dokdo seamounts probably was caused by volcanism associated with the compressive stress.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.165-172
• /
• 2006

Purpose: The purpose of this study is to evaluate the effects of intratunnel fixation in the tibial side on the arthroscopic ACL reconstruction with quadruple hamstring tendon at the second look arthroscopy. Materials and Method: From Dec 1999 to May 2005, we arthroscopically reexamined 32 cases who had been done arthroscopic ACL reconstruction with quadruple hamstring tendons. Hamstring tendons of all cases were fixed at femoral side with RigidfixTM. At the tibial side hamstring tendons were fixed only Post-tie (Group I) or Post-tie combined with IntrafixTM (Group II). At the time of second look arthroscopy mean age of cases was 30 years and mean duration for second look arthroscopy was 21.3 months. We analyzed the results with IKDC score, KT-1000 arthrometer under anesthesia, Telos stress radiography, tibial tunnel widening on the radiography and second look arthroscopic findings. Results: Group II had more superior than group I at side to side differences with KT-1000 and Telos stress radiograph, IKDC score, but the differences were insignificant. At arthroscopic evaluation, Group ll also had more superior than group I at graft tension and graft appearance, graft synovialization, but the differences were insignificant. Tibial tunnel widening in the knee AP radiograph was 2.3 mm in Group I and 1.7 mm in Group II and the difference was significant. (P=0.042) Conclusions: Additional procedure of tibial intratunnel fixation in arthroscopic ACL reconstruction with autogenous hamstring tendon significantly prohibited from tibial tunnel widening but clinical results, radiologic joint stability, findings in second look arthroscopy were insignificantly different. We concluded that Post-tie itself induced satisfactory clinical results, joint stability and graft maturation and that tibial tunnel widening did not affect the results.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.107-113
• /
• 2012

Purpose: The purpose of this study was to evaluate the posterior cruciate ligament (PCL) reconstruction with single bundle, single-incision technique using Achilles tendon and tibialis anterior allograft with ligament remnant preservation. Materials and Methods: Twenty six patients underwent PCL reconstruction was included. There were 21 males and 5 females. Mean age was 32 years. Used graft was a fresh frozen Achilles tendon allograft (group I, 14 cases) and tibialis anterior allograft (group II, 12 cases). Arthroscopic PCL reconstruction was performed using transtibial, single-incision and single bundle technique with remnant preserving as possible. For clinical evaluation, range of motion, posterior drawer test, Lysholm score, Tegner activity scale, International Knee Documentation Committee (IKDC) grade and posterior stress radiograph were used. The mean follow-up period was 21.6 months (12-40 months). Associated injuries were 5 medial collateral ligament injuries, which were treated by conservative method. Results: Range of motion (ROM) was returned to normal range in 24 cases, but ROM deficit under $10^{\circ}$ flexion was 2 cases at final follow-up period. Preoperative posterior drawer test was 17 cases in grade II and 9 cases in grade III. At final follow-up 13 cases returned within normal grade, 7 cases grade I and 6 cases grade II posterior instability. Lysholm mean score was improved from preoperatively 62 to 90 at final follow-up period. Tegner activity mean scale improved from preoperatively 3.5 to 5.6 at final follow-up period. IDKC grade was grade A was 3 cases, grade B 17 cases, grade C 6 cases. In posterior stress radiograph, posterior displacement was improved from mean 12 mm preoperative to 4.5 mm at final follow-up. There were no statistical differences between two groups in clinical evaluations. There were two cases of re-rupture of graft at the bone-tendon junction in group I. Conclusion: We had successful results of PCL reconstruction with single-incision, single bundle technique using Achilles and tibialis anterior allograft without difference between two groups in patients with PCL injury. There were more re-rupture of graft in Achilles tendon group.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.708-719
• /
• 2007

Glutathione S-transferase genotypes GSTT1, GSTM1 and GSTP1 were characterized in 104 healthy male and female subjects and compared with parameters of oxidative stress at the level of DNA and lipids, with antioxidant enzymes, and with plasma antioxidants in smokers and non.smokers. Of the 104 subjects studied, 57.4% were GSTT1 present and 47.6% were GSTM1 present. The GSTP1 polymorphisms a and b were represented as follows: a/a, 75.5%; a/b, 21.6%; b/b type, 2.9%. The GSTT1 null genotype was associated with decreased glutathione in erythrocytes and elevated lymphocytes DNA damage. GST-Px was higher in GSTT1 null compared with GSTT1 present type. The homozygous GSTP1 genotype was not associated with any antioxidant status or DNA damage. The difference in plasma ${\alpha}$-carotene and erythrocytes GSH-Px and GST activities between smokers and non-smokers was detected in the GSTT1 null genotype. Plasma ${\gamma}$-tocopherol and ${\beta}$-carotene decreased significantly in smokers having GSTM1 null genotype. When GSTT1 and GSTM1 were combined, plasma lycopene and erythrocyte GST were reduced in smokers in both null types of these genes. As for GSTP1 genotype, plasma ${\alpha}$-carotene and erythrocytes GSH-Px decreased significantly in smokers with GSTP1 b/b, while erythrocytes GSH-Px activities decreased in smokers with GSTP1 a/b. The different ${\beta}$-carotene level between smokers and non-smokers was seen with both GSTP1 a/a and a/b genotype. It seems that polymorphisms in the phase II metabolizing enzyme glutathione S-transferase may be important determinants of commonly measured biomarkers.

• The Journal of Internal Korean Medicine
• /
• v.29 no.1
• /
• pp.285-298
• /
• 2008

Objective : This study was aimed to investigated the correlation between the stroke incidence by day of the week and risk factors in acute stroke patients. Methods : From October in 2005 to October in 2007, 673 acute stroke patients wereincluded. Patients were hospitalized within 14 days after the onset of stroke in DongGuk University International Hospital, Kyungwon University In-cheon Oriental Medical Hospital or the Department of Cardiovascular and Neurologic Diseases (Stroke Center), Kyung Hee University Oriental hospital. We investigated general characteristics, stroke types, age group, educational backgrounds, medical history, lifestyle (the impact of stress, exercise, smoking and drinking) and Sasang constitution according to the stroke incidence by day of the week. Results : After examining each participants with day of the week, the order of days by incidence was Monday, Wednesday, Sunday, Saturday, Tuesday, Thursday and Friday respectively. Monday and Tuesday showed the highest ratio. As the aspect of demographic data of subjects, the group under 55 years and from 55 years to 70 years showed the highest ratio on Monday. In the group between 25 years to 55 years, the ratio, by the classification of actual productive age, was statistically higheron Monday. In addition, the ratio showed statistically higherby educational background, from elementary school to high school and over high school. In regard tothe medical aspect, incidence of cerebral hemorrhage showed higher ratio on Sunday, and incidence of brain infarction was higheron Monday. However, there was no difference of the past history between the two groups. With regard tothe aspect of lifestyle of subjects, the group with huge stress before the incidence of stroke showed a higher ratio of stroke incidence on Monday. Participants who didn't exercise regularly and participants who didn't smoke or drink showed higher ratio of stroke incidence on Monday. However, this was not important statistically. In regard to the aspect of Sasang constitution, Soeumin showed the highest ratio of stroke incidence on Wednesday, Taeuminon Monday, and Soyangin on Saturday and Monday. Conclusion : According to these results, several cardiovascular risk factors affect stroke incidences on Monday. Further studies will be needed to help understand the correlation between stroke incidence by day of the week and risk factors in acute stroke patients.