• 대한간호학회지
• /
• 제38권5호
• /
• pp.667-675
• /
• 2008

Purpose: The aim of this study was to compare the relation between differently measured sports activities (metabolic equivalent [MET] and peak strain score) and distal radius bone mineral density in college-aged women. Methods: lifetime sports activity was scored in two different ways: 1) a sports activity score by multiplying the intensity (METs) and duration and 2) a sports activity score by adding up physical strain scores based on the ground reaction force of each sports activities. Bone mineral density was measured using dual energy x-ray densitometry (DTX-200) in the distal radius site. Results: In stepwise multiple regression analysis, body weight and sports activities during the college period were significant positive predictors for distal radius bone mineral density. The explained variance of sports activity measured with a peak strain score (8.8%) for distal radius bone mineral density was higher than one measured with the MET score (3.3%). Conclusion: It can be concluded that sports activity scores based on MET and peak strain scores during college are very important for determining the bone mineral density in the distal radius site in women under 30.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1198-1201
• /
• 2004

To investigate the bone remodeling phenomenon around screw tooth of the implant for osteointegration, a finite element model of the screw was developed. Strain energy density was chosen for the indicator for remodeling process. The modified mathematical equation for remodeling process was applied to 2-dimensional tibia and implant model under static bending state Caculated results show reliable remodeling process compared with histology data.

• Earthquakes and Structures
• /
• 제15권2호
• /
• pp.123-132
• /
• 2018

In this paper the strain energy density (SED) model is used to analyze the seismic behavior of suspen-domes and a new criterion is established for judging the seismic failure based on a characteristic point in the SED model. Firstly, a nonlinear time-history response analysis was carried out using the finite-element package ANSYS for typical suspen-domes subjected to different ground motions. The seismic responses including nodal displacements, ratios of yielding members, strain energy density and structural maximum deformation energy were extracted corresponding to the increasing peak ground acceleration (A). Secondly, the SED sum ($I_d$) was calculated which revealed that the $I_d-A$ curve exhibited a relatively large change (called a characteristic point) at a certain value of A with a very small load increment after the structures entered the elastic-plastic state. Thirdly, a SED criterion is proposed to judge the seismic failure load based on the characteristic point. Subsequently, the case study verifies the characteristic point and the proposed SED criterion. Finally, this paper describes the unity and application of the SED criterion. The SED method may open a new way for structural appraisal and the SED criterion might give a unified criterion for predicting the failure loads of various structures subjected to dynamic loads.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.102-109
• /
• 2002

The fatigue crack growth under mixed mode condition has been discussed within the scope of linear fracture mechanics such as maximum tangential stress, maximum tangential principal stress and minimum strain energy density. The purpose of this study is to investigate the characteristics of fatigue test crack growth in 304 stainless steel under mixed node. The fatigue test results carried out by using inclined pre-crack specimens was compared to both of the theoretical predictions of the criteria, maximum tangential stress and stain energy density. As difference from theoretical analysis, the transition region from mixed mode to mode I appeared in the fatigue test. There is deep relationship between the angle of slanted pre-crack and transition. Therefore, as applying the different stress intensity factor to each node I+II and mode I, the directions and rates of fatigue crack growth are evaluated more accurately under mixed mode.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.699-706
• /
• 2018

In the present contribution, fracture resistance of U-notched GPPS members under mixed mode I/III loading conditions is assessed by using the Averaged Strain Energy Density (ASED) criterion. This criterion has been founded based on the ASED parameter averaged over a well-defined control volume embracing the notch edge. The validation of the theoretical criterion predictions is evaluated through comparing with the results of a series of mixed mode I/III fracture tests conducted on rectangular-shaped GPPS specimens weakened by a single edge U-notch. A recently developed apparatus for mixed mode I/III fracture experiments is employed for measuring the fracture loads of the specimens. The test samples are fabricated with different notch tip radii with the aim of evaluating the influence of this major feature of the U-notched components on the mixed mode I/III fracture behavior. It is shown that the onset of brittle fracture in U-notched GPPS specimens under various combinations of tension and out-of-plane shear can well be predicted by means of the ASED criterion.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.349-354
• /
• 2009

초고층 건물의 안전성 및 사용성을 합리적으로 확보하고 유지하기 위해서 부재의 구조 반응 모니터링은 필요하다. 이러한 대형 건물의 건전도 모니터링은 최근 들어 많은 연구자들에 의해서 관심 되어지고 있지만 건물 특성상 계측 대상 부재가 많고 하중과 구조반응의 관계가 복잡하기 때문에 센싱 부재 선정의 어려움으로 그 적용에 한계가 있다. 본 논문에서는 부재의 변위기여도 및 변형에너지밀도를 기반으로 초고층 건물의 안전성 모니터링을 위한 구조반응 계측 부재 선정에 대한 연구를 수행하였다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.177-187
• /
• 2021

The effect of nanoparticle volume fraction on the elastic properties of a polymer-based nanocomposite was experimentally investigated and the obtained results were compared with various existing theoretical models. The nanocomposite was consisted of high density polyethylene (HDPE) as polymeric matrix and 0, 0.5, 1 and 1.5 wt.% multi walled carbon nanotubes (MWCNTs) prepared using twin screw extruder and injection molding technique. Nanocomposite samples were molded in injection apparatus according to ASTM-D638 standard. Therefore, in addition to morphological investigations of the samples, tensile tests at ambient temperature were performed on each sample and stress-strain plots, elastic moduli, Poisson's ratios, and strain energies of volume units were extracted from primary strain test results. Tensile test results demonstrated that 1 wt.% nanoparticles presented the best reinforcement behavior in HDPE-MWCNT nanocomposites. Due to the agglomeration of nanoparticles at above 1 wt.%, Young's modulus, yielding stress, fracture stress, and fracture energy were decreased and Poisson's ratio and failure strain were increased.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.101-109
• /
• 1995

Axisymmetric and quasi-static finite element analysis of an inflated tire rotating with constant angular velocity and contact to road has been performed. Centrifugal force effect was added to load stiffness matrix and equation of effective material properties were calculated by the Halpin-Tsai formulation. In this report, radial truck/bus tire was analyzed. It was inflated and rotated at speeds up to 140 km/h. Then, contact problem was performed to calculate stress-strain field of tire wiht flat rigid road under the load due to the self-weight of a vehicle. Significant changes of stress-strain field of tire were observed in the finite element analysis. Shear stress, strain and strain energy density were rapidly increased at the dege of #2 belt at freely rotating state. This concentrated stress and strain made belt edge sparation. Under the condition of flat riged road contact, strain energy density of #2 belt, carcass turn-up part were concentrated and bigger values than only freely rotation state. Therefore, dynamic behaivor of tire has to considered as design factors which are affected to belt edge separation and bead breakage.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.9-17
• /
• 2010

본 논문은 $20^{\circ}$ 각도의 굽힘과 50 ${\mu}m$ 인장조건에서 PGA (Pin Grid Array) 패키지의 lead pin에 발생하는 von Mises 응력과 전 변형률 에너지 밀도를 lead pin 소재의 열처리 온도 조건에 따라 유한요소법을 이용하여 해석하였다. 해석결과에 따르면 lead pin의 코너부와 리드핀의 헤드부와 솔더의 경계면이 국부적으로 응력이 집중되는 가장 취약한 위치이며 lead pin의 열처리 온도가 높을수록 발생하는 최대 응력과 변형률 에너지 밀도가 낮아져서 신뢰성이 우수한 것으로 판단된다. 또한 lead pin의 코너부에 라운드가공을 하면 헤드부와 솔더의 경계면에서 발생하는 von Mises 응력과 전변형률 에너지 밀도가 감소하였다. 이와 같은 해석결과는 전 변형률 에너지 밀도가 증가할수록 솔더의 피로수명이 감소하는 연구결과에 미루어볼 때 열처리를 통해 리드핀의 기계적특성을 변경하면 PGA 패키지의 신뢰성을 향상시킬 수 있음을 의미한다. 따라서, 리드핀의 형상최적화와 열처리를 통한 최적화된 소재특성을 통해 PGA 패키지의 신뢰성 향상이 요구된다.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.22-26
• /
• 2009

본 논문은 여러 가지 주름댐퍼를 갖는 안전헬멧의 변형거동 및 변형율 에너지 특성을 유한요소법으로 해석하였다. 안전헬멧은 외부의 충격력을 차단하고, 충격에너지를 흡수하는 것으로 감쇠효과 기능을 갖고 있다. 주름댐퍼를 갖는 3가지의 헬멧모델은 헬멧의 정상부에 최대의 충격력을 가하였을 때 변위량과 변형율 에너지 특성치를 상호간에 비교하였다. 계산한 FEM 해석결과에 의하면, 외부로 돌출한 주름댐퍼는 헬멧의 감쇠효과를 증가시키는 기여도가 높다는 것이다. 본 연구에서 둥근형상의 주름댐퍼는 전달되는 충격에너지를 효과적으로 흡수할 것이라는 사실이다. 따라서 안전헬멧의 하단부에 둥글고 기다랗게 주름댐퍼를 설치한 헬멧을 새로운 설계인자로 고려할 것을 추천한다.