• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.111-116
• /
• 1997

In this paper, the limit temperature for applying maturity method are discussed. 4 kinds of W/C in combination of 7kinds of curing temperature are selected as experimental parameters. According to the experimental results, high curing temperature and low W/C gain in strength rapidly. And maturity rule can be applied less than $30^{\cire}C$ in W/C of 30~60% in the conditions of this experiment.

• 한국ITS학회 논문지
• /
• 제10권4호
• /
• pp.100-106
• /
• 2011

무선통신환경에서는 RF신호가 매우 심하게 변하는데, 이러한 신호의 변화는 특히 차량통신환경에서 더욱 심해진다. 자동이득제어는 무선통신시스템에서 신뢰성 있는 통신환경을 제공하고 급격하게 변하는 수신신호를 보상하데 중요한 역할을 한다. 본 논문에서는 수신신호세기값과 아날로그-디지털변환값 두 가지 신호를 이용하는 간단하고 향상된 자동이득 제어기법에 대해 논의한다. 시물레이션과 실제 환경에의 측정을 통해 제안된 기법의 성능을 검증한다.

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.73-79
• /
• 2014

In recent years, the performance requested for which an ultra-high rise buildings is diversified. Large spans are designed in order to gain wide workspace. Column positions are shifted in middle stories to provide space different from neighboring floors. Moreover, in the bottom layers of the building, it is becoming more important to expand freedom to plan flexibility such as creating publically opened wide atria that gives attractive free space. Earthquake-proof criteria is also changing not only human life protection deign but also a design that allows functional continuity. In order to achieve thee needs, as one of technology, we have developed ultra-high strength concrete filled tubular (CFT) columns of the box section that combine ultra-high strength concrete with specified strength of $150N/mm^2$ and ultra-high strength steel material with tensile strength of $780N/mm^2$. In this paper, the outline of development of an ultra-high strength CFT column is reported. Also, the structural design of the ultra-high-rise building using the CFT columns is reported.

• Computers and Concrete
• /
• 제23권2호
• /
• pp.133-143
• /
• 2019

The paper presents the experimental investigations into the effect of ground granulated blast furnace slag (GGBFS) on the time-dependent tensile strength of concrete. The splitting and flexural tensile strength of concrete was determined at the ages of 3, 7, 28, 56, 90, 150 and 180 days using the cylindrical and prism specimens respectively for plain and GGBFS concrete. The amount of cement replacement by GGBFS was 0%, 40% and 60% on the weight basis. The maximum curing age was kept as 28 days. The results showed that the splitting and flexural tensile strength of concrete containing GGBFS has been found lower than the plain concrete at all ages and for all mixes. The tensile strength of 40 percent replacement has been found higher than the 60 percent at all ages and for all mixes. The rate of gain of splitting and flexural tensile strength of 40 percent GGBFS concrete is found higher than the plain concrete and 60 percent GGBFS concrete at the ages varying from 28 to 180 days. The experimental results of time-dependent tensile strength of concrete are compared with the available models. New models for the prediction of time-dependent splitting and flexural tensile strength of concrete containing GGBFS are proposed. The present experimental and analytical study will be helpful for the designers to know the time-dependent tensile properties of GGBFS concrete to meet the design requirements of liquid retaining reinforced and pre-stressed concrete structures.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.401-409
• /
• 2020

Artificial neural networks are used as a useful tool in distinct fields of civil engineering these days. In order to control long-term quality of Self-Compacting Semi-Lightweight Concrete (SCSLC), the 90 days compressive strength is considered as a key issue in this paper. In fact, combined artificial neural networks are used to predict the compressive strength of SCSLC at 28 and 90 days. These networks are able to re-establish non-linear and complex relationships straightforwardly. In this study, two types of neural networks, including Radial Basis and Multilayer Perceptron, were used. Four groups of concrete mix designs also were made with two water to cement ratios (W/C) of 0.35 and 0.4, as well as 10% of cement weight was replaced with silica fume in half of the mixes, and different amounts of superplasticizer were used. With the help of rheology test and compressive strength results at 7 and 14 days as inputs, the neural networks were used to estimate the 28 and 90 days compressive strengths of above-mentioned mixes. It was necessary to add the 14 days compressive strength in the input layer to gain acceptable results for 90 days compressive strength. Then proper neural networks were prepared for each mix, following which four existing networks were combined, and the combinatorial neural network model properly predicted the compressive strength of different mix designs.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.254-262
• /
• 2003

본 연구는 내한촉진제를 사용한 한중콘크리트의 배합선정, 제조 생산, 타설 및 양생 등 실구조물에 대한 적용성에 관한 것이다. 내한촉진제의 사용량 및 물-시멘트비의 선정이 한중콘크리트의 초기동해방지 및 강도증진성상에 커다란 영향을 주기 때문에 배합설계단계에서 충분한 검토가 필요하다. 내한촉진제를 사용한 굳지 않은 콘크리트의 유동성상은 전반적으로 동일 물-시멘트비에서 유사한 결과를 나타나고 있었으며, 고성능감수제의 종류에 따른 경시변화 검토결과, 초기 플로우 및 유동성 손실이 적게 나타나는 폴리카르본산계 고성능감수제가 멜라민계 보다 우수한 것으로 판단된다. 강도관리용 공시체는 기존의 현장봉함 양생보다는 실구조물의 온도이력과 유사한 경향을 보이는 간이단열방법으로 양생하는 것이 유효할 것으로 판단된다. 로지스틱곡선을 이용하여 각 양생 방법별 내한촉진제를 사용한 한중콘크리트의 강도증진성상을 검토한 결과, 강도증진에 미치는 내한촉진제의 영향이 상온조건보다는 저온조건 하에서 효과가 높은 것으로 나타났다. 내한촉진제를 사용한 콘크리트는 평균 외기온 $-2^{\circ}C$(최저기온$-12^{\circ}C$)에서 간단한 비닐양생만으로 초기동해 방지를 위해 필요한 압축강도 $5N/{mm}^2$의 발현이 가능하였고 재령28일에 목표로 하는 소요강도를 만족시켰다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.431-436
• /
• 2002

In this paper, to seek a solution of reducing autogenous shrinkage three types of bar restricted concrete specimens which have similar compressive strength were tested. The three type of concrete were plain concrete-P25 type, $10^{\circ}C$ fly-ash replaced concrete-F10 type, and $1^{\circ}C$ expansion admixture replaced concrete-SP1 type, and with the test result an experimental study was conducted to gain the tensile stress of concrete. From the result of P25, SP1, F10 tests, it was found that by the age of 14 the ratios of tensile stress to tensile strength of three specimens are $75^{\circ}C$, $47^{\circ}C$, $52^{\circ}C$ respectively. so we came to a conclusion that the SP1-type concrete has better capacity to reduce autogenous shrinkage than F10-type concrete at similar compressive strength condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.5-10
• /
• 1992

The aim of this study is to decide the optimum replacement method when mineral Admistures as SILCA FUME and FLY ASH are used, as a part of practical use of ultra High-Strength Concrete. For this purpose, Four types of replacement methods are examined and the relationship between replacement methods and concrete properties is studied. As a result, workability and gain of strength are dependent on the replacement method of mineral Admixtures. The methods of using volumn ratio of cement in FIY ASH, weight ratio of cement in SILCA FUME are shown better workability and strength of concrete than any other replacement method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.290-293
• /
• 2006

Glass fiber reinforced polymer (GFRP) bars gain increasingly more attention in the civil engineering community. GFRP reinforcement for concrete does not have the same shape as steel reinforcement. Therefore, the bond performance of FRP bars, unlike that of steel, is dependent on their design, manufacture and mechanical properties. It was tested in order to examine the bond behavior of GFRP bars under different compressive strength of concrete. Test results showed that the bond strength of GFRP increased with the compressive strength of concrete.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.105-111
• /
• 2020

이 연구에서는 화학적 열화 및 생물학적 열화에 노출된 콘크리트의 보호를 위해 개발된 글라이코 캘릭스(glycocalix) 코팅재의 응결속도 및 압축강도 발현에 대한 실리케이트계 급결제 혼입의 영향을 검토하였다. 글라이코 캘릭스 코팅재의 적용처에 따라 제안된 단면 뿜어 붙이기용 및 라이닝 공법용 코팅재 배합에서 실리케이트계 급결제의 첨가량을 10mL/L, 25mL/L 및 40mL/L로 변화하였다. 글라이코 캘릭스 코팅재의 경화속도는 박테리아 고정화 재료 양에 의해서도 영향을 받았는데, 40mL/L의 급결제를 첨가한 단면 뿜어 붙이기 및 라이닝 공법용 배합의 종결시간은 각각 80분 및 318분이었다. 급결제를 첨가한 글라이코 캘릭스 코팅재의 강도 발현은 급결제 첨가량이 증가함에 따라 일반 코팅재에 비해 낮은 결과를 보였다.