• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1617-1621
• /
• 2005

In this study, as a basic research to improve braking efficiency of a ventilated disk brake, we carried out a thermal stress analysis. From analysis result, we knew that a maximum mechanical stress by braking pressure and friction force is applicable to 5 percent of yield strength and has no effect on a fatigue life's decrease for brake disk material. While, a maximum thermal stress by frictonal heat is applicable to 43 percent of yield strength and locates on a friction surface. So, we have found that a thermal stress is the primary factor of crack initiation on a friction surface of disk brake

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.16 no.2
• /
• pp.48-52
• /
• 2010

Object: The aim of this study is to descrive the effect of neurodynamic technique and self management exercise for carpal tunnel syndrome patients(CTS) Method: 13 patients with CTS participated in this study. They were from 18 to 70 years old and mean age was 25.3. In the evalutaion, gripping with grip dynamometer, strength of gripping with precision pinchmeter, pain level with visual analogue scale. All measurement of each subject were measure at pre- treatment and post treatment(after 1week) and post treattment(after 2 weeks) stage. The physical therapy program consisted of neurodynamic technique and self management exercise. SPSS 12.0 program was used to compile result. Result: The grip, pinch, VAS-P were significantly difference between pre-treatment and post treatment(after 2weeks)(p<.05) Conclusion: This study suggest that 3weeks neurodynamic technique and self management exercise improved grip and pinch strength and decrease pain score.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.2
• /
• pp.24-32
• /
• 1984

The object of the study is to discuss the effect of magic ink as a surface active substance on the mechanism of chip formation in oblique cutting. The Rehbinder effect has been known as a phenomenon that the mechanical strength reduces when the metal is coated with some surface active substances. In order to interpret these surface effects defined by Rehbinder, the influence on the shear strength of shear plane by coating surface active substances, cutting force by the depth of cut, surface roughness and hardness ratio were observed. The results are as follows: 1. By coating the magic ink on free surface of the forming chip, the effective shear angle increases, and the cuttinbg force and the deformed chip thickness decreases. 2. With the large inclination angle the effective shear angle increases, and the specific cutting force and the friction angle decrease. 3. Cutting of the coated surface improves the surface roughness and the hardness ratio drops, which means another Rehbinder effect.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.591-596
• /
• 2001

In case of continuous steel box-girder bridges, the magnitude of the longitudinal tensile stress on concrete in internal support is larger than the tensile strength of concrete. In this paper, the parametric study was performed to present the effective magnitude of the longitudinal prestress for reducing the longitudinal tensile stress to decrease under the tensile strength of concrete. The parametric study is conducted with changing the steel box-girder section and the span length of bridge. Three dimensional finite element analyses are conducted with ABAQUS program. The behavior of the steel box-girder bridge with prestress is investigated through experimental works on a analogous steel box-girder bridge model, and their results are compared with those of analytical studies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.148-153
• /
• 1995

In this report, the physical and chemical properties of Che-ju aggregates were stedued, and the properties of concrete using 5 types combinations of Che-ju aggreagtes were compared with those of concrete using Dag-jeon area aggreagtes. As a result of the properties of Che-ju aggregates are very different with Dae-jeon area aggregates in many aspects. Especially, entrained air content of aggregate is over 1.5% so that the freezing & thawing resistance of concrete was caused in decrease. And the texture properties of Che-ju aggregates and a little content of the entrained air in mortar increase bonding stress between mortar and aggregate, as a result in improving the compressive strength of concrete. Meanwhile, the relationship between cement water ratio(C/W) and 28days compressive strength of concrete(F28) is derived from the stastical regression using experimental data as $F_{28} = -99 + 276 *($(C/W), so this eqation is useful for mix-design of concrete in Che-ju area.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.676-679
• /
• 2004

In this study, we considered the characteristic of drying shrinkage from age of high strength concrete with garnet minute powder to be industry by-product. The factors of experiment are unit water content$(160kg/m^3)$, water-binder ratio(30, $35\%$), fine aggregate ratio(40, 42, $44\%$), admixture replacement ratio(0, 10, $20\%$), admixture type(garnet minute powder, fly ash, blast-furnace slag). We make a comparative study of shrinkage about concrete with a passage of age(1, 3, 7, 14, 28, 56, 91 days). As a result of experiment, we reach a conclusion as follow. In the same mix condition, as unit water content and fine aggregate ratio go up, the drying shrinkage ratio increase. In the drying shrinkage ratio according to admixture replacement ratio, it goes up when admixture replacement Ratio increase in case of fly ash and blast-furnace slag. But, drying shrinkage ratio decrease when admixture replacement ratio increase in case of garnet minute powder.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.969-972
• /
• 1992

It is shown that the ac breakdown strength, treeing phenomena, oxidation level, and crystallinity of unaged and aged distribution CV cables vary with XLPE insulations (characterizing anti-oxidation) and curing process. The maximum size of bow-tie tree in insulation influenced on the decrease of ac breakdown strength and the increase of oxidation level and crystallinity of XLPE according to aging time lead to increase the size and density of bow-tie trees.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.51-58
• /
• 2006

The old technique of sandblasting which has been used for paint of scale removing, deburring and glass decorating has recently been developed into a powder blasting technique for brittle materials, capable of producing micro structures larger than $100{\mu}m$. Recently, this technique is applied to fabrication of the glass cap for OELD packaging. But, micro crack is generated on the blasted glass, which cause to decrease fracture strength. In this paper, we investigated the effect of blasting parameters on surface characteristics, surface shape and fracture strength of the powder blasted glass surface.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.21-27
• /
• 1997

This paper aims to clarify the effects of grinding conditions in form grinding of Sr-ferrite with the electro-plated diamond wheel. The main conclusions obtained were as follows. (1) The flexural strength and surface roughness of ferrite became the best at the peripheral wheel speed of 1700 m/min. (2) In the case of the depth of cut larger than 0.4mm, crack layers is induced in the ground surface, and the fracture type of chips exhibits slight ductile mode in the depth of cut smaller than 0.2mm. (3) Whe the depth of cut exceeds 0.6mm, the wheel life becomes extremely severe due to the large chipping and brack- age in the diamond grains. However, at the depth of cut .leq. 0.05mm, the diamond grain shows abrasive wear. (4) The decrease of flexural strength and the increase of surface roughness is in proportion to the increase of the feed rate. (5) Most effective nozzle setting angles with various delivery conditions of the grinding fluid, such as nozzle position .PHI. , flow rate Q, etc., were made clear.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.90-95
• /
• 1999

The durability of handmade paper prepared by potassium carbonate cooking of paper multiberry (Broussonetia Kazinoki Sieb).was investigated. The potassium carbonate paper before and after heat aging had better strength properties, breaking length and folding endurance than those of the soda paper, except of lower brightness .After 30 days of heat aging , these strength properties were still maintained . however, there was almost no difference in the infrared spectra and the crystallinities calculated by X-ray diffraction curves between the potassium carbonate paper and the soda a paper. The durability of the potassium carbonate paper was though to be due to decrease in the pulp damage caused by weak alkaline cooking condition. The results indicated that the paper prepared by the potassium carbonate cooling method could have better permanence than that prepared by the conventional soda cooking method.