• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.27-39
• /
• 2006

In this study, modified DA-MMT filled NR/DA-MMT nanocomposites were manufactured by a latex method and a compounding method. Cure characteristics and mechanical properties of the Cloisite 15A, carbon black, Na-MMT filled NR compounds and the DA-MMT filled NR compound by a latex method were also evaluated. The filler content of all compounds was 10phr except the carbon black filled compound. Degree of intercalation and dispersion was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). According to the XRD diffraction pattern and TEM analysis, extensive intercalation and homogeneous dispersion of the clay were obtained after the two-roll milling. Although the layer distance was increased, some parts of DA-MMT showed the layer distance of Na-MMT after vulcanization. DA-MMT filled NR compounds showed the highest ODR torques, tensile strength, modulus, and tear energy. The NR/DA-MMT nanocomposite (by a latex method) compared with a NR/DA-MMT nanocomposite (by a compounding method) was found that the improvement of the mechanical properties was mainly due to the degree of dispersion of the clay.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.294-299
• /
• 2010

Clay-loaded polypropylene (PP) nanocomposites were fabricated via melt-compounding of two molecular weight ($M_w$) PPs (140 and 410 kg/mol) and octadecylammine-treated clay (C18MMT), with the assistance of maleic anhydride-grafted PP(PP-MAH), respectively, at $170^{\circ}C$ and $190^{\circ}C$. At both melt-compounding temperatures, the low-$M_w$ PP tends to easily diffuse into silicate layers, especially in the presence of the mobile PP-MAH, resulting in a marked increase in silicate layer spacing (above 58 $\AA$), when compared to 27 $\AA$ in the high-$M_w$ PP-based system. Due to relatively lower melt-viscosity of the low-$M_w$ PP-based system, however, there existed quasi-stacked clay aggregates with a thickness of 60~80 nm, while the high-$M_w$ PP-based nanocomposites showed relatively homogeneous dispersion of clays. The different morphologies are mainly related to changes in the viscoelastic properties of PPs, dependent on the processing temperature and their $M_{w}s$. The slight differences in nanocomposites induce discernible crystallization and mechanical behaviors. High-$M_w$ PP-based nanocomposites containing 1~3 wt% C18MMT showed improvement in both tensile strength and modulus, while maintaining the inherent ductility of pure PP.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.731-736
• /
• 2021

Oil fences effectively prevent the spread of oil spilled in the sea, thereby reducing the damage to the marine environment. However, the fence is damaged by oil and structures at the accident site and is discarded. When incinerated disposal method for discarded fences, fine dust, and harmful materials are generated. Moreover, as a part of the damaged fence is dumped into the sea, it may cause secondary environmental pollution, such as microplastics. Therefore, in this study, durability was measured using the most common solid foam type oil fences. As a result, the reduction rate of after five days of contact was 13 % in seawater and 3 % in oil, affected by temperature changes. Thus, the durability of the fence should be improved because it is exposed to seawater and oil and affected by wind, light, and waves depending on the weather conditions. Therefore, we suggest a method to improve the oil fence inspection to strengthen the durability of the fence's fabric part.

• The Journal of Internal Korean Medicine
• /
• v.42 no.5
• /
• pp.1009-1019
• /
• 2021

Purpose: The aim of this study was to report the improvement of Guillain-Barre syndrome after long-term combination treatment with Korean medicine. Methods: A patient was diagnosed with Guillain-Barre syndrome and treated with herbal medicine, acupuncture, pharmacopuncture, moxibustion, and exercise, including quadruped walking after three hospital admissions. To evaluate muscle strength and weakness, we measured manual muscle function, gait pattern, and the speed of quadruped walking. Results: The patient's muscle weakness in the extremities and gait stance were improved. The speed of quadruped walking was increased. Conclusion: We consider that combined treatment with Korean medicine might be effective for the muscle weakness of Guillain-Barre syndrome with a poor prognostic factor. To verify the effectiveness of this treatment, further research is needed.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.7
• /
• pp.13-23
• /
• 2021

If roads, bridges, buildings, etc. are built on the ground with soft clay or organic soil, there may be a lot of problems in geotechnical engineering such as settlement and stability due to the large settlement and lack of bearing capacity. In extreme cases, it may appear due to shear failure or collapse of the constructed structure, so a ground improvement method is indispensable to increase the strength of the ground and to suppress settlement. In this study, the settlement according to each groundwater level condition was analyzed using the measurement results for the groundwater level conditions, one of the important factors in predicting the settlement in dredged and reclaimed ground, and the groundwater level conditions applied to the settlement analysis were proposed by comparing it with settlement generated 5 years after construction. As a result of the analysis, it is judged that it is reasonable to apply the measured groundwater level during construction and the low water ordinary neap tide (L.W.O.N.T) during load application for the groundwater level in the settlement analysis. In addition, in the case of the dredged and reclaimed ground, it is estimated that the water pressure acting on the clay layer is nonlinear, as the result of the observations of the head of water at the observation points above and below the in-situ clay layer were different.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.19-30
• /
• 2021

The 21st Century Maritime Silk Road (MSR) is an important part of Belt and Road Initiative(BRI). As an economic and trade corridor for dozens of countries in Asia, Europe and Africa, and the port as an important link node, the efficiency of port operation directly affects the implementation of BRI's strategy. On the basis of combining BRI and related evaluation methods of port efficiency, this paper uses DEA-BCC model to select port production berth number and production berth length as input index container throughput and cargo throughput as output index to analyze the port efficiency of 14 ports in China. The results show that: (1) The overall efficiency level of the ports along the MSR is relatively low. Most of the ports have not reached the DEA efficiency and there are different degrees of problems in scale investment and technological improvement. However, this situation is accompanied by the implementation of China's maritime cooperation strategy and becoming better year by year. (2) The low operating efficiency of ports along China's MSR is mainly due to the lack of coordination between scale efficiency and technical efficiency, which is caused by insufficient scale investment in the port itself, weak economic linkage between the hinterland and the port, (3) Whether a port has a strong comprehensive strength does not entirely depend on the cargo throughput or scale but also includes the port's operating efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.688-694
• /
• 2018

The mixture ratio of two-component liquid silicone is important for the inherent physical characteristics of the finished product. Therefore, it is necessary to uniformly control the ratio of the main material and the sub-material. In this paper, a mixing-ratio control system was designed, which consists of a digital flow meter and a flow control system to measure the flow rate of the raw materials and a pumping system to maintain constant pressure and transfer of the raw materials. In addition, a program was developed to control the organic interlocking and mixing ratio. For the verification of the developed system, we compared the actual weight of raw material with the value measured by the flow meter during pumping, and we measured the physical properties of the mixed material by making test samples with and without the application of the mixing-ratio improvement algorithm. The measured value was close to the reference value with a hardness range of 46-47 and tensile strength of 9.3-9.5 MPa. These results show that the mixing ratio of the liquid silicone is controlled within an error range of ${\pm}0.5%$.

• 재활복지
• /
• v.20 no.4
• /
• pp.177-201
• /
• 2016

The purpose of this study is to develop systematical components and implementation of rehabilitation physical activity by analyzing the relative importance among each factor. To achieve the purpose of this study, 20 participants were selected, and they consisted of instructors and adapted physical activity teachers and professional who have experiences in institutes and hospital where have operate program related to rehabilitation physical activity and adapted physical activity program. Delphi technique was conducted for three times by the participants. For the decision of priorities about improvement factors, AHP was performed. The results were as follows. As the result of this study, the factors of the rehabilitation physical activity consisted of six type of exercise; fitness, psychological exercise, aquatic exercise, sense & perception exercise, ambulatory exercise, and motor skills. Also, 21 sub-factors were also extracted. The result from analyzing the priorities of factors was fitness 33.2%, aquatic exercise 20.6%, psychological exercise 16.3%, sense & perception exercise 11.7%, ambulatory exercise 10.8% and motor skills 8.6%. Also, among results from the weighted state of priority factors, muscular strength and endurance were the most importance factor which had 23.4% weighting, and meditation was the least importance factor which had 0.5% weighting.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.493-502
• /
• 2018

Currently, the fabrication of a high-tin bronze spoon by traditional manufacturing techniques involves 10 steps in the bronze ware workshop. Hot forging has a major influence on manufacturing and involves two to three steps. The dendritic ${\alpha}$-phase in the microstructure of the high-tin bronze spoon is refined and finely dispersed through hot forging. In addition, twinning is observed in the ${\alpha}$-phase of the hammered part, and the ${\alpha}$-phase microstructure gradually transform from a polygon to a circular shape due to hammering. In this process, the adjacent ${\alpha}$-phases overlap with each other and remain combined after quenching. The microstructure with the overlapping is also observed in bronze artifacts, and this shows the correlation with technical system. The results of the experimental hot forging of Cu-22%Sn alloys show that the decrease in in the amount of the dendritic microstructure, which forms during casting, is in proportion to the number of processing steps and that the refined grain obtained by hammering contributes to the improvement in the strength of the material. From the hammering marks, which are observed on both the bronze artifact excavated from archaeological sites and on the high-tin bronze spoon produced in the traditional workshop, it is presumed that the knowledge regarding the unrecorded manufacturing system of bronze ware in ancient times has been passed down in a traditional way up to the system used currently.