• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.59-66
• /
• 1985

Presented is a nonlinear constitutive theory which can model the behavior of concrete under dynamic tensile loads. The microcrack plane theory is introduced to describe the static tensile behavior of concrete. The affinity transformation is then employed to include the effects of strain rate due to the dynamic tensile loads. The comparisons are made with the dynamic tensile test data available in the literature. An equation is proposed to predict the strength gain due to the dynamic tensile loads. The theory allows more realistic dynamic finite element analysis of concrete structures.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.347-356
• /
• 2004

In order to extend the lifetime of buildings and civil infrastructure, patch type fibrous composite retrofitting materials are widely used. Retrofitted concrete columns and beams gain stiffness and strength, but lose toughness and show brittle failure. Usually, the cracks in concrete structures are visible to the naked eye and the status of the structure in the life cycle is estimated through visual inspections. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensable and self diagnosis method with optical fiber sensors is very useful. In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.605-608
• /
• 2001

Molybdenum disilicide is widely used for manufacturing high-temperature heating elements owing to its low electrical resistivity, good thermal conductivity, and ability to withstand oxidation at high temperatures. MoSi$_2$heating elements with 4-5wt% of montmorillonite type bentonite as plasticzer and a small amount of Si$_3$N$_4$, ThO$_2$, and B as additives was manufactured. Extruded rods of 3.7mmø and 6.7mmø diameter and 400mm long were fabricated using a vacuum extruder, which were then sinrered for 4-5 hrs. at the max. temperrature of 140$0^{\circ}C$. After 10 minute's oxidation treatment, the diameter of the rod is reduced. The heating elements thus prepared was stable at 1$700^{\circ}C$ and the physical properties such as specific electrical resistivity, hardness, apparent densisty, thermal expansion coefficient, and bending strength were almost identical with thoes of commercial heating elements. In this study we have tried to gain the practical knowledge of manufacturing MoSi$_2$heating elements so that it may be utilized later in a research of pilot scale and eventually be transferred to industry.

• ETRI Journal
• /
• v.19 no.1
• /
• pp.1-12
• /
• 1997

In this paper, we present an improved multicarrier direct sequence (DS) code division multiple access (CDMA) scheme by modifying the system originally proposed by Kondo and Milstein [13]. In this modified system, different spreading sequences multiplied by a data sequence modulate different carriers. This is to prevent the multiple access capability from reducing when the fading characteristics of different carrier frequencies are highly correlated. We have derived a formula which determines the mean values of the relative received signal strength in a single carrier DS CDMA rake system and in a multicarrier DS-CDMA system. We present results on the comparison of the bit error rate (BER) performance of the two systems including the effect of correlation between fading characteristics of different frequencies under various multipath fading conditions. The results indicate that with 50 users the modified multicarrier DS CDMA system can achieve an uncoded irreducible BER of $1.7{\times}10^{-3}$ with an average received signal-to-noise ratio per bit of 10dB, which is better that $3.0{\times}10^{-3}$ achieved by the single carrier DS CDMA rake system, and also show that if multicarrier CDMA system is used with respect to single carrier CDMA system, the SNR gain is up to 4.5 dB for the uncode BER of $10^{-3}$ being achieved.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.519-527
• /
• 1997

The effect of Al content and heating rate on the sintering behavior, microstructure, and mechanical properties of reaction bonded alumina (RBAO) was investigated. As the heating rate became slower a critical Al content which could be added to RBAO increased. The weight gain and linear shrinkage of RBAO containing of 55 vol% Al were 28% and 6.5%, respectively. The relative density of RBAO decreased from 96 to 94%, as the amount of Al increased from 15 to 55 vol%. The hardness of RBAO increased from 17.8 to 19.9 GPa and the bending strength enhanced from 370 to 570 MPa, as the amount of Al increased from 15 to 55 vol%. On the other hand, the wear rate of RBAO degraded from 6.7 to 3.39$\times$10-5 $\textrm{mm}^2$/kg and the fracture toughness decreased from 4.1 to 3.6 MPa.m1/2, as the amount of Al increased from 15 to 55 vol%. Fracture modes were shown to the mixed mode of inter/transgranular. However, transgranular fracture was dominant with increasing the content of Al.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.534-539
• /
• 2010

$HfB_2$-HfC composites were prepared by reactive hot pressing using Hf and $B_4C$ at temperatures of 1800 and $1900^{\circ}C$ for 60 min under 32 MPa in an Ar atmosphere. The reaction sequences of the $HfB_2$-HfC composite were studied through series of pressureless heat treatments ranging from 800 to $1600^{\circ}C$. The effect of size reduction of the starting powders on densification was investigated by vibration milling. Fully dense $HfB_2$-HfC composites were obtained by size reduction of the starting powders via vibration milling. The oxidation behaviour of the $HfB_2$-HfC composites at $1500^{\circ}C$ in air showed formation of a non-protective $HfO_2$ scale with linear mass gain. Examination of the mechanical properties showed that particle size reduction via vibration milling also led to improved flexural strength, hardness and fracture toughness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.879-885
• /
• 2014

In this paper, we designed and fabricated wideband 3-axis isotropic antenna for the Electro-Magnetic Fields(EMFs) measurement. Each part of proposed 3-axis antenna has isotropic characteristics and arbitrary axis of proposed 3-axis antenna could be selectable using RF switch. Also, a resistor was inserted in each axis of proposed 3-axis antenna for improving antenna gain and noise suppression characteristics, and port impedance of each dipole antenna were matched by balun. For the performance verification of antenna, GTEM Cell which generates standard electromagnetic field was used for the derivation of antenna factor and receiver sensitivity. As a result, fabricated 3-axis isotropic antenna has receiver sensitivity of 0.12~4.2 mV/m and typical VSWR of 3.3:1 within a wide operation frequency range from 0.03 MHz to 3 GHz.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2315-2320
• /
• 2016

Background: This study investigated the influence of religious beliefs on the health of cancer patients and identified the factors contributing to the influence. Materials and Methods: A questionnaire survey was conducted using a convenient sampling method. A structured questionnaire was used to the samplings, and the data of 200 cancer patients were collected. Results: The effects of religion on the health of cancer patients achieved an average score of 3.58. The top five effects are presented as follows: (a) Religion provides me with mental support and strength, (b) religion enables me to gain confidence in health recovery, (c) religion motivates me to cope with disease-related stress positively and optimistically, (d) religion helps me reduce anxiety, and (e) religion gives me courage to face uncertainties regarding disease progression. Moreover, among the demographic variables, gender, type of religion, and experience of religious miracles contributed to the significantly different effects of religion on patients. Specifically, the effect of religion on the health of patients who were female and Christian and had miracle experiences was significantly (p< .01) higher than that on other patients. Conclusions: These results are helpful in understanding the influence of religious beliefs on the health of cancer patients and identified the factors contributing to the influence. The result can serve as a reference for nursing education and clinical nursing practice.

• Geotechnical Engineering
• /
• v.12 no.1
• /
• pp.5-20
• /
• 1996

In order to accelerate the rate of consolidation settlement and to gain a required shear strength for a given soft clay deposit, the preloading technique combined with a vertical drainage system has been widely applied. In this'study, the theory of axisymmetric consolidation which considers the variation of compressibility and permeability during the conslidation process, has ben developed. A computer program named AXICON for the analysis of axisymmetric nonlinear consolidation is developed by adopting an explicit finite difference method. Smear and well resistance effects are also considered. The AXICON is capable of analyzing the consolidation behavior of multi -layered deposits and simulates time dependent loading sequence. The results of AXICON are validated with analytical solutions of Hansbo and Barron, and compared with insitu settlements and pore pressures measured in a soft clay deposit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.280-286
• /
• 2006

Determination method of optimum feeding point for the PIFA type internal antenna for the mobile phone handset was studied. Fundamental theory is that radiated gain is basically depended upon the electric field strength between PIFA conductor and ground plane. Feeding point, slit configuration, material and structure of carrier are main factors fur the PIFA performances. It is shown that maximum electric field strengths of other feeding points decrease in -2dB to -10 dB than optimum point. Ansoft HFSS EM simulator was applied to determine the best feeding point for 2 models of Samsung Electronics mobile phone handset.