• Korean Journal of Adult Nursing
• /
• v.16 no.1
• /
• pp.123-134
• /
• 2004

Purpose: The purpose of this study was to examine the effect of use of a horticultural program on the cognitive function, activities of daily living, and hand grip strength of institutionalized dementia patients. Method: Twenty three study participants completed a five week protocol comprised of one week of baseline and four weeks of treatment. The study design was a one group repeated measurement study. For the first and fifth week of the study period, data was collected with 3 instruments: Korean Version of Hasegawa Dementia Scale (HDS-K), Katz's ADL index, hand grip strength. Data analysis was conducted by SPSS version 10.0. Result: Total HDS-K score(p=.000), Activities of daily living(p=.013) and hand grip strength(p=.001) was significantly improved after treatment compared to the baseline. Conclusion: The horticultural program was effective for improving cognitive function, ADL and hand grip strength of the dementia patients. Repeated studies utilizing a control group are needed, using various durations, plants and processes, to confirm these results and to standardize the horticultural program protocol.

• PNF and Movement
• /
• v.8 no.1
• /
• pp.11-19
• /
• 2010

Purpose : The purpose of this study was to the effect of task-oriented arm movements and muscle enhancement program using elastic bands on limb muscle strength and activities of daily living of mitochondrial myopathy patient. Method : Single-subject experimental research design was applied to. AB Design was adopted. The study period was approximately four weeks. A baseline period of the three sessions of the experiment, the treatment period B, 3 sessions were conducted. Baseline period to observe the patient's daily life bardel index was measured as an independent feature, MMT as a limb muscle strength was assessed by measuring early. During the period of treatment with serabaendeu limb strength training 30 minutes after the break five minutes after the treatment using MMT limb muscle strength were evaluated. Task-oriented exercise program, and who exercise a week as a treatment was carried out in 30 minutes. Result : All of the scores for each sessional period of treatment when compared to base line and upper limb muscle strengthening exercises on the subjects that did not change significantly. Conclusion : If the muscles and nervous system involvement in patients with symptoms such as muscle weakness and paralysis of upper extremity functional use is difficult.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.348-353
• /
• 2005

In designing the structures of railway rolling stocks, deterministic methods associated with the concept of a safety factor have been traditionally used. The deterministic approaches based on the mean values of applied loads and material properties have been used as safety verification for the design of rolling-stock car body structures. The uncertainties in the applied loading for the high speed train and the strength of new materials in the rolling stocks require the application of probabilistic approaches to ensure fatigue safety in the desired system. Pressure loadings acting on the car body when the train passes through tunnels show reflected pressure waves for high-speed trains and they may cause a fatigue failure in vehicle bodies. Use of new material technology as body structures also introduces uncertainties in the material strength. A probabilistic approach is more adaptable in designing reliable structures when the pressure waves from the tunnels pounds and new material technology is adopted. In this paper, it is proposed that a fatigue design and assessment method based on a reliability which deals with the loading variations on a railway vehicle due to the pressure reflected in tunnels and the strength variations of material. Equation for the fatigue reliability index has been formulated to calculate the reliability assessment of a vehicle body under fluctuating pressure loadings in a tunnel. Considered in this formulation are the pressure distribution characteristics, the fatigue strength distribution characteristics, and the concept of stress-transfer functions due to the pressure loading.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1349-1357
• /
• 2019

The purpose of this study was to investigate to effect of core exercise with swiss ball on sarcopenia index in agriculture older women. A total of 30 subjects(15 Ex group, 15 Con group, 65 over agriculture older woman) were participated in this study. Intervention group were assigned to performing a progressive core exercise training program for 12 weeks(2 time/week). Dependent variable were grip strength, chair stand, muscle mass, 4m gait speed, Timed up and go, and 400m walking. As a result were following. Grip strength was not significantly difference but chair stand was significantly difference in time. And muscle mass was significantly difference in groups. And 4m gait speed, Timed up and go and 400m walking were significantly difference in time. In conclusion, lower body muscle strength and short physical performance battery by muscle activating with core muscle strength training.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.47-53
• /
• 2011

Marine dredged soils taken from navigation channels or construction sites of coastal area usually have a lot of salt in pores of clayey soils. This paper investigates effect of salt on mechanical characteristics of non-salt and salt-rich stabilized dredged soil. The stabilized dredged soil (SDS) consisted of dredged soil and cement. Several pairs of SDS with non-salt and salt-rich dredged soils, noted as N-SDS and S-SDS, respectively, were prepared to compare their strengths and compressibility characteristics. The microstructures, strength and compressibility characteristics of N-SDS and S-SDS specimens at 7 and 28 days of curing time were evaluated using scanning electronic microscope (SEM), unconfined compression test, and oedometer test. It was found that salt concentration of clayey soil affected not only the formation of soil structure but also the strength development of mixture. The compression index and swelling index of S-SDS were also greater than those of N-SDS, which indicated that the compressibility of mixture increased due to salt concentration. Salinity in clayey soil had a negative effect on the strength development and compressibility characteristics of stabilized dredged soils.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.158-166
• /
• 2008

Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.214-224
• /
• 2008

Member force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.

• Journal of Integrative Natural Science
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2013

Polyurethane resin containing isocyanate is marked by excellent tensile and mechanical strengths and this test aims to gauge its applicability as a medical high polymer. Tris [2-(acryloyloxy)ethyl]isocyanurate and hexamethylenediisocyanate were added to a basic mixing ratio of HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (n-vinyl-2-pyrrolidone) and crosslink agent, EGDMA (ethylene glycol dimethacrylate) with increasing proportions and copolymerized respectively. Also, the basic physical properties of the polymerized high polymers including refraction rate, tensile strength, light transmission and water content were measured to confirm that they are appropriate as hydrogelcontact lenses. After measuring the physical properties of high performance polymers produced by adding tris [2-(acryloyloxy) ethyl]isocyanurate, it was found that the average tensile strengths of sample TRIS1 to TRIS10 were between 0.285 and 0.612 kgf, while the average values of refractive index were ranged from 1.441 to 1.449 with water content from 30.00 to 37.35%.The measurement of physical properties of the copolymers generated by adding hexamethylenediisocyanate showed that the average tensile strength of sample HEXA1 to HEXA10 ranged from 0.267 to 1.742 kgf, the refractive index ranged from 1.443 to 1.475 and water contents were in the range of 21.22 to 35.58%. In all combinations the transmission rates satisfied the transmittance of general hydrogel contact lenses. From theresults, it is possible to conclude that the produced copolymers can be used as contact lens materials with excellent tensile strength.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.3
• /
• pp.31-37
• /
• 2023

PURPOSE: This study aimed to investigate the relationship between being underweight and respiratory function indicators such as pulmonary function, respiratory muscle strength, and diaphragm thickness in normal adults without lung disease. METHODS: The participants in this experiment were thirty young adults. To compare the respiratory function between the underweight and normal weight individuals, 15 participants were selected from each of the underweight and normal weight groups based on body mass index. Respiratory function tests were conducted through pulmonary function tests and respiratory muscle strength tests. Diaphragm thickness was measure with ultrasonography, and physical characteristics were obtained from grip strength and waist circumference. An independent t-test was used to compare the averages of the parameters measured in the two groups. RESULTS: In the respiratory function tests between the two groups, statistically significant differences (p < .05) emerged in the ratio of the predicted forced vital capacity (%FVC), the ratio of the predicted forced expiratory volume in one second (%FEV1), maximal expiratory pressure (MEP), and diaphragm thickness at the functional residual capacity (FRC). There was no statistically significant difference in the forced vital capacity, forced expiratory volume in one second, maximal inspiratory pressure, diaphragm thickness at the total lung capacity, and thickening ratio (p > .05). CONCLUSION: Decreases in some variables of respiratory function, such as the %FVC, %FEV1, MEP, and diaphragm thickness at the FRC were observed in underweight subjects. However, it is difficult to determine whether it affected the overall respiratory function. Future studies are needed to clearly identify the relationship between being underweight and respiratory function.