• Korean journal of applied entomology
• /
• v.25 no.2 s.67
• /
• pp.99-105
• /
• 1986

The green peach aphids(Myzus persicae) collected in a field had been successively selected by acephate(O, S-dimethyl N-acetyl phosphoroamidothioate) in the laboratory. The selected aphid strain in the 20th generation demonstrated relatively high resistance to acephate as well as relatively high cross-resistance to cypermethrin and oxydemeton-methyl, except pirimicarb. The different esterase isozymes with the strains were detected by the agarose gel electrophoresis and among the isozymes the band of ${\beta}-2$ was only specific for the acephate resistant strains.

• KSBB Journal
• /
• v.24 no.2
• /
• pp.182-188
• /
• 2009

Lactobacillus spp., primary members of probiotics, have significant benefits for health and well-being of human. In this study Lactobacillus strains representing six species (L. paracasei KLB58, L. fermentum MS79 and KLB282, L. plantarum KLB213, L. gasseri KLB238, and L. reuteri KLB270) isolated from Korean adults were electrotransformed with plasmid pNCKH104. To determine optimal electrotransformation conditions, various conditions including cell wall weakening agent, electroporation buffer, electric field strength and time constant were tested for each strain. Overall, high transformation efficiency of approximately 2.5 ${\times}$ $10^3$ ${\sim}$ 5.5 ${\times}$ $10^4$ CFU/${\mu}g$ DNA was obtained where conditions of 0.5 M sucrose electroporation buffer, 1.8 kV pulse voltage and 5 ms time constant were applied. The common conditions developed in this study will make transformation of various Lactobacillus spp. easier than previous procedures.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.63-68
• /
• 2019

Dielectric and piezoelectric properties of PIN-PMN-PT piezoelectric single crystals with variation of temperature and compressive stress were investigated. The crystal phase of the single crystal was changed from the ferroelectric rhombohedral structure to tetragonal structure in the 110℃ region and from the tetragonal structure to the paraelectric cubic structure in the 190℃ region. The piezoelectric constant and relative dielectric constant were calculated from the rate of change of polarization and displacement with the application of electric field, which was similar to the value measured from the instrument. As the compressive stress applied to the sample increased, the piezoelectric constant d₃₃ and relative dielectric constant values tended to increase. When the compressive stress applied to the sample at 5℃ was 60 MPa, the d₃₃ was calculated as 4,500 pC/N. At 60℃, the relative dielectric constant of 62000 was calculated when the compressive stress applied to the sample was 40 MPa. The increase in piezoelectric constant and relative dielectric constant when the compressive stress increased could be attributed to the phase transition from the rhombohedral structure to orthorhombic.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2011

The advanced geotechnical information has been required to determine the accurate design parameters for complex construction. However, the Standard Penetration Test (SPT), which has low reliability, has been used to estimate the subsurface condition in the field. The objective of this paper is development and application of the Static-Dynamic penetrometer, which detects the resistances in soft clay, sand and rock. The energy losses according to the rod connection methods (perfect or non-perfect connection, and number rods) are experimentally evaluated. The reflection and transmission ratios are used to investigate the energy loss by a simulation. The static-dynamic cone penetrometer, in which the accelerometers and strain gauges are installed on the cone tip and the rod head, is used to estimate the energy loss during penetration by impacts. The experimental and simulation studies show that the transferred energy through rods with non-perfect connection dramatically decreases. Furthermore, the transferred energy on the rod head is not the same as that on the cone tip. This study demonstrates that the energy loss should be evaluated on the cone tip.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.16-23
• /
• 2018

In this study, Polydimethylsiloxane (PDMS) was applied to Strain Hardening Cement Composites (SHCC) for penetrating water repellency. The penetration depth of PDMS, strength of SHCC, and chloride ion penetration resistance of SHCC were investigated. As a result of measuring penetration depth of PDMS when applying different application method, it was confirmed that all methods satisfied the requirements of KS F 4930. Although the immersion method showed the largest penetration depth, the spray method was considered to be more appropriate considering the ease of field application. Compressive strength tests showed that the penetration depth of PDMS decreased as the compressive strength of SHCC increased. The compressive strength of M4-A and M4-B specimens with large PDMS penetration depths decreased by 9.6% and 8.0%, respectively, compared with those of M4 specimens produced without PDMS. Compressive strengths of the M1-A and M1-B specimens with small PDMS penetration depths were reduced by 4% and 2.2%, respectively, compared with the M1 specimen. As a result, it can be seen that the strength reduction rate of SHCC increases as the penetration depth of PDMS increases. The chlorine ion penetration tests showed that the chlorine ion penetration resistance increases with the penetration depth of PDMS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.198-206
• /
• 1981

A field research was conducted to evaluate the effects of inoculation of Rhizobium meliloti and lime application on the early growth of alfalfa, var. Luna, in an acid soil. Alfalfa seeds were inoculated by lime-peat pelleting method with $A_3$ strain isolated from alfalfa roots. Both inoculated and noninoculated seeds were sown in acid soil (pH 5.5) with three levels of lime application (1, 3, 6 ton/ha) on mid-April. Inoculated seeds produced many effective nodules in early stage and increased nitrogen and chlorophyll contents of leaf, consequently stimulating alfalfa growth. Pseudo nodules were found in noninoculated, while they were seldom formed in inoculated. Lime application increased soil pH, plant height, root length, and shoot and root weight. Liming effect on nodulation was significant at first cut, but no longer after then. Both inoculation and liming increased the forage yield of alfalfa. Inoculation and liming of 6 ton/ha together produced the highest yield. As compared to control plot of nitrogen application, the effect of seed inoculation only could be equal to about 120 kg/ha nitrogen application. The total nitrogen contents of forage were little affected by number or weight of nodules and amounts of lime application.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.62-66
• /
• 2001

The thirteen commercial insecticides to Lycoriella mali were investigated on their insecticidal activities and mycelial growth of two Letinula edodes strains. For the adults, insecticides showing over 95% insecticidal activity were chlorpyrifos-methyl, fenthion, fenitrothion, benfuracarb, furathiocarb and deltamethrin. For tile larvae, diflubenzuron and cyromazine showed over 90% insecticidal activity. Fenthion, benfuracarb, furathiocarb, deltamethrin, diflubenzuron and cyromazine did not affect the mycelial growth of L. edodes strain, in Imhyup 1 variety. And deltamethrin, diflubenzuron and cyromazine did not affect that in Sanlim-5. Insecticides showing over 80% residual effect for 14 days were benfuracarb to the adults and diflubenzuron and cyromazine to the larvae. Control effect of furathiocarb, fenthion, benfuracarb, deltamethrin, diflubenzuron and cyromazine against larvae of Lycoriella mali showed 90% ten days after application under sawdust cultivation. Among them, benfuracarb, fenthion and furathiocarb revealed excellent control effect against adults. These results indicate that benfuracarb, fenthion, and furathiocarb can be used for the control of Lycoriella mali in the field. However, further studies are needed on the effect of insecticides treatment oil fruit-body yield and chemical residue in the mushroom tissues.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.4
• /
• pp.483-491
• /
• 2008

There has been much focus on the strong axis steel moment connections after the Northridge earthquake in 1994. However, research studieson the seismic behavior of weak axis moment connections could be hardly found despite the fact that these connection details have been frequently used as seismic details of MRF in Korea. Therefore, the objective of this research is to provide better knowledge on the seismic behavior of weak-axis steel moment connections, which can be widely applicable to many structures with similar characteristics. For this purpose, an experimental program was designed and performed with twotypes of weak-axis steel moment connections, namely the bracket type and WUF-B type, based on the survey of existing field data and literatures. Using the experimental results obtained from the quasi-static cyclic testing of these specimens, structural performances of the joints such as hysteretic curves, maximum strength capacities and the strain of reinforced bars were investigated. From the test results, the bracket-type connection was shown to have more than a 5% story drift capacity, compared with the WUF-B type connection's 4%. These specimens were also shown to have higher strength capacities than the nominal design strength. The bracket-type connection showed a slow strength degradation after maximum strength was researched. However,the WUF-B type connection showed a rapid strength degradation that caused brittle behavior.

• Journal of Microbiology
• /
• v.43 no.5
• /
• pp.430-436
• /
• 2005

In this study, the prevalence and quantity of a latent pseudorabies virus (PrV) infection in the nervous tissues of randomly selected pigs was determined via nested and real-time PCR. The nervous tissues, including the trigeminal ganglion (TG), olfactory bulb (OB), and brain stem (BS), were collected from the heads of 40 randomly selected pigs. The majority of the nervous tissues from the selected pigs evidenced a positively amplified band on nested PCR. In particular, nested PCR targeted to the PrV glycoprotein B (gB) gene yielded positive results in all of the BS samples. Nested PCR for either the gE or gG gene produced positive bands in a less number of nervous tissues ($57.5\%$ and $42.5\%$, respectively). Real-time PCR revealed that the examined tissues harbored large copy numbers of latent PrV DNA, ranging between $10^{0.1}\;and\;10^{7.2}(1-1.58{\times}10^7)$ copies per $1{\mu}g$ of genomic DNA. Real-time PCR targeted to the PrV gE gene exhibited an accumulated fluorescence of reporter dye at levels above threshold, thereby indicating a higher prevalence than was observed on the nested PCR ($100\%$ for BS, $92\%$ for OB, and $85\%$ for TG). These results indicate that a large number of farm-grown pigs are latently infected with a field PrV strain with a variety of copy numbers. This result is similar to what was found in association with the human herpes virus.