• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.249-253
• /
• 2008

The purpose of this study was to investigate the properties changes of wool fabrics dyed with safflower red and yellow colorants under Ultraviolet(UV)-light. For this purpose, the wool fabrics dyed with safflower red and yellow colorants were compared with each other after uv-light exposure in terms of K/S value, color changes(${\Delta}E$), morphology, and strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples dyed with safflower yellow colorants decreased less than that of the samples dyed with safflower red colorants. In color changes, as increasing exposure time, $L^*$ and $b^*$ increased, $a^*$ decreased, and thereby ${\Delta}E$ increased in the samples dyed with safflower red colorants, $L^*$ increased, $a^*$ and $b^*$ decreased, and so ${\Delta}E$ increased in the samples dyed with safflower yellow colorants, indicating fading away by uv-light and changes of hue, value and chroma value. But the color change of samples dyed with safflower yellow colorants was less than that of samples dyed with safflower red colorants. SEM pictures showed a severe degradation by uv exposure, regardless of colorants type. Tensile strength slowly decreased until 14 days, and rapidly decreased until 21 days and slowly decreased. Strength retention of the samples dyed with safflower yellow colorants was higher than that of the samples dyed with safflower red colorants.

• 공업화학
• /
• 제10권3호
• /
• pp.486-490
• /
• 1999

타일을 부착시키는 tile 전용 cement mortar가 갖추어야 하는 물성인 우수한 보수성, 작업성, open time, 처짐저항성과 타임접착강도 등을 향상시키기 위해 본 연구에서는 mortar에 첨가하는 혼화제들의 홉합비율을 달리하였을 때 나타나는 특성을 비교 분석하였다. Mortar의 보수성 효과를 주는 hydroxypropylmethylcellulose에 소량의 합성 starch을 첨가해 줌으로써 mortar는 보수성을 유지하면서 겉마름이 적게되었고, open time이 길어져 작업성이 향상되었다. 타일의 접착강도를 높이기 위해 polyacrylamide와 ethylenevinyl acetate을 첨가하여 mortar 자체 및 타일의 처짐을 줄였고, 바탕면과 타일과의 mortar 접착력을 증대시켰다. 이와 함께 melment의 첨가로 mortar에 유동성을 주어 작업성을 향상시켰다. 이들 첨가제의 필요량은 cement량에 대해 hydroxypropyl methylcellulose는 0.80~1.20%, starch 0.10~0.15%, polyacrylamide 0.001~0.015%, ethylenevinyl acetate 0.05~0.10% 및 melment 0.003~0.005%의 혼합비율일 때 tile cement mortar의 물성이 향상됨을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.181-192
• /
• 1997

The difficulty of endodontic retreatment depends on various factors and it is affected by retention of post. In this experiment, root canal therapy was done in extracted human teeth and cut into 10mm length from the root apex, and then cemented by zinc phosphate cement, Vitremer$^{(R)}$(glass ionomer) luting cement and Panavia 21$^{(R)}$(resin cement). Post preparation was done by #4 Parapost drill at 6mm length and cement was inserted by lentulo spiral. After 24 hours, tensile bond strength, post removal time was measured after the ultrasonic application and the separation site was measured. The following results were obtained. 1. In measuring tensile bond strength, there is no statistical difference between zinc phosphate cement and Panavia 21$^{(R)}$, but Vitremer$^{(R)}$ showed lower value compared with those two cements. (p<0.001) 2. When the post removal time was measured after ultrasonic application, significant different value in order of Panavia 21$^{(R)}$, zinc phosphate cement and Vitremer$^{(R)}$ was shown. (p<0.001) 3. As a result of examining the separating site of each cement, all 16 of zinc phosphate cement group showed the fracture site between cement and post, Vitremer$^{(R)}$ was 13/16, and Panavia 2$^{(R)}$ was 8/16. In case of tooth restoration using Parapost, the use of Panavia 21 showed good retention property than Vitremer$^{(R)}$, but when retreatment is needed the difficulty of post removal will be increased.

• 한국의류학회지
• /
• 제33권3호
• /
• pp.391-400
• /
• 2009

The purpose of this study is to investigate the efficacy of safflower yellow colorant as a natural dye for hair coloring. The dyeing properties of safflower yellow colorant on hair were explored to obtain optimum conditions. Also, the effect of mordant was studied in terms of dye uptake, colorfastness, and hair damage to better understand the characteristics of the colorant. Tensile strength measurement and SEM analysis were carried out for investigating hair damage to light exposure and washing. On the basis of obtained results considering possible hair damage, optimum dyeing conditions were set 100%(o.w.h.) colorant concentration, pH 5, $40^{\circ}C$, and 20min. Dye uptake was improved more effectively by repeated dyeing rather than by increasing concentration. Pre-mordanting method improved dye uptake slightly, irrespective of mordant type. The safflower yellow colorant produced Y colors on hair. Cu and Fe mordants improved washing and light fastness slightly. Better strength retention was obtained with the mordanted-dyed hair than the unmordanted-dyed hair after light irradiation for 40 hours and 10 repeated washing. The hair was more damaged by light exposure than by washing. It was concluded that the safflower yellow colorant can be used as a natural semi-permanent hair dye producing Y color without mordanting.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.34-42
• /
• 2011

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fibers, followed by fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the Hobart mixer were effective on increasing tensile and tear strength at fast drainage, but there were no further increase by kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.513-524
• /
• 1996

Laboratory investigation was conducted to evaluat the mixing effects on organic removal efficiency to treat low-strength synthetic wastewater using modified anaerobic - filter reactor combining anaerobic filter and upflow anaerobic sludge blanket. Using the modified process the low-strength wastewater like municipal sewage could be treated with 85% T-COD removal efficiency at hydraulic retention time of 6 hours. At the constant organic loading of 0.5 kg COD/m 3-day, the organic removal efficiency and effluent COD concentration are increased as influent COD concentration increased from 125 mg/l to 500 mg/l. Mixing effects on organic removal efficiency are evident and optimum mixing speed is found as 50RPM. Placing the granular sludge and media on which slime layer was pre-formed into the reactor seemed to be very effective In achieving short start-up period. Therefore, the steady state was achived after 4 weeks and 1 week based on T-COD and S-COD, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.217-218
• /
• 2011

The advantages of blast-furnace slag concrete may include lower hydration heating velocity, restraint on concrete temperature increase, long-age strength improvement due to latent hydraulic reaction, improved water tightness, and repulsion to chemical erosion. These advantages contribute to the high quality of the blast-furnace slag concrete. However, the blast-furnace slag concrete has its limitations as well. These disadvantages may include retarded setting and elongated retention of mold due to the weak strength of early-age. Nevertheless, much research is currently under way to improve the aforementioned issues. To improve activity of blast furnace slag powder, alkaline irritants has been used. In this study, we analyze effect on activity fineness and rate of substitution of Alkali Activator toward activity.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.34-41
• /
• 1999

Adsorption of cationic polyacrylamide dry strength resins onto the surface of papermaking fibers and fines is critical for their effective utilization. Since dry strength resins are frequently employed when recycled fibers containing a great deal of fines are used as a raw material, their adsorption characteristic onto the recycled fiber fines is of great importance. In this study, effects of recycling on adsorption characteristics of cationic polyacrylamide onto primary and secondary fines were examined. Never dried bleached hardwood kraft pulp was beaten and dried for recycling. In each recycling step the adsorption characteristic of a cationic PAM onto primary and secondary fines was evaluated by kjeldahl nitrogen analysis method. The influence of recycling on water retention value and carboxyl content along with the sheet density and tensile strength was examined. Secondary fines of never dried pulp adsorbed twice as much of C-PAM as the primary fines, however, the adsorption capacity of the secondary fines decreased rapidly during the course of recycling and showed lower adsorption capacily than primary fines.

• 대한치과교정학회지
• /
• 제45권5호
• /
• pp.268-272
• /
• 2015

Clear thermoplastic retainers have been widely used in daily orthodontics; however, they have inherent limitations associated with thermoplastic polymer materials such as dimensional instability, low strength, and poor wear resistance. To solve these problems, we developed a new type of clear orthodontic retainer that incorporates multi-layer hybrid materials. It consists of three layers; an outer polyethylenterephthalate glycol modified (PETG) hard-type polymer, a middle thermoplastic polyurethane (TPU) soft-type polymer, and an inner reinforced resin core. The resin core improves wear resistance and mechanical strength, which prevent unwanted distortion of the bucco-palatal wall of the retainer. The TPU layer absorbs impact and the PETG layer has good formability, optical qualities, fatigue resistance, and dimensional stability, which contributes to increased support from the mandibular dentition, and helps maintain the archform. This new type of vacuum-formed retainer showed improved mechanical strength and rate of water absorption.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.433-440
• /
• 2006

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fiber, and ensued fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the mixer were effective on increasing tensile and tear strength at fast drainage, but not kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.