• Korean journal of applied entomology
• /
• v.26 no.3 s.72
• /
• pp.165-170
• /
• 1987

This experiment was carried out to evaluate the difference in the biochemical characteristic of the brown planthoppers of the insecticide risistant, susceptible strains and their hybrid progenies. Activity of the esterase isozyme separated by electrophoresis method was remarkably high in the resistant strain as compared with the susceptible strain. Esterase activity between the insecticide-treated strains and the non-insecticide strains was not degraded in the resistant strain and the $F_1$, but remarkably degraded in the susceptible strain. The increase of esterase activity was associated with the development of resistance, and that was inherited with a dominant gene.

• Parasites, Hosts and Diseases
• /
• v.22 no.2
• /
• pp.153-160
• /
• 1984

An experimental study was undertaken to observe the difference in susceptibility of mouse strains to Metagonimus yokogawai infection by estimating it from worm recovery rate and dimension of worms. It was also studied the effects of prednisolone injection on the chronological pattern of worm recovery in ICR mice. The metacercariae were obtained from sweetfish and 300 in each number were given to 5 strains (CBH, A, DBA, $C^{57}BL$ and KK) of mice, and after 7 days period, the worms were collected from their intestine. Prednisolone at the dose of 10 mg/kg was injected to ICR mice every other day from 7 days prior to infection until sacrificed at 6 hours to 35th post-infection day. ICR mice infected with M. yokogawai but untreated were used for controls. The success rate in infection of mice ranged 25.0-83. 3% by strains, the worm recovery rate 1. 2-18. 9%, and the average size of worms O. 554-0. 683 mm long and 0.214-0.244 mm wide. The higher rates and larger size of worms were observed in KK and $C^{57}BL$ strains than others and the difference was statistically significant. In ICR mice for control, the worm recovery rate until 1 day after infection was relatively high (38-66%) but it became much lower (less than 0.7%) during 1-35 days. However, prednisolone injection brought about persistently high recovery rates (16-80%) until 21 days. It was concluded that the susceptibility to M. yokogawai infection is different by strains of mice but it can be elevated by prednisolone injection probably due to suppression of Immune respon3e3 in ICR mice.

• KSBB Journal
• /
• v.28 no.1
• /
• pp.60-64
• /
• 2013

Two strains were isolated from the traditional Deep Blue Sediment Dye of Polygoum tinctoria, Niram, and temporarily named Niram A and Niram B, respectively. The phylogenetic analysis revealed that strain Niram A and B were closely related to the members of the genus Comamonas and Microbacterium, respectively. Strain Niram A exhibited the highest 16S rRNA gene sequence similarity to C. aquatica LMG $2370^T$ (98.06%). Strain Niram B showed 100% homology with M. oxydans DSM 20578T and M. maritypicum DSM $12512^T$. The growth of the strain Niram A and B was not inhibited in Niram medium containing high calcium concentration without free sugar as carbon source. The reducing Niram is greenish. Therefore, the reducing ability on the Niram of the strains Niram A and B were determined with the color difference of the $a^*$ values of Niram fermented-fluids. The $a^*$ value indicates the level of redness (positive value) or greenness (negative value). The green color is increasing towards the negative value. In all samples fermented for 10 days, the $a^*$ values among samples were no significant difference. However, samples fermented for 15 days have an appreciable change. After fermentation for 15 days, the control Niram sample had $-3.96{\pm}0.02$ of the $a^*$ value. On the other hand, the Niram samples fermented with the strain Niram A and B showed $-4.20{\pm}0.02$ of the $a^*$ value and $-7.86{\pm}0.03$ of the $a^*$ value, respectively. In the reducing ability on the Niram, the strain Niram B was significantly better than the strain Niram A.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.481-490
• /
• 2005

The aim of this study was to investigate the relationship between the C-factor and shrinkage strain values of composite resin and examine the strain values in different incremental filling techniques. The strain gauge method was used for measurement of polymerization shrinkge strain. Experiment was divided two step. In a first experiment, we compared with strain value in three different depth (2mm, 3mm, 4mm) and microhardness of each samples after 24hours were measured. In a second experiment, we examined the strain values in five different filling techniques(Group 1: bulk filling, Group 2: oblique incremental filling, Group 3: horizontal incremental filling, Group 4: vertical incremental filling, Group 5: lining of flowable resin and bulk filling) The results of the present study can be summarized as follows: 1. Composite resin in acrylic molds showed the initial expansion at the early phase of polymerization. 2. Contraction stress was not revealed significant difference between depth of 2mm and 3mm(P>0.05). 3. Contraction stress in sample of 4mm was showed the lowest value(P<0.05). 4. Microhardness of specimen was revealed more difference between upper and lower surface in depth of 4mm than 2 and 3mm(P<0.05). 5. Lining of flowable resin and bulk filling (Group 5) was showed the lowest contraction stress, Group 2 and 3 was showed the highest contraction stress(P<0.05). On the basis above results, the stress that result from the polymerization shrinkage, when incremental curing techniques are used, showed that there is no advantage in incremental placement and curing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2056-2061
• /
• 2001

Non-proportional loading tests of Nylon 66 at room temperature exhibit path dependent behavior and plasticity-relaxation interactions. The uniaxial formulation of the viscoplasticity theory based on overstress (VBO), which has been used to reproduce the nonlinear strain rate sensitivity, relaxation, significant recovery and cyclic softening behaviors of Nylon 66, is extended to three-dimensions to predict the response in strain-controlled, comer-path tests. VBO consists of a flow law that is easily written for either the stress or the strain as the independent variable. The flow law depends on the overstress, the difference between the stress and the equilibrium stress that is a state variable in VBO. The evolution law of the equilibrium stress in turn contains two additional state variables, the kinematic stress and the isotropic stress. The simulations show that the constitutive model is competent at modeling the deformation behavior of Nylon 66 and other solid polymers.

• Transactions of Materials Processing
• /
• v.12 no.1
• /
• pp.43-48
• /
• 2003

The strain state during the continuous confined strip shearing (CCSS) based on ECAP was tackled by means of a two-dimensional FEM analysis. The deformation of AA 1100 sheet in the CCSS apparatus was composed of three distinct processes of rolling, bending and shearing. The pronounced difference in the friction conditions on the upper and lower roll surfaces led to the different variation of the strain component ${epsilon}_13$ throughout the thickness of the aluminum sheet. Strain accompanying bending was negligible because of a large radius of curvature. The shear deformation was concentrated at the corner of the CCSSchannel where the abrupt change in the direction of material flow occurred. The process variables involving the CCSS-die design and frictions between tools and strip influenced the evolution of shear strains during CCSS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.247-250
• /
• 1995

The development and empirical validation of a mathematical model for predicting the depth of deformed layer in a machined surface are presented. The main assumption for develioping this model is that there is a linear relationship between plastic strain and the depth to which it extends. The model relates the work required to shear the workpice material to the work needed to compress the workpiece material ahead of the cutting tool. The results show that the percent difference between the calculated and the measured depth of deformed layer ranges form 4 percent to 19 percent. An improvement of the model is suggested through application of actual distribution data of plastic strain.

• Geomechanics and Engineering
• /
• v.3 no.4
• /
• pp.323-337
• /
• 2011

Israel's coastal region consists, mainly, of Pleistocene and Holocene sands with varying degrees of calcareous cementation, known locally as "kurkar". Previous studies of these materials emphasized the difficulty in their geotechnical characterization, due to their extreme variability. Consequently, it is difficult to estimate construction stability, displacements and deformations on, or within these soils. It is suggested that SPT and Menard pressuremeter tests may be used to characterize the properties of these materials. Values of elastic modulus obtained from pressuremeter tests may be used for displacement analyses at different strain levels, while accounting for the geometric dimensions (length/diameter ratio) of the test probe. A relationship was obtained between pressuremeter modulus and SPT blow count, consistent with published data for footing settlements on granular soils. Cohesion values, for a known friction angle, are estimated, by comparing field pressuremeter curves to curves from numerical (finite element or finite difference) analyses. The material analyzed in the paper is shown to be strain-softening, with the initial cohesion degrading to zero on development of plastic shear strains.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

This paper presents both experimental and numerical investigation of the combustion characteristics of stretched premixed lift-off flames using synthetic gas($H_2$/CO) in an impinging burner. We used "Spin code" for numerical analysis. An ICCD camera was employed to measure flame location and flame thickness. The impinging surface temperature was affected by local strain rate K, equivalence ratio, and composition ratio of fuel. In spite of the difference of boundary conditions in experimental and numerical results, the tendencies of surface temperatures were agreed. From result of this work, we also found that flame location and flame thickness directly related to surface temperature are greatly affected by local strain rate K.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1011-1015
• /
• 2003

The objectives of this work focus on the differences in responses of paired tendons from different anatomical locations. Tendon specimens were obtained from the hindlimbs of canines and frozen to -70$^{\circ}C$. After being thawed, specimens were mounted in the immersion bath, preloaded to 0.13N, and then subjected to 3% or 4% of the initial length at a strain rate of 5%/sec. It was found that the mechanical responses of anatomically paired tendons were nearly the same within each pair but different between pairs of tendons from different anatomical locations. Although flexor tendons had much larger cross-sectional area than the others, such as peroneus or extensor tendons, the stiffness of the flexor tendons were much lower than the others throughout their stress-strain responses. The nature and causes of these differences in the stiffness are not fully known. However, it is clear that differences in the mechanical response of tendons and other connective tissues are significant to the musculoskeletal performance.