• Restorative Dentistry and Endodontics
• /
• 제44권1호
• /
• pp.5.1-5.9
• /
• 2019

Objectives: The aim of this in vitro study was to evaluate the push-out bond strength of a novel calcium silicate-based root repair material-BIOfactor MTA to root canal dentin in comparison with white MTA-Angelus (Angelus) and Biodentine (Septodont). Materials and Methods: The coronal parts of 12 central incisors were removed and the roots were embedded in acrylic resin blocks. Midroot dentin of each sample was horizontally sectioned into 1.1 mm slices and 3 slices were obtained from each root. Three canal-like standardized holes having 1 mm in diameter were created parallel to the root canal on each dentin slice with a diamond bur. The holes were filled with MTA-Angelus, Biodentine, or BIOfactor MTA. Wet gauze was placed over the specimens and samples were stored in an incubator at $37^{\circ}C$ for 7 days to allow complete setting. Then samples were subjected to the push-out test method using a universal test machine with the loading speed of 1 mm/min. Data was statistically analyzed using Friedman test and post hoc Wilcoxon signed rank test with Bonferroni correction. Results: There were no significant differences among the push-out bond strength values of MTA-Angelus, Biodentine, and BIOfactor MTA (p > 0.017). Most of the specimens exhibited cohesive failure in all groups, with the highest rate found in Biodentine group. Conclusions: Based on the results of this study, MTA-Angelus, Biodentine, and BIOfactor MTA showed similar resistances to the push-out testing.

• Physical Therapy Rehabilitation Science
• /
• 제10권2호
• /
• pp.147-155
• /
• 2021

Objective: This study is to investigate the effect of real-time feedback from the therapist on posture, muscle strength, pain of subjects with forward head posture based on a non-face-to-face complex exercise program. Design: Two-group pretest-posttest design. Methods: Thirty healthy men and women in their twenties with forward head posture with a Craniovertebral angle of 52° or less were targeted, the final selection was made as 15 experimental groups who performed the non-face-to-face intervention program while receiving real-time feedback and 15 control subjects who performed the non-face-to-face intervention program without providing feedback. Six of them were eliminated, and a total of 24 were conducted as subjects. All exercise groups performed an exercise program three times a week, 30 minutes each, for a total of two weeks. Before and after exercise, Craniovertebral angle (CVA), CranioRotation angle (CRA), muscle strength, and tenderness threshold were evaluated. Results: Significant differences were shown in both groups in CVA, and tenderness threshold before and after exercise (p<0.05), and CRA, the left middle trapezius muscle strength, only in the experimental group (p<0.05). In the comparison of theamount of change between exercise groups, the group that received feedback on CVA, CRA and tenderness threshold showed a significant change than the group without feedback (p<0.05). Conclusions: As a result of this study, it can be seen that the therapist's real-time feedback is more effective in improving the forward head posture. This requires feedback from the therapist on posture correction during non-face-to-face exercise intervention.

• 대한토목학회논문집
• /
• 제32권3A호
• /
• pp.149-160
• /
• 2012

파형강판은 보강재 없이 높은 전단 저항력을 가지며, 보강재를 생략함으로써 상부구조의 용접을 최소화하고 피로 성능을 향상시킨다. 이러한 장점으로 인하여 최근에 파형강판을 I-거더의 복부판으로 사용하려는 연구가 여러 연구자들에 의하여 수행되었다. 횡-비틂 좌굴은 I-거더를 설계함에 있어 주요한 설계인자이지만 불균일 모멘트와 같은 실제 하중이 작용하는 파형강판 I-거더의 횡-비틂 좌굴에 관한 연구는 현재 미흡한 실정이므로 이에 대한 연구가 필요하다. 본 연구에서는 파형강판 I-거더의 횡-비틂 좌굴 강도에 관한 연구를 수행하였다. 먼저 선형 모멘트 구배가 작용하는 파형강판 I-거더의 탄성 횡-비틂좌굴 거동에 관한 연구를 유한요소해석을 통하여 수행하였다. 본 연구 결과, 파형강판 I-거의 탄성 횡-비틂 좌굴 거동은 파형강판의 파형 주기수에 따라 달라지는 것을 알 수 있었으며, 선형 모멘트 구배가 작용하는 파형강판 I-거더에 대한 모멘트 구배 수정 계수를 제안하였다. 이 후 비탄성 유한요소해석 결과와 일반 I-거더의 설계 방법을 이용하여 파형강판 I-거더의 비탄성 좌굴 강도에 관하여 연구를 수행하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.104-112
• /
• 2012

In this paper a new method for the design of a simple PI controller is presented and it has been applied in the control of a Boost based PFC rectifier. The Strength Pareto evolutionary algorithm, which is based on the Pareto Optimality concept, used in Game theory literature is implemented as a multi-objective optimization approach to gain a good transient response and a high quality input current. In the proposed method, the input current harmonics and the dynamic response have been assumed as objective functions, while the PI controller's gains of the PFC rectifier (Kpi, Tpi) are design variables. The proposed algorithm generates a set of optimal gains called a Pareto Set corresponding to a Pareto Front, which is a set of optimal results for the objective functions. All of the Pareto Front points are optimum, but according to the design priority objective function, each one can be selected. Simulation and experimental results are presented to prove the superiority of the proposed design methodology over other methods.

• Computers and Concrete
• /
• 제17권1호
• /
• pp.129-140
• /
• 2016

Basalt is a type of volcanic rocks, grey to black in colour, contains less than 20% quartz, 10% feldspathoid, and at least 65% of the feldspar of its volume. Basalt is considered an igneous rock with fine grains due to the rapid cooling of lava. Basaltic rocks have been widely used as aggregate for various purposes. The study presented in this paper was carried out on basalts that are widespread in the Madeira Island of Portugal and that comprise the major source of local crushed rock aggregates. This paper discusses an experimental programme that was carried out to study the effects of basaltic aggregate on the compressive strength and modulus of elasticity of concrete. For this purpose, cylinder specimens with $150{\times}300mm$ dimensions and prism specimens with $150{\times}150{\times}375mm$ dimensions were cast. The experimental programme was carried out with several concrete compositions belonging to strength classes C20/25, C25/30, C30/37, C40/50 and C60/75. The Eurocode 2 indicates the modulus of elasticity should be 20% higher when the aggregates are of basaltic origin, however results showed significant differences and a correction is proposed.

• 대한통합의학회지
• /
• 제5권2호
• /
• pp.43-50
• /
• 2017

Purpose : There is no validated method for measuring the toe flexor strength that can isolate the intrinsic muscles of the foot from the extrinsic muscles. This study compared the hallux flexion force (HFF) and muscle activity in the foot and ankle according to ankle position [plantarflexion (PF), neutral, and dorsiflexion (DF)]. Method : The study enrolled 17 subjects. In the sitting position, the HFF and activities of the abductor hallucis (AbdH), tibialis anterior (TA), and gastrocnemius (GCM) muscles were measured using a digital dynamometer and a wireless electromyography system, respectively. Subjects were instructed to flex the great toe maximally in three different ankle positions. Three 5-second trials were performed to measure the HFF and muscle activities in each condition. Repeated-measures ANOVA was used to compare the variables and paired t-tests with the Bonferroni correction were used for post-hoc pair-wise comparisons. The significance level was set at .016. Result : The HFF in DF was significantly greater than in any other ankle position (p<.01). The TA activity was greatest in ankle DF and that of the GCM was greatest in PF (both p<.01). However, there was no significant difference in AbdH activity according to ankle position. Conclusion : These results suggest that selective strength measurement of the foot intrinsic muscles in HFF should be performed with the ankle in the neutral position.

• PNF and Movement
• /
• 제12권3호
• /
• pp.189-199
• /
• 2014

Purpose: The objective of this case report is to examine the impact of physical therapy using the proprioceptive neuromuscular facilitation (PNF) concept for a patient with shoulder impingement syndrome. Methods: The patient is a 35-year-old female who has felt pain in the right shoulder for one month. The physical examination evaluated sensory integration, pain, joint integration and mobility, posture, reflex integration, range of motion, muscular strength, analysis of movement, and shoulder function. Comprehensive physical therapy was given to the patient, including stretching, mobilization, strengthening, posture correction, coordination improvement, daily activities, and sports exercises. The therapy was given 5 times a week for the first 5 weeks, then 3 times a week for the next 5 weeks. In all, the intervention lasted for 10 weeks. Results: The patient's senses, posture, and muscular strength all improved to a normal level. The degree of pain fell from 3/10 to 0/10 for activities taking place below shoulder height, and from 8/10 to 1/10 for activities above the head. Additionally, joint integration, motility, range of motion, and movements also improved. The disabilities of the arm, shoulder and hand (DASH) for functional evaluation improved from 27.5 to 10.3. Conclusion: Physical therapy using the PNF concept is effective in improving the body structure, function, activity, and participation of patients with motor disorders of the shoulder impingement syndrome.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.681-685
• /
• 2022

COVID-19 사태를 비롯하여 인류는 지속적인 바이러스 감염에 노출되고 있고 감염자를 신속하게 격리하고 접촉자를 추적하여 감염 확산을 방지를 위한 노력이 진행되고 있다. 연락을 통해 확진자 접촉을 확인하는 수동적인 역학조사는 정확성과 신속성 측면에서 한계가 있어 다양한 디지털 기술을 활용한 자동적인 추적 방법이 제안되고 있다. 본 논문에서는 저전력 블루투스 BLE(Bluetooth Low Energy) 기술을 활용하여 접촉을 확인하고 RSSI (Received Signal Strength Indicator) 값에 대한 분석과 보정을 통해 밀접 접촉을 식별하는 알고리즘을 제시하고, 중앙집중형 서버 구조의 바이러스 확산을 방지할 수 있는 시스템을 제안하고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3229-3240
• /
• 2023

Due to neutron radiation, atomic displacement has a significant effect on material in nuclear reactors. A range of secondary displacement models, including the Kinchin-Pease (K-P), Lindhard, Norgett-Robinson-Torrens (NRT), and athermal recombination-corrected displacement per atom (arc-dpa) have been suggested to calculate the number of displacement per atom (dpa). As neutron elastic interaction is the main cause of displacement damage, the focus of the current study is to calculate the atomic displacement caused by the neutron elastic interaction in order to estimate the exact amount of yield strength in a WWER-1000 reactor pressure vessel. To achieve this purpose, the reactor core is simulated by MCNPX code. In addition, a program is developed to calculate the elastic radiation damage induced by the incident neutron flux (RADIX) based on different models using Fortran programming language. Also, due to non-elastic interaction, the displacement damage is calculated by the HEATR module of the NJOY code. ASME E-693-01 standard, SPECTER, NJOY codes, and other pervious findings have been used to validate RADIX results. The results showed that the RADIX(arc-dpa)/HEATR outputs have appropriate accuracy. The relative error of the calculated dpa resulting from RADIX(arc-dpa)/HEATR is about 8% and 46% less than NJOY code, respectively in the ¼ and ¾ vessel wall.