• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.153-160
• /
• 2010

다양한 요인에 의해 성능이 저하된 철근콘크리트 구조물은 보수 보강 공법이 요구된다. 현재 다양한 공법과 신소재를 이용한 보강법의 개발이 진행 중에 있다. 최근에 섬유보강 복합체(FRP)를 이용한 보강공법이 주목받고 있으며, 많은 연구와 개발이 진행 중에 있다. 본 논문에서는 FRP-알루미늄 유공복합보로 보강된 RC보의 화재거동에 관한 실험결과를 제시하고자 한다. 사전가력으로 손상시킨 RC보에 FRP-알루미늄 유공복합보로 보강후 화재노출시킨 결과, 손상율이 높아질수록 화재노출에 더욱 많은 영향을 받았으며, 보강효과가 떨어짐을 실험결과 나타났다.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.319-332
• /
• 2021

The wood-concrete composite is an interesting solution in the field of Civil Engineering to create high performance bending elements for bridges, as well as in the building construction for the design of wood concrete floor systems. The authors of this paper has been working for the past few years on the development of the bonding process as applied to wood-concrete composite structures. Contrary to conventional joining connectors, this assembling technique does ensure an almost perfect connection between wood and concrete. This paper presents a careful theoretical investigation into interfacial stresses at the level of the two interfaces in composite wooden beam- reinforced concrete slab strengthened by external bonding of prestressed composite plate under a uniformly distributed load. The model is based on equilibrium and deformations compatibility requirements in all parts of the strengthened composite beam, i.e., the wooden beam, RC slab, the CFRP plate and the adhesive layer. The theoretical predictions are compared with other existing solutions. This research is helpful for the understanding on mechanical behaviour of the interface and design of the CFRP- wooden-concrete hybrid structures.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.21-32
• /
• 2021

Concrete masonry prisms are strengthened with steel fiber-reinforced mortar (SFRM) overlay and tested for compressive and diagonal tension strength. Masonry prisms are produced in poor condition considering standard workmanship for masonry buildings in Korea. Amorphous steel fibers are adopted for SFRM, and appropriate mixing ratios of SFRM are derived considering constructability and strength. Masonry prisms are strengthened with different fiber volume ratios, while numerous strengthened faces and additional reinforcing meshes are produced for compression and diagonal tension tests. Compression and diagonal tension strength are increased by up to 122% and 856%, respectively, and the enhancement effect for diagonal tension strength was superior compared to compression strength. Finally, the test results and strength prediction equations based on existing literature and regression analysis are compared.

• Computers and Concrete
• /
• 제33권2호
• /
• pp.163-173
• /
• 2024

Fiber-reinforced polymers (FRP) have a proven strength enhancement capability when installed into Reinforced Concrete (RC) beams. The brittle failure of traditional FRP strengthening systems has attracted researchers to develop novel materials with improved strength and ductility properties. One such material is that known as polyethylene terephthalate (PET). This study presents a numerical investigation of the flexural behavior of reinforced concrete beams externally strengthened with PET-FRP systems. This material is distinguished by its large rupture strain, leading to an improvement in the ductility of the strengthened structural members compared to conventional FRPs. A three-dimensional (3-D) finite element (FE) model is developed in this study to predict the load-deflection response of a series of experimentally tested beams published in the literature. The numerical model incorporates constitutive material laws and bond-slip behavior between concrete and the strengthening system. Moreover, the validated model was applied in a parametric study to inspect the effect of concrete compressive strength, PET-FRP sheet length, and reinforcing steel bar diameter on the overall performance of concrete beams externally strengthened with PET-FRP.

• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.1-7
• /
• 2013

In recent years, fiber reinforced polymer plastic composites are readily available in the construction industry. Fiber reinforced polymer composite has many advantages such as high specific strength and high specific stiffness, high corrosion resistance, light-weight, magnetic transparency, etc. In this paper, we present the result of investigation pertaining to the flexural behavior of flange strengthened I-shape pultruded fiber reinforced polymer plastic (PFRP) member using carbon fiber sheet (CFRP sheet). Test variable is consisted of the number of layers of strengthening CFRP sheet from 0 to 3. From the experimental results, flexural strengthening effect of flange strengthened I-shape PFRP member using CFRP sheet is evaluated and it was found that 2 layers of strengthening CFRP sheet are appropriate considering efficiency and workability.

• 열처리공학회지
• /
• 제3권4호
• /
• pp.1-9
• /
• 1990

In this study, the ausformed martensite cooled to $-196^{\circ}C$ with various deformation degrees in Fe-30%Ni-0.24%C alloy was transformed to reversed austenite at $500^{\circ}C$ by cyclic reverse martensitic transformation. The effects of prior deformation and the number of cyclic reverse transformation on the microstructure and the mechanical properities of reversed anstensite were investigated. Experimental results showed that the strength of reversed austenite was higher than that of original austenite. This is due to higher dislocation density and grain refining. The reversed austenite formed from ausformed martensite was highly strengthened by prior deformation. This strengthening effect of reversed austenite is attributed to higher dislocation density than grain fefining. The yield strength of reversed austenite below 30% prior deformation, but above 30% prior deformation the strength of reversed austenite is lower than that of deformed austenite. This is due to partly disappearance of strain hardening effect at higher deformation degree by reverse transformation. The strength of reversed austenite is increased with the number of cyclic transformation. Especially, it is principally strengthened by the first cyclic transformation and shows higher increase in yield strength than that of ultimate tensile strength.

• 국제지역연구
• /
• 제18권3호
• /
• pp.67-88
• /
• 2014

본 연구에서는 중국시장을 중심으로 수익률 전이현상(return spillover effect) 및 변동성 전이현상(volatility spillover effect)을 이변량 VAR-EGARCH 모형을 이용하여 실증 분석하였다. 그리고 최근의 글로벌 금융위기를 중심으로 금융위기 이전과 이후로 나누어서 전이효과를 실증 분석하였다. 실증분석 결과, 전체기간에서 중국으로부터 일본 만이 수익률 전이현상을 가지고 있었고 변동성 전이현상은 미국뿐만 아니라 일본, 한국에게도 모두 영향을 주었다. 기간을 나누어서 분석한 결과, 금융위기 전에는 일본과 한국에게 수익률 전이현상을 가지고 있었고 금융위기 후 그 크기가 상대적으로 증가한 것으로 나타났다. 또한, 중국의 변동성 전이현상도 한국에게 영향을 주고 미국으로부터 영향을 받다가, 금융위기 후 한국을 제외한 미국과 일본은 중국과 양방향의 관계를 가지고 있었고 그 크기가 증가하였다. 하지만 미국으로부터 중국으로의 변동성 전이현상은 감소하는 것으로 나타났다. 이는 글로벌 금융위기 이후 중국시장의 영향력이 증대되고 있음을 의미한다.

• Computers and Concrete
• /
• 제8권2호
• /
• pp.193-206
• /
• 2011

The use of Carbon Fiber Reinforced Polymers (CFRP) to strengthen reinforced concrete beams under bending and shear has gained rapid growth in recent years. The performance of shear strengthened beams with externally bonded CFRP laminate or fabric strips is raising many concerns when the beam is loaded under cyclic loading. Such concerns warrant experimental, analytical and numerical investigation of such beams under cyclic loading. To date, limited investigations have been carried out to address this concern. This paper presents a numerical investigation by developing a nonlinear finite element (FE) model to study the response of a cantilever reinforced concrete T-beam strengthened in shear with side bonded CFRP fabric strips and subjected to cyclic loading. A detailed 3D nonlinear finite element model that takes into account the orthotropic nature of the polymer's fibers is developed. In order to simulate the bond between the CFRP sheets and concrete, a layer having the material properties of the adhesive epoxy resin is introduced in the model as an interface between the CFRP sheets and concrete surface. Appropriate numerical modeling strategies were used and the response envelope and the load-displacement hysteresis loops of the FE model were compared with the experimental response at all stages of the cyclic loading. It is observed that the responses of the FE beam model are in good agreement with those of the experimental test. A parametric study was conducted using the validated FE model to investigate the effect of spacing between CFRP sheets, number of CFRP layers, and fiber orientation on the overall performance of the T-beam. It is concluded that successful FE modeling provides a practical and economical tool to investigate the behavior of such strengthened beams when subjected to cyclic loading.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.343-351
• /
• 2005

본 논문에서는 FRP 외부 부착공법으로 전단 보강된 철근콘크리트 보의 전단강도 예측 모델을 제안하였다. 제안된 모델은 전단 균열각과 전단 경간비와 같은 주요한 설계인자를 고려할 수 있도록 하였다. 제안된 모델의 주요고려사항은 ]nP로 전단 보강된 보의 일반적 파괴 형태인 부착파괴에 대한 전단력 산정이다. 또한 제안된 모델은 기존의 수정 소성이론에 근거한 crack sliding model을 이용하였으며, 아치작용계수를 도입함으로써, 전단 경간비의 영향을 최소화하였다. 최종적으로 본 전단강도 예측 모델을 적용한 해석결과를 실험결과와 비교$\cdot$검증하였으며, 본 제안된 예측 모델이 실험결과와 상당히 일치하는 것을 확인하였다.

• 콘크리트학회논문집
• /
• 제19권3호
• /
• pp.351-358
• /
• 2007

현재 상용되고 있는 강판 보강법이나 탄소섬유 시트 부착 보강법과는 달리, 고장력 인장봉을 이용한 외부 비부착 방식의 보강법은 설치가 간단하고 시공 시간이 짧은 등의 장점이 있다. 또한 외부 비부착 보강법은 콘크리트 표면처리가 필요 없고 에폭시 등의 접착제를 사용하지 않아 환경에 미치는 영향도 적다. 지난 연구에 이어 본 연구에서는 보강된 RC보에 관한 총 9개의 실대형 시험체를 변수별로 제작하여 여러 변수가 실제 구조물에 미치는 영향을 검토하였다. 시험체의 주요 변수는 보강재의 크기와 전단 보강근의 간격, 지지 조건이다. 본 논문에서는 보강된 RC 보의 구조적 거동을 무보강 시험체와 비교하여 기술하였다. 실험 결과 고장력 인장봉으로 보강된 RC보는 무보강 시험체와 비교하여 강도와 휨 성능에서 탁월한 효과를 나타내었으며 전단 보강근이 과소 배근된 시험체에서도 고장력 인장봉에 의한 전단 내력 효과를 보였다.