• 센서학회지
• /
• 제26권1호
• /
• pp.56-59
• /
• 2017

This paper presents the Inkjet-printed strain gauge using PEDOT:PSS. The strain gauge (width 0.6 mm, length 20 mm, thickness $0.3{\mu}m$) was printed on the PET film using PEDOT:PSS ink. The resistance variation of the fabricated strain gauge was measured by the digital multi-meter with the displacement range of -4 to 10 mm. As the measured result, resistance variation (${\Delta}R/R_0$) has approximately 0.75%, linearity of 99.87%. The fabricated strain gauge is expected to the various applications such as tape type pressure sensor, PMS(pressure mapping sensor), wearable devices.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.53-60
• /
• 1997

The strain localization of concrete is a phenomenon such that the deformation of concrete is localized in finite region along with softening behavior. The objective of this paper is to develope a consistent algorithm for the finite element modeling of localized zone in the analysis of the strain-localization in concrete. For modeling of the localized zone in concrete under strain localization, a general Drucker-Prager failure criterion which can consider nonlinear strain softening behavior of concrete after peak-stress is introduce. The return-mapping algorithm is used for the integration of the elasto-plastic rate equation and the consistent tangent modulus is derived. Using finite element program implemented with the developed algorithms, strain localization behaviors for the different sizes of concrete specimen under compression are simulated.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1357-1365
• /
• 2009

In this study, we enhance the numerical approach of Lee et al.$^{(1)}$ to spherical indentation technique for property evaluation of hyper-elastic rubber. We first determine the friction coefficient between rubber and indenter in a practical viewpoint. We perform finite element numerical simulations for deeper indentation depth. An optimal data acquisition spot is selected, which features sufficiently large strain energy density and negligible frictional effect. We then improve two normalized functions mapping an indentation load vs. deflection curve into a strain energy density vs. first invariant curve, the latter of which in turn gives the Yeoh-model constants. The enhanced spherical indentation approach produces the rubber material properties with an average error of less than 3%.

• Korean Journal of Radiology
• /
• 제22권6호
• /
• pp.880-889
• /
• 2021

Objective: This study aimed to investigate the regional amyloid burden and myocardial deformation using T1 mapping and strain values in patients with cardiac amyloidosis (CA) according to late gadolinium enhancement (LGE) patterns. Materials and Methods: Forty patients with CA were divided into 2 groups per LGE pattern, and 15 healthy subjects were enrolled. Global and regional native T1 and T2 mapping, extracellular volume (ECV), and cardiac magnetic resonance (CMR)-feature tracking strain values were compared in an intergroup and interregional manner. Results: Of the patients with CA, 32 had diffuse global LGE (group 2), and 8 had focal patchy or no LGE (group 1). Global native T1, T2, and ECV were significantly higher in groups 1 and 2 than in the control group (native T1: 1384.4 ms vs. 1466.8 ms vs. 1230.5 ms; T2: 53.8 ms vs. 54.2 ms vs. 48.9 ms; and ECV: 36.9% vs. 51.4% vs. 26.0%, respectively; all, p < 0.001). Basal ECV (53.7%) was significantly higher than the mid and apical ECVs (50.1% and 50.0%, respectively; p < 0.001) in group 2. Basal and mid peak radial strains (PRSs) and peak circumferential strains (PCSs) were significantly lower than the apical PRS and PCS, respectively (PRS, 15.6% vs. 16.7% vs. 26.9%; and PCS, -9.7% vs. -10.9% vs. -15.0%; all, p < 0.001). Basal ECV and basal strain (2-dimensional PRS) in group 2 showed a significant negative correlation (r = -0.623, p < 0.001). Group 1 showed no regional ECV differences (basal, 37.0%; mid, 35.9%; and apical, 38.3%; p = 0.184). Conclusion: Quantitative T1 mapping parameters such as native T1 and ECV may help diagnose early CA. ECV, in particular, can reflect regional differences in the amyloid deposition in patients with advanced CA, and increased basal ECV is related to decreased basal strain. Therefore, quantitative CMR parameters may help diagnose CA and determine its severity in patients with or without LGE.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.197-208
• /
• 2000

최 등/sup 1)/은 total lagrangian formulation에 근거한 증분 평형방정식을 적용하고, 강도행렬 산정시 회전각의 2차항을 포함시켜 기하학적 비선형 해석시 해의 수렴성을 향상시켰다. 또한 등매개 쉘 유한요소의 단점인 전단구속 현상과 제로 에너지 모드가 발생하는 문제를 극복하기 위하여 가정 변형률장을 적용하여 보강된 판 및 쉘 구조의 비선형 해석법을 개발하였다. 본 연구에서는 잔류응력을 고려한 쉘구조의 극한강도 해석을 수행하기 위하여, 대변형거동과 함께 소성붕괴거동을 추적할 수 있는 알고리즘을 제시한다. 잔류응력을 고려한 증분평형방정식에 return mapping algorithm을 이용한 탄소성 해석법을 결합시켜서 보강된 판 및 쉘구조의 극한거동을 파악한다. 수치해석 예제를 통하여 본 연구에서 제시된 유한요소 및 비선형 해석 알고리즘에 대한 효율성 및 적용성을 확인하였다.

• 대한지구과학교육학회지
• /
• 제2권1호
• /
• pp.80-90
• /
• 2009

The purpose of this study is to investigate the characteristics of the mind maps which were drawn with pencil or color pens by elementary students. For this study, 31 students of the 6th grade were selected and trained mind mapping. After training, the subjects had drawn mind maps with color pens about the ROCK for 15minutes and drew mind maps with pencil after 2days of mind mapping using color pens. In addition to activities of mind mapping, the students handed in their papers which were written one's impression of drawing two kinds of mind mapping. The results were follows: First, in central circle which was linked words connected firstly with ROCK as key word, the difference of 2kinds mind maps were little showed in the quantity and quality of the words, branches and their adequacy. Second, the mind maps using pencils had more words, branches and images than mind maps of using color pens in the whole assessment. Third, the most students suggested that the mind mapping using pencil were advantage to economy of time, retouching words and branches, also the mind mapping using pencil made the students relax the strain for drawing it because of retouching possibility. Consequently, the results of this study suggest the mind mapping using pencil has advantage effect on the purpose of gaining students' thinking abundantly and economy of time in elementary science classes.

• Journal of Microbiology and Biotechnology
• /
• 제5권1호
• /
• pp.1-5
• /
• 1995

A genomic DNA of alkaliphilic bacterium, Micrococcus sp. Y-l, was analysed using the physical mapping method of pulsed-field gel electrophoresis (PFGE). Five restriction enzymes of Sspl, Hpal, Xbal, Ndel or EcoRI, which recognize the Adenine-Thymine-rich sequences of genomic DNA, were used for the generation of few (7 to 20) distinctly separate fragments, with average sizes in the range of 200～500 kb. However, the sites for Notl and SfiI, 8 base-recognizing enzymes, were highly frequent. The genome size of this strain was determined to be 4 mega base pairs (Mb) from restriction fragments separated by PFGE. This is the first case of restriction mapping in alkaliphilic bacterium.

• 한국미생물·생명공학회지
• /
• 제25권4호
• /
• pp.379-385
• /
• 1997

Several protease-deficient mutants of Aspergillus niger have been isolated by halo-screening on skim milk plate after UV irradiation of conidiospores. The extracellular proteolytic activities of the mutant strains grown in an optimized medium varied from 3% to 85% of that of the parental strain. Especially, two mutant strains named as ANPD-129 and ANPD-153, which had 3% and 49% of acid protease activity of the parental strain, respectively, were further characterized both physiologically and genetically. The growth rates of the mutants, ANPD-129 and ANPD-153, were similar to that of the parental strain, unlike other protease-deficient mutants. The diploid formed between the two mutants restored protease activity to a similar level of that of the parental strain. This result revealed that ANPD-129 and ANPD-153 had mutations at different loci. Using master strains with marked chromosomes these loci were assigned to linkage groups. The mutation locus (prt129) in ANPD-129 was assigned to linkage group VI and the locus (prt153) in ANPD-153 to linkage group III.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1998년도 한국생물과학협회 학술발표대회
• /
• pp.244.1-244
• /
• 1998

No Abstract, See Full Text