• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.766-771
• /
• 2000

As using of insulating material of plastic to industrial electric field, thermoset has been gradually substituted for thermoplastic. But changing the material with crystalline has some problem, which is strength or warpage, Especially getting a strength to endure inner pressure is necessary when arc is occurred. So we use the material that is composed of glass fiber to compensate strength. By the way as the reinforced glass-fiber material is used in injection molding, unstableness of dimension is appeared frequently and it is difficult to know warpage pattern. So this paper will be contributed to know warpage pattern of mold product that is upper frame of magnetic contactor caused by glass-fiber orientation with fixed gate-system, when glass-fiber reinforced material with classification of poly-amide is used in injection molding.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.203-206
• /
• 2009

Ultra high strength steels(UHSS) are widely used to fill the needs of lightweight part for automobile, and the control of springback is very important (actor in sheet metal forming using UHSS. In this study, to lighten the center floor side member(CFSM) which is normally manufactured using $600{\sim}800MPa$ steel sheet, new design of the manufacturing process for CFSM using APFC980 has been proposed. To accomplish this goal, the influence of process variables such as die corner radius and die wall angle on the springback were investigated using FE-analysis. In order to insure the validity of FE-analysis, the springback results of FE-analysis was verified with prototype product.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.725-733
• /
• 1999

It is a fundamental experiment to use blast-furnace slag in solidification/stabilization process. The compressive strength and leaching test of Pb and Cr doped samples were evaluated and the effects of heavy-metal ions on the hydration of slag was investigated. Sodium silicates(5wt%) was added as alkali-activator and the effects of replacing a part of slag with flyash or gypsum was also discussed. Pb ion was solidified by encapsulation of matrix. In of slag${\pm}$gypsum binder microstructure was densified by accelerating to form AFt/AFm phase and compressive strength was improved resulting in reducing leaching amount of Pb ion. Cr ion was solidified by substituting with Al ion in aluminate product. Slag+fly ash binder improved compressive strength and decreased leaching amount of Cr ion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.153-154
• /
• 2019

In this study, the fluidity and compressive strength of lightweight mortar using recycling water for pre-wetting of artificial lightweight aggregate were compared and analyzed to maximize the utilization of the recycling water, which is a by-product of the Ready-Mixed Concrete industry. For this purpose, the pre-wetting water was replaced with recycling water at the ratio of 0, 2.5, 5, 7.5 and 10%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.221-222
• /
• 2012

This study is to high early concrete development which reveals 14 MPa within 12 hours in order to reduce the mold time of dismantlement and not do the steam curing of the precast concrete product. About (40~50) min could shorten the final setting time if the coagulation test result cement amount 100 kg/m3 was increased. In the case of the compressive strength, it was exposed to be satisfied the target value with the cement amount 500 kg/m3 combination according to the hardening accelerator addition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.513-516
• /
• 2006

Waste concrete powder(WCP) is a secondary by-product generated while processing waste concrete manufactured to coarse and fine aggregates for concrete. In order to assess the possibility of using WCP as admixture for self-compacting concrete, self-compactability, compressive strength and durability of self-compacting concrete containing waste concrete powder were investigated. Experimental results of this study appeared that in case of SCC mixed with WCP only, self-compactability and compressive strength decreased with increasing mixing ratio of WCP. When Blast-furnace slag(BFS) was added to SCC, self-compactability and compressive strength for a unit amount of cement increased. Also, SCC containing 15% BFS and 15%, 30% and 45% WCP, the dry shrinkage and carbonation depth appeared a tendency to decrease with increasing mixing ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.881-884
• /
• 2006

Wasted phosphogypsum is a by-product from the phosphoric acid process of manufacturing fertilizers. It consists mainly of $CaSO_4{\cdot}2H_2O$ and contains some impurities. The purpose of this study is to utilize wasted phosphogypsum into an admixture for concrete products cured by steam This paper is to investigate the strength properties of cement composites containing high volume phosphogypsum. The cement composites were composed of OPC, phosphogypsum, fly-ash and granulated blast-furnace slag with activators. As a result, the strength of cement composites containing high volume wasted phosphogypsum were shown high level when granulated blast-furnace slag was mixed. Therefore, PG could be used as a steam curing admixture for concrete 2th production with reduction of OPC.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.178-179
• /
• 2019

The cement industry is a large amount of carbon dioxide emission industry, and research and development on non-cement composition is underway at the time when the absolute reduction of cement use is urgently needed. In addition, limestone fine powder is a by-product and is required to be recycled in terms of resource circulation. The compressive strength of the lime cement powder added noncement composition showed that the compressive strength increased as the limestone powder was added. It is believed that limestone fine powder played a role of stimulant such as alkali activator in non-cement composition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.129-134
• /
• 2017

The process of producing a fish trap frame is very complicated and manual, so it is expensive, the quality of the product is unstable, the quality is not guaranteed, the durability is weak, and it cannot be used for a long time. Therefore, we made a fish trap frame-making machine to reduce the manpower and costs and to make robust products. This machine cuts the wire of mild steel to a certain size and then makes the connecting parts into a trapezoid shape by spot welding. In this study, the weld point shear strength between manual and automatic operation was compared and analyzed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.127-139
• /
• 2005

It is very difficult to export the fresh agricultural products to long distant countries such as America and EU without any damage. Fresh exporting products would be met very hazardous environments such as hot and cold weather, heavy trembles with rolling and pitching. Therefore, care should be taken on tight fastening the products inside the container and keeping the designated temperature and relative humidity. The physical strength of outer box should be applied differently because each agricultural product has its own character for packaging. There have been many agricultural products researches for export packaging to the U.S.A. so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength of corrugated fiber board box which would be used to American export packaging of fresh agricultural products such as perilla leaves, green red pepper and spinach.