• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.5
• /
• pp.261-273
• /
• 2022

In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.283-298
• /
• 2022

Landslides triggered by the combination of heavy precipitation and anthropological disturbance in hilly areas cause severe damage to human lives, properties, and infrastructure constructions. A comprehensive investigation of the influencing factors and failure mechanisms of landslides are significant for disaster mitigation and prevention. This paper utilized the combination of detailed geological investigation, physical experimental testing as well as numerical modelling to determine the failure mechanism, and proposed a countermeasures of the Lantian landslide occurred on 2, July 2017. The results reveal that the Lantian landslide is a catastrophic reactivated slide which occurred in an active tectonic region in Southwest China. Because of the unique geological settings, the fully to highly weathered basalts in the study area with well-developed fractures favored the rainwater infiltration, which is the beneficial to slide reactivation. Engineering excavation and heavy precipitation are the main triggering factors to activate the slide motion. Two failure stages have been identified in the landslide. The first phase involves a shallow mass collapse originated at the upper slopes, which extends from the road to platform at rear part, which is triggered by excavation in the landslide region. Subjected to the following prolonged rainfall from 19 June to 2 July, 2017, the pore water pressure of the slope continually increased, and the groundwater table successively rise, resulting in a significant decrease of soil strength which leads to successive large-scale deep slide. Thereinto, the shallow collapse played a significant role in the formation of the deep slide. Based on the formation mechanisms of the landslide, detailed engineering mitigation measures, involving slope cutting, anchor cable frame, shotcrete and anchorage, retaining wall and intercepting ditch were suggested to reduce the future failure risk of the landslide.

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.401-411
• /
• 2022

To obtain the dynamic mechanical properties, fracture modes, energy and brittleness characteristics of Furong Baijiao coal rock, the dynamic impact compression tests under 0, 4, 8 and 12 MPa confining pressure were carried out using the split Hopkinson pressure bar. The results show that failure mode of coal rock in uniaxial state is axial splitting failure, while it is mainly compression-shear failure with tensile failure in triaxial state. With strain rate and confining pressure increasing, compressive strength and peak strain increase, average fragmentation increases and fractal dimension decreases. Based on energy dissipation theory, the dissipated energy density of coal rock increases gradually with growing confining pressure, but it has little correlation with strain rate. Considering progressive destruction process of coal rock, damage variable was defined as the ratio of dissipated energy density to total absorbed energy density. The maximum damage rate was obtained by deriving damage variable to reflect its maximum failure severity, then a brittleness index BD was established based on the maximum damage rate. BD value declined gradually as confining pressure and strain rate increase, indicating the decrease of brittleness and destruction degree. When confining pressure rises to 12 MPa, brittleness index and average fragmentation gradually stabilize, which shows confining pressure growing cannot cause continuous damage. Finally, integrating dynamic deformation and destruction process of coal rock and according to its final failure characteristics under different confining pressures, BD value is used to classify the brittleness into four grades.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.9-15
• /
• 2021

In ultra-dense heterogeneous networks, the amount of interference from small-cell base stations(SBS) to macro-cell user equipments (MUEs) increases significantly as the number of SBSs increases and it causes the MUEs to decrease the signal-to-interference and noise ratio(SINR) and system capacity. In this paper, we propose a small-cell based cooperative multi-point(CoMP) communication scheme that can guarantee the performance of MUEs even when the number of SBSs increases. In the proposed scheme, MUEs first find SBSs that give signal strength equal to or greater than a given SINR threshold and then they are served by different numbers of the selected SBSs using CoMP to improve the performance of MUEs. Simulation results show that the proposed small-cell based CoMP scheme outperforms other interference management or CoMP schemes in terms of the SINR and system capacity of MUEs.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.1
• /
• pp.21-29
• /
• 2023

Purpose : Using a smartphone while walking districts attention and increases the risk of losing balance or falling. Ankle instability is caused by decreased muscle strength and decreased neuromuscular ability leading to postural control problems. Dual tasks increases the risk of falls by reducing postural control in adults with ankle instability. This study aimed to investigate the effect of performing a dual task on balance and muscle activity in adults with ankle instability using a smartphone. Methods : Forty-nine individuals with ankle instability participated in this study. A game of finding the wrong picture was performed using a smartphone in the dual task, and only looking at the blank screen of a smartphone was evaluated in the single task. The participants randomly performed single and dual task to evalutate balance and muscle atcitivy. Balance was evaluated using the Biodex balance system (BBS), and muscle activity was evaluated using surface EMG. Muscle activity of the gastrocnemius and tibialis anterior was measured at the same time as balance. Results : The results of this study showed that overall, anteior/posterior, and medial/lateral balance indices all showed significant differences when performing the dual task compared with those during the single task (p<.05). The muscle activity results showed a significant difference compared with that of the gastronemius muscle on the nondominant side during the dual task (p>.05). Conclusion : The results of this study showed that maintaining balance is more difficult when performing the dual task than during the single task, and only the muscle activity of the nondominant gastrocnemius muscle decreased. The dual task causes a decrease in concentration for postural control, which negatively affects postural stability. Individuals with ankle ankle instability should refrain from performing dual tasks, such as using smartphones, to prevent ankle damage.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.270-276
• /
• 2023

In this study, we analyzed two types of cold forging dies commonly used for manufacturing general nuts and screws to investigate the differences in WC powder according to the lifespan. For both Type I and Type II dies, it was observed that as the lifespan of the molds increases, the area fraction of Co becomes larger and the size of the powder becomes smaller. Moreover, there is a trend where the strength also increases as the lifespan gets longer. Actually, the hardness value of the sample with the longest lifespan is ~ 131 HV higher than the specimen of the shortest lifespan, It is noted that the reduction in toughness of the WC-Co mold is caused by insufficient Co and the decrease in contact surface area of WC-Co results in a reduced bonding surface area. The lifespan of cold-working WC molds increases when the W content and the volume fraction of WC are high, and the size of the WC powder is small. The results can significantly enhance producing high-quality molds with an extended lifespan using WC powder for cold forging.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.184-192
• /
• 2023

The purpose of this study was to compare and analyze the body composition, muscle circumference, and muscle activity of men in their 30s and 50s when the resistance exercise program was applied for 12 weeks, and to provide basic data for the preparation of the resistance exercise program for middle-aged men before entering old age. Nine men in their 30s and eleven 11 men in their 50s participated in the moderate intensity resistance exercise program for 12 weeks. Two weeks before the experiment, body composition, muscle circumference, and EMG were pre-tested, and then body composition and muscle circumference were additionally measured at the 8th week. Body composition, muscle circumference, and EMG were measured within 2 weeks after the 12 week exercise program. The measured data were compared and analyzed by Mixed design two-way ANOVA, and the following results were obtained. The body composition showed a significant difference only in the skeletal muscle mass, and it increased in the 30s group at 8 weeks. Muscle circumference did not show significant difference according to group and time. Muscle activity showed a significant difference according to group and time, and pectoralis major and triceps brachii showed a significant decrease to 30s group. The pectoralis major was higher in the 30s group at all times. In summary, when applying a 12-week resistance exercise program for young men and middle-aged men, the effect of improving muscle strength may appear similar, but they are not consistent, and it is thought that gradual changes in training variables are needed to improve muscle mass.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.71-79
• /
• 2023

Air ingress incidents are major safety accidents in very-high-temperature reactors (VHTRs). Air containing a high volume fraction of oxygen may cause severe oxidation of core components at the VHTR, especially for the significantly thin alloy tube wall in the intermediate heat exchanger (IHE). The research objects of this study are Inconel 617 and Incoloy 800H, two candidate alloys for IHE in VHTR. The air ingress accident scenario is simulated with high-temperature air flow at 950 ℃. A continuous oxide scale was formed on the surfaces of both the alloys after the experiment. Because the oxide scale of Inconel 617 has a loose structure, whereas that of Incoloy 800H is denser, Inconel 617 exhibited significantly more severe internal oxidation than Incoloy 800H. Further, Inconel 617 showed a significant decrease in ultimate tensile strength and plasticity after aging for 200 h, whereas Incoloy 800H maintained its tensile properties satisfactorily. Through control experiment under vacuum, we preliminarily concluded that serious internal oxidation is the primary reason for the decline in the tensile properties of Inconel 617.

• Composites Research
• /
• v.20 no.5
• /
• pp.56-63
• /
• 2007

An approach using complex potentials is presented for analysis of composite plate with an elliptical hole or a rectilinear crack. Composite structure is susceptible to encounter impact damages, which lead to considerable decrease in its residual strength. Such impact damages could be modeled as an equivalent elliptical hole or notch-like crack. Even though finite element method is widely used to analyze stresses or fracture mechanics parameters around such damage, it is tedious to make successive FE-modeling for damage tolerance assessment under fatigue loadings. In this point of view, the solutions based on complex potentials are very simple and easy to use. The computed results are also compared and discussed with those from FEA.

• Composites Research
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2008

The main objective of this study is to investigate the effect of salt water on the mechanical properties of a high modulus carbon-epoxy composite. Specimens were made of a carbon-epoxy composite UPN139B of SK Chemical and tested under inplane tension and shear after 0, 1, 3, 6, 9, and 12 months immersion in 3.5% salt water. Acceleration technique such as temperature elevation was not used. The tensile strengths and modulli in fiber and matrix direction did not show any remarkable degradation until 12 months immersion. In contrast to the tensile properties, shear strength and modulus started to gradually decrease up to about 10% of values of dry specimens after 12 months immersion. It was confirmed through the test that the material UPN139B can be an effective material for the shell structures in salt water to resist against the external pressure buckling because of the high fiber directional modulus and corrosion resistance.