• 패션비즈니스
• /
• 제14권2호
• /
• pp.57-72
• /
• 2010

The purposes of the research were to find out the clothing construction factors of the mechanical industry working clothes by analyzing the working clothes supplied to 5 subject companies; and to suggest the optimized sewing conditions and the seam strength and elongation experimental data according to the clothing material and seam types implied to the working clothes collected. The fabric types and trimmings used for the mechanical manufacturing working clothes were Polyester/Cotton(65/35%), Polyester/Rayon(65/35%), Cotton(100%); and linings, interlining, various fastenings etc. 2 stitch types, i.e. lock and two-thread chain stitches were applied to the construction of the flat, lap felled, French, superimposed, lapped and bound seams for the seam strength and elongation experiment. The results derived from the experiment were as follows. (1) The seam strength results according to the seam types were high in the order of lap felled>lapped>flat, superimposed and French seams. (2) Considering the features of the seam construction, as the number of fabric layers at the seam line increased the seam strength also increased. (3) Apart from the highest seam strength from the experiment using the net lining with the main fabric, the seam construction consisting of two fabric layers with the interlining showed relatively high seam strength results. (4) The seam elongations according to the stitch types were high in the order of two-thread chain>lock stitches.

• 대한토목학회논문집
• /
• 제31권5A호
• /
• pp.389-397
• /
• 2011

본 논문에서는 이방향 휨인장강도 시험 시 시험체에 작용하는 등방성 휨인장거동의 구현여부를 실험적으로 증명하기 위해 시험체의 변형률 측정 실험과, 시험체에 등방성 휨인장응력이 작용할 수 있도록 시험법 개선을 위한 연구를 수행하였다. 또한, 개선된 시험법을 적용하여 이방향 휨인장강도와 4점 휨인장강도 시험에 의한 일방향 휨인장강도를 측정하여 비교하였다. 실험 결과, 시험체에 발생하는 등방성 휨인장응력은 시험체의 표면 조건과 뒤틀림 정도에 많은 영향을 받는 것으로 나타났으나, 시험법 개선으로 인해 시험체에 등방성 휨인장응력상태를 확보할 수 있었다. 개선된 이방향 휨인장강도 시험에 의한 이방향 휨인장강도가 일방향 휨인장강도 보다 32% 더 큰 것으로 나타났으며, 분산성은 동일한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.449-452
• /
• 2006

In this study, recently, more highly effective construction materials are needed for a reasonable cause and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. Also, the experiment was not carried out to investigate and analyzed the strength properties and flowability of ultra-high strength accroding to the types of mineral admixtures. Therefore, this is an experimental study to compare and analyze the influence of cementitious materials type on the fluidity and the strength properties of ultra-high strength concrete. For this purpose, it has decided to do the mix proportions of concrete according to the type of cementitious materials (fly ash, blsat furnace slag, silica fume, slag cement) and W/B(23.5, 27.5, 31.5%) has selected. And then we conducted an experiment to find out basic properties of the ultra-high strength concrete such as slump-flow, O-lot and the age of specimens(3, 7, 28, 56days) for compressive strength.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1819-1824
• /
• 2014

건축물 에너지 효율등급제도, 건축물 에너지 소비증명제 등 건축물 에너지 관련 법 제도가 지속적으로 강화되면서, 이에 대응하기 위한 고성능 단열재, 기능성 유리를 적용한 창호의 개발이 활발히 진행되고 있다. 에너지 절약을 위한 기능성 유리의 중요성이 크게 부각되고 있음에 따라 진공유리에 대한 관심이 높아지고 있다. 진공유리의 핵심공정 중 모서리 접합공정은 진공유리의 기밀성, 강도, 형상에 있어 매우 중요한 공정이다. 본 논문에서는 수소혼합가스를 이용하여 전기로 내부에서 두 장의 유리를 접합하였다. 공정변수에 따른 접합유리의 강도와 형상을 측정 및 분석 하였으며, 다구치 실험계획법을 이용하여 접합유리의 강도를 예측하였다. 추가실험을 통해 예측 값과의 오차율을 확인함으로서 실험의 타당성을 검증하였다.

• 소성∙가공
• /
• 제18권5호
• /
• pp.392-400
• /
• 2009

Clinching is a method of joining sheet metals together. This process can be substituted for the resistance spot welding on the joining of aluminum alloys. However, the joining strength of the clinching is lower than that of welding and riveting. The objective of this paper is to evaluate the effect of shape parameters of tools on the joining strength of the clinching and to optimize clinching tools. Twelve parameters have been selected as shape parameters on the clinching tools such as punch and die. The design of experiments (DOE) method is employed to investigate the effect of the shape parameters of tools on the joining strength of the clinching. The neck thickness and undercut of the clinched sheet metal after the clinching, and the separation load at detaching are estimated from the result of FEA using DEFORM. Optimal combination of shape parameters to maximize the joining strength of clinching is determined on the basis of the result of DOE and FEA. In order to validate the result of DOE and FEA, the experiment of clinching is performed for the optimal combination of shape parameters. It is shown from the result of the experiment that optimization of shape parameters improves the joining strength of clinching.

• PNF and Movement
• /
• 제19권3호
• /
• pp.311-319
• /
• 2021

Purpose: The study examined the effects of the proprioceptive neuromuscular facilitation pattern exercise and protein intake on balance, gait ability, and lower extremity muscular strength for sarcopenia in the elderly. Methods: A total of 30 elderly people (65~74years) with sarcopenia were recruited and randomized to Group I (n=10), Group II (n=10), and Group III (n=10). Their balance ability was measured using the functional reach test. Group I performed the proprioceptive neuromuscular facilitation pattern exercise and protein intake. Group II performed the proprioceptive neuromuscular facilitation pattern exercise. Group III performed protein intake. Their gait ability was measured using the Timed Up and Go test. Lower extremity muscular strength was measured using the Five Times Sit to Stand test. Results: As a result of comparison within groups, Group I and Group II showed a significant difference in balance, gait, and lower extremity muscular strength after the experiment (p<0.05), and Group I showed a more effectively significant difference than either Group II or Group III in balance, gait, and lower extremity muscular strength before and after the experiment (p<0.05). Conclusion: This study showed that the proprioceptive neuromuscular facilitation patterns exercise and protein intake was effective in balance, gait ability, and lower extremity muscular strength for sarcopenia in the elderly.

• 보존과학회지
• /
• 제36권4호
• /
• pp.284-295
• /
• 2020

This study focuses on reinforcement agents for wall damage, such as cracks, breakage, or delamination, for mural paintings from the Payathonzu temple. Experiments were conducted with filling and grouting agents based on the reinforcing method. In the filling reinforcement experiment, different mixing ratios of lime to sand, and additives (jaggery, seaweed glue, and Primal SF-016) were used. In the grouting reinforcement experiment, the mixing ratio of lime and pozzolan was the same, and the additive types were identical to the filling reinforcement experiment. The filling reinforcement experiment showed that there were fewer physical changes such as contraction, with a greater mixing ratio of lime to sand, however, the compressive strength decreased as the mixing ratio increased. With additives, the change in volume of agent decreased and the compressive strength increased, which was especially prominent for jaggery and Primal SF-016. The grouting reinforcement experiment showed that there was a remarkable contraction with an increased amount of moisture that originates from the characteristic of grouting agents that requires flowability. With additives, the water content of the agent decreased, whereas the compressive strength and adhesion increased. Among the additives, Primal SF-016 exhibited the highest compressive strength, and seaweed glue exhibited the most considerable viscosity and adhesion. The study results showed that the characteristics of reinforcement agents vary according to the mixing ratio and additives of the filling and grouting agents. Therefore, it is necessary to selectively apply the mixing ratio and additives for different reinforcement agents considering the wall damage for conservation treatments.

• PNF and Movement
• /
• 제14권1호
• /
• pp.33-39
• /
• 2016

Purpose: The purpose of the present study was to examine the effects of the simultaneous application of the combination of isotonics (CI) in proprioceptive neuromuscular facilitation (PNF) and sport taping on the pain and grip strength of patients diagnosed with lateral epicondylitis among H badminton club members and to provide intervention methods for lateral epicondylitis. Methods: The subjects included 10 patients diagnosed with lateral epicondylitis. The CI technique in PNF as well as sport taping were applied to the subjects five times per week for two weeks. The visible analogue scale (VAS) was used to measure decreasing changes in pain, and a grip dynamometer was used to measure grip strength (GS). Paired sample t-tests were conducted to compare values measured before and after the experiment in order to determine differences. Results: The intensities of pain of the experimental groups changed significantly between the times before and after the experiment (p<0.05), and grip strength also changed significantly from the time before after the experiment (p<0.05). Conclusion: When the CI technique of PNF as well as sport taping were applied to patients with lateral epicondylitis, the patients showed significant improvements in pain and grip strength. Since the intervention had quite positive effects on the subjects that complained of lateral epicondylitis by reducing their pain and increasing their grip strength, studies of efficient exercise interventions will be continuously conducted to propose the development of intervention programs.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.129-141
• /
• 2004

The purpose of Lumbar Stabilization is to recover the ability of regulating movement of muscular strength, which currently becomes an essential approach to the treatment for lumbago. Sling exercise is a dynamic exercise and a method of active exercise for the patients to take part in their own treatment. This research is to develop the correlation between Lumbar Stabilization and muscular strength as well as Sling exercise. The subjects of this experiment are 12 healthy and normal male and female lasting for 4 weeks. EMG and Postural Med were used as measuring apparatuses. After experiment of 4 weeks exercises, there was not a meaningful result in the measured result of EMG(P>0.05), But there was a significant increase in the result of Postural Med after the experiment(P<0.05). According to this result, we can find out that there is a significant correlation between Sling exercise and muscular strength as well as Lumbar Stabilization. The increase in the lumbar region augments Lumbar Stabilization and the reaction speed of muscle power. So it recovers the stabilization of spine. This Sling exercise program is efficient for the treatment and prevention of back pain.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.991-996
• /
• 2001

The long-term durability characteristics of high-early-strength concrete were assessed. The effect of long-term durability characteristics of high-early-strength concrete were investigated. In experiment, two different types of fiber were adopted for improvement of durability. High-early-strength fiber reinforced concretes using regulated-set cements are compared with high-early-strength concrete without fiber. The durability performance of the laboratory-cured high-early-strength concrete specimens was determined by conducting an accelerated chloride permeability, abrasion resistance, freeze-thaw, surface deicer salt scaling and wet-dry repetition test. The results indicated that incorporation of fibers enhance durability performance.