• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.95-102
• /
• 2014

In this paper, we propose the high speed PLC-based automatic control system for a smart LED streetlight. The proposed the automatic control system were constructed of a power line modem part and monitoring part, streetlight controller part for the high speed communication frequency band and streetlight ballasts characterization and real-time remote control using a high-speed PLC network, and it was designed to meet to lighting grades conditions of KS road lighting standards. The proposed automatic control system were easy monitoring of the power consumption using PC through to the comparison result of the existing streetlight system. As a result, it was confirmed to the possibility of efficient operation for the real-time monitoring and maintenance by induction of reasonable power consumption through to the LED streetlight state checking and remote-control. In addition, we proved to improvement of expected effects for the power cost savings, the energy efficiency, and streetlight differentiation and advanced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.632-637
• /
• 2016

A streetlight control system was developed using information technology and LED lights for efficient management and energy savings. The proposed system can control the power usage of an LED streetlight luminaire using GPS satellite communication and an Arduino with a built-in microprocessor. A control circuit was designed to control the current using GPS, a control unit, transistor, resistor, and constant-current supply circuit. The circuit was validated through experiments with normal operation. Using GPS, the control system extracts accurate time and location information according to the season, and it controls the current supplied to the LED streetlight according to the extracted time. Power consumption was reduced by more than 11%. The control system could reduce accidents caused by conventional lighting systems used to save energy, and it could improve the inefficient management of energy by preserving constant brightness of a streetlight at times and in areas that have less traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.677-685
• /
• 2017

Supply rate is very low because conventional smart system of streetlight management requires a lot of time and cost until now. In this paper, we demonstrated maintaining system for streetlight which uses LoRaWAN to solve following those reasons. Using LoRaWAN is subject to build long range and low power communication. Furthermore, it helps to make low initial and cost for maintenance. Detecting problem of streetlight in real time and controling streetlight based on situation and environment are additional benefits. This system on control part is carried by administrator in GUI environment. Finally, we verified the proposed system of performance for LoRaWAN communication and sensor accuracy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.137-142
• /
• 2021

A Photovoltaic power streetlight is a system that uses solar energy to charge a secondary battery and then uses it for night lighting through a lamp, and can be configured as a standalone or grid-connected type by installing an LED streetlight at the load end. The energy generated through the solar cell module can be charged to the secondary battery through the charge/discharge control device, and then the LED street light can be turned on and off by comparing the power generation voltage and the charging voltage according to the monitoring of solar radiation, or by setting a specific time after sunset or sunrise. Based on these contents, this paper designed and manufactured a simulated solar power streetlight for education using new and renewable energy utilization and storage functions. Using these educational equipment, students can 1) understand the flow of energy change using renewable energy including sunlight as electric energy, 2) understand new and renewable energy, and cultivate basic design and manufacturing application power of related products, 3) The use of new and renewable energy through power conversion and strengthening of practical training and analysis through hardware production can be instilled.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.62-67
• /
• 2016

In this paper, the IES file was measured by applying a secondary optical lens to a 21 W LED engine, and the lighting calculation software RELUX was used to perform simulations with the data file of this measurement. For two-lane (two way) concrete paved roads, six LED engine are applied to each streetlight and simulation results show that Uo (uniformity) 0.56, UI (longitudinal uniformity) 0.86 and TI (threshold iIncrement) 9% which satisfies the required standards. RELUX was also used to LED streetlights by designing them in three dimensions, that is ${\pm}25%$ of the arm length of 2.8 m standardized by the road lighting standards of the Korea Expressway Corporation. Comparative analysis was carried out on adjustments were made in increments of 0.1 m that Uo, UI, and TI values in the range of arm lengths from 2.1 m~3.5 m. For the arm length range of 2.1 m~2.4 m, Uo was high, whereas UI was low. Therefore, we present the optimal light distribution values designed for an arm length of 2.5 m.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.417-419
• /
• 2014

본 논문에서는 태양광 전지판을 장착한 LED 가로등을 설계 제작하였다. 제작비용을 고려하여 간단한 구조에서 태양광 전지판에 많은 양의 태양광을 받도록 하고, 태양이 없어 발전을 하지 않을 때는 태양광 전지판에 오염 물질이 적게 부착되게 하며 또 태양광 전지판에 붙은 이물질, 오염 물질을 쉽게 제거 작업을 하게 하기 위하여 태양광 전지판을 접을 수 있도록 구성하였다. 또한 LED 인버터를 사용하지 아니하고 직류를 그대로 사용하게 하므로 전기 변환에 따른 에너지 손실을 방지할 수 있고, 이에따라 시스템의 효율을 기할 수 있었다. 본 연구를 통해 LED 등 설계 및 제작 기술, 인버터 변환 없는 직류 사용 효율 증대 기술, 원격 및 수동 조작 Controller 설계 및 제작 기술, 접이식 Sollar Cell 기구물 개발 기술을 확보하고 향후 태양광 전지판 가로등과 관련된 다양한 연구를 할 수 있는 기반을 마련하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1275-1280
• /
• 2018

We made a smartphone interlocking location tracking streetlight and remote display device to compensate the defect of real time identifiable CCTV streetlights and child safety notification applications. It controls brightness of LED by detecting the surrounding brightness and objects with ultrasonic sensor and illuminance senor. The CCTV receives the location of smartphone by Bluetooth and takes the target of the location. It realizes a wireless transmission system that the video is upload to the tablet PC via WiFi.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.19-25
• /
• 2011

With the issue of a Green IT Technology, studies on a environment-friendly luminous source that can reduce Carbon discharge and increase energy efficiency are actively progressed all over the world. Especially, with the problems of high oil price and environmental pollution, LED has made a great attention as a new luminous source that can replace the existing incandescent bulbs and fluorescent lights. In this paper, the proposed streetlight system becomes more intellectual by combining the low power consuming, high efficient, and high luminous LED module with a complex sensor module with temperature, humidity, illumination and motion sensors. Then, we design and implement the Ad-Hoc based LED-IT-Sensor integrated streetlight system that can maximize the energy savings efficiently with central monitoring system and selective remote dimming control by connecting them to the wireless ubiquitous sensor network(USN) using a Zigbee module.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1038-1046
• /
• 2017

In this paper, we propose the design of LED Streetlight Platform with capabilities of weather monitoring and color temperature control. Several previous works are focused on the energy efficiency or data management of streetlight system, but no work has been done on the lighting performance, especially when natural phenomenon such as fog or haze appears on the street and obstructs the visibility of drivers and pedestrians. To solve such issue, we propose the use of two LED lamps with different correlated color temperature, which will be activated interchangeably according to the condition on the street. We also present the design of communication scheme between each devices in the system. Moreover, our experimental results show the LED Streetlight Platform can perform well and the data can be displayed properly at the website.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.6
• /
• pp.408-413
• /
• 2015

Road lighting has emerged in importance as an essential system to secure safety and visibility for drivers and pedestrians. According to the Road Lighting Standards (KS A 3701), the luminance uniformity (U0) should be 0.4, the luminance uniformity for lanes (UI) should be 0.5, and a threshold increment (TI) of 10% should be satisfied. In this study, we conducted simulations using the Relux program in which the secondary optical lens was applied to a 21 W engine. Ten LED engines were installed on a two-way four-lane road, and the simulation result satisfied the requirements with U0 0.47, UI 0.63 and TI 8%. The U0, UI, and TI were compared with the angle of the LED streetlight varied in the range of $9^{\circ}{\sim}15^{\circ}$ with $0.5^{\circ}$ intervals. The range was selected as ${\pm}25%$ of the standard inclination angle of $12^{\circ}$ according to the Road Lighting Standard. The U0 was high and the UI and TI were low when the tilting angle was in the range of $9.5^{\circ}{\sim}10.5^{\circ}$. Consequently, an optimum-design of lighting distribution was obtained for the concrete two-way four-lane road when the inclination angle was $9^{\circ}$.