• Title/Summary/Keyword: Straight way

Search Result 162, Processing Time 0.033 seconds

MEASUREMENT OF FLOW DISTRIBUTION IN A STRAIGHT DUCT OF RAILWAY TUNNEL MOCK-UP USING PIV AND COMPARISON WITH NUMERICAL SIMULATION (PIV 기법을 이용한 모형철도터널 직관덕트에서 유동 분포 계측 및 수치해석 결과와의 비교분석)

  • Jang, Y.J.;Jung, W.S.;Park, I.S.
    • Journal of computational fluids engineering
    • /
    • v.15 no.3
    • /
    • pp.39-45
    • /
    • 2010
  • The turbulent flows in a tunnel mock-up($10L{\times}0.5W{\times}0.25H$ m3 : scale reduction 1/20) with rectangular cross section were investigated. The instantaneous velocity fields of Re = 49,029, 89,571 were measured by the 2-D PIV system which is consisted of double pulsed Nd:Yag laser and the tracer particles in the straight-duct mock-up where the flows were fully developed. The mean velocity profiles were taken from the ensemble averages of 1,000 instantaneous velocity fields. Simultaneously, numerical simulations(RANS) were performed to compare with experimental data using STREAM code. Non-linear eddy viscosity model (NLEVM : Abe-Jang-Leschziner Eddy Viscosity Model) was employed to resolve the turbulent flows in the duct. The calculated mean velocity profiles were well compared with PIV results. In the log-law profiles, the experimental data were in good agreement with numerical simulations all the way to the wake region except the viscous sub-layer (near wall region).

A Study on the Fatigue Life of Autofrettaged Compound Cylinder (자긴가공된 이중후육실린더의 피로수명에 관한 연구)

  • Lee, Eun-Yup;Lee, Young-Shin;Yang, Qui-Ming;Kim, Jae-Hoon;Cha, Ki-Up;Hong, Suk-Kyun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.33 no.4
    • /
    • pp.296-309
    • /
    • 2009
  • Thick-walled cylinder with high pressure have had wide application in the armament industry. In the thick-walled cylinder, fatigue crack is generated at inner radius and developed toward the outer radius. To prevent generation of fatigue crack, the autofrettage process had been used. The compressive residual stress induced by the autofrettage process extends loading pressure and fatigue life of the thick-walled cylinder. In this study, the residual stress of single and compound cylinder by the autofrettage process was evaluated. The analytical compressive residual stress of single cylinder was good agreement with experimental result at inner radius. The analysis on the residual stress of compound cylinder was conducted. The compressive residual stress at inner radius was increased with the overstrain level. And fatigue life of the compound cylinder with initial crack was evaluated. The considered initial crack shape was straight and semi-elliptical. The fatigue life was extended with the overstrain level. The fatigue life of the compound cylinder with semi-elliptical crack was longer than straight crack. The suitable way to extend fatigue life of the compound cylinder was proposed.

Comparison of the Characteristics of Chanel Style between Modern and Postmodern Period (모던 시대와 포스트모던 시대의 샤넬 스타일 특성 비교)

  • Park, Sook-Hyun;Lee, Kwan-Yi
    • Korean Journal of Human Ecology
    • /
    • v.13 no.1
    • /
    • pp.159-171
    • /
    • 2004
  • The purpose of this study was to compare the characteristic of Chanel style between modern and postmodern period. The documentary research method was used for this study. The modem period was limited from around 1920 through 1939 and the postmodern period from 1990 through present for this research. The results were summarized as follows: The characteristics of clothing style in modem period were 1) the preference of slim & straight body figure as ideal one and slim & straight clothing silhouette, 2) the high fashion image for the elite by simple & basic design, 3) the emphasis on the harmony by the unity, 4) the tendency of eliminating ornaments on clothing, 5) the discontinuation of traditional way of dress code & style, and 6) the modern style. The characteristics of clothing style in postmodern period were 1) the emphasis on erotic aspects of female body and sexy design, 2) the popularization of high fashion and certain social group's fashion, 3) the tendency of harmony by mix-match, 4) the preference of ornaments in clothing, 5) the preference of retro-fashion, and 6) the continuation of modem style.

  • PDF

A STUDY OF INSERTION DEPTH OF BUCHANAN PLUGGER AFTER SHAPING USING NI-TI ROTARY FILES IN SIMULATED RESIN ROOT CANALS (Simulated resin root canal에서 엔진 구동형 Ni-Ti 파일로 근관성형 후 Buchanan plugger의 근관 내 삽입깊이에 대한 비교 연구)

  • Park, Youn-Sik;Kim, Dong-Jun;Hwang, Yun-Chan;Hwang, In-Nam;Oh, Won-Mann
    • Restorative Dentistry and Endodontics
    • /
    • v.31 no.2
    • /
    • pp.125-132
    • /
    • 2006
  • This study was conducted to evaluate the insertion depth of Buchanan plugger after shaping by various Ni-Ti rotary files. It was conducted to determine which size of plugger are appropriate, when root canals are shaped with Ni-Ti rotary files and obturated by Continuous wave of condensation technique. Two type of eighty simulated resin blocks were used : J-shaped and straight shaped canal. The simulated canals were instrumented by ProTaper and ProFile. Buchanan pluggers were inserted into the canal, and then the image was recorded to scanner. The distance from the apex of the canal to the plugger tip was measured by image analysis program. Data were analyzed by one-way ANOVA followed by Scheffe's test. The results were as follows 1. In straight canal finished up to ProTaper F2 and F3 file, F and FM pluggers were inserted more than 5 mm short of working length. 2. In J-shaped canal finished up to ProTaper F2 file, F pluggers were inserted more than 5 mm short of working length. Finished up to ProTaper F3 file. F and FM pluggers were inserted more than 5 mm short of working length. 3. In straight and J-shaped canal finished up to ProFile .06/#20 and .06/#25, any of Buchanan plugger could not be inserted more than 5 mm short of working length. These results suggest that canals shaped by ProTaper could be obturated by Continuous wave of condensation technique with F and FM size Buchanan plugger.

A Comparative Study on the Sewing Teaching of 'Tight Skirts' in Teaching Materials of Clothes Configuration (의복구성 교재에 나타난 타이트스커트 봉제 방법에 관한 비교 연구)

  • Kim, Sun-Young;Choi, Young-Soon
    • Journal of the Korean Society of Costume
    • /
    • v.56 no.8 s.108
    • /
    • pp.113-122
    • /
    • 2006
  • In this study, about forty teaching materials have been analyzed in order to examine tight skirt sewing methodtreated in basic process in a college and a fashion related educational institution. The study objects limited with a belt, back centered zipper, and back double slits on a tight skirt, and used fifteen suitable teaching materials in this study. The first study result appeared that every single teaching material suggested the different way of wick adhesion which is used in zipper slit, back slit, and belt part when the skit has been manufactured in order to do a form of clothes well. Secondly, it is the case of a back slit part used for the purpose of both functionality of action and decoration, and it is the section which varies a sewing and cutting way according to seam room width of a back middle seam. However, the majority of teaching materials appeared by being selecting the way how it had cut an inseam of the back center by the both upper part of back slit. Finally, the result showed that it mentioned mainly only both sided zipper sewing method if it seems to be easy to treat the majority in a basic process even though use of a console zipper Is general on a zipper sowing way recently for several years. Also, two forms are used in the belt manufacturing, and they are based with a waist line. However, the teaching materials that were used in this study presented only a manufacture way of the straight line on the waist belt.

Shaping Ability of Four Rotary Nickel-Titanium Instruments to Prepare Root Canal at Danger Zone (네 가지 전동 Ni-Ti 파일의 danger zone에서의 근관성형력)

  • Choi, Seok-Dong;Jin, Myoung-Uk;Kim, Ki-Ok;Kim, Sung-Kyo
    • Restorative Dentistry and Endodontics
    • /
    • v.29 no.5
    • /
    • pp.446-453
    • /
    • 2004
  • The aim of this study was to evaluate the shaping abilities of four different rotary nickel-titanium instruments with anticurvature motion to prepare root canal at danger zone by measuring the change of dentin thickness in order to have techniques of safe preparation of canals with nickel-titanium files. Mesiobuccal and mesiolingual canals of forty mesial roots of extracted human lower molars were instrumented using the crown-down technique with ProFile, $GT^{TM}$ Rotary file, Quantec file and $ProTaper^{TM}$. In each root, one canal was prepared with a straight up-and-down motion and the other canal was with an anticurvature motion. Canals were instrumented until apical foramens were up to size of 30 by one operator. The muffle system was used to evaluate the root canal preparation. After superimposing the pre- and post-instrumentation canal. change in root dentin thickness was measured at the inner and outer sides of the canal at 1. 3, and 5 mm levels from the furcation. Data were analyzed using two-way ANOVA. Root dentin thickness at danger zone was significantly thinner than that at safe zone at all levels (p < 0.05). There was no significant difference in the change of root dentin thickness between the straight up-and-down and the anticurvature motions at both danger and safe zones in all groups (p > 0.05). ProTaper removed significantly more dentin than other files especially at furcal 3 mm level of danger and safe zones (p < 0.05) Therefore, it was concluded that anticurvature motion with nickel-titanium rotary instruments does not seem to be effective in danger zone of lower molars.

Study on Geometric Figures on Body -Body Art- (신체에 표현된 기하학적 형태에 관한 연구 -바디아트 중심으로-)

  • 임미연
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.5 no.2
    • /
    • pp.75-91
    • /
    • 2003
  • This study analyzed descriptions about dots, lines, and sides which are used as a basic elements to express geometric figures as followings: -In the aspect of formative art, dots form images and feelings through their concurrence when make a slight move to coordinates. The concurrence can bring out either positive or negative images; -Lines have unlimited variation as a core measure in body art. They can make optimal effects with different lines such as straight and curved lines of human body; -Sides express not only effects of texture and perspective but also of space and solid by color effects. Expressive characteristics and geometric shapes can be classified by tattoo, henna and body painting: First, colorful tattoos are favored by Caucasian and original tattoos are mostly used by yellow and colored races in the way of scarification to get decorative effects. Recently, a rapid cycle of fashion change in tattoo figures has developed a tentative method of tattooing and a variety of decoration methods. It has made it a lot easier to change a pattern of a tattoo. Tattoos are now popular among people because they no longer have to suffer from pains when they get their body tattooed for a long time. Since tattoos boast their unique beauty which consists of most dynamic and attractive images among the types of body art. It will be one of the most favored make-up methods in the nearest future. Second, geometric designs used in henna include crosses, dots, straight lines, triangles, date palms, and so on. Henna has been particularly loved as an instant decoration by the public since it gradually disappears as time goes on. Third, body painting enables to draw a three-dimensional effect because of its close relation with body movements in a limited space. Each individual will have a different feeling appealed in their body painting. Body painting has been applied to many different areas, especially to theatrical art using lights, music and performance altogether producing impromptu and experimental works. Unlike other arts such as painting, sculpture, visual and industrial arts, body painting has mobility. Since it is painted on a three-dimensional human body, it can bear originality expressing realistic objects or animals and strengthen creative functions using body lines. Moreover, geometric designs can be diversified by the sexes. As a result of analysis, geometric designs expressed in body art seemed to transcend expressions of beauty and turned out to be another way of decoration. Body art has also been used as a way to express visual integration and consolidation dynamically not by human instinct but by social changes. The needs for body art will grow as the future comes nearer and be recognized as a new and fresh value. Formative elements of geometric figures deliver visual impressions combined with human body and finally create more various types of body art in harmony of body lines.

  • PDF

BIM Based Extension of Curved Member Prototypes in Korean Traditional Buildings (BIM에 기반한 한국전통건축 원형의 곡형부재 응용)

  • Park, Soo-Hoon
    • Korean Journal of Computational Design and Engineering
    • /
    • v.17 no.6
    • /
    • pp.426-435
    • /
    • 2012
  • This paper starts with an approach to Korean traditional building design using BIM tool as a design methodology where Korean traditional buildings show some difference rather as weaknesses in handling curves and curved members and the construction. BIM design tools, that are adequate in treating modern architectural design vocabularies, show some disadvantages not having necessary elements and components as building libraries. In this paper we build our own libraries adequate to the proper assembling way of Korean traditional buildings. In contrast to the diverse use of straight building members, Korean traditional buildings show rare use of curves and/or curved members in their assemblage. Moreover, in the case of a circular plan, mostly a circle is interpreted in terms of polygons such as square, hexagon or octagon. In this paper, we examine Gwanram-Jung in Changduk Palace, which is probably the only example in Korea showing a use of curves and/or curved members in assemblage. We try to interpret the case as an incomplete prototype and apply in a modern way to complete a circular plan in terms of circular arcade.

A New Cryptographic Algorithm for Safe Route Transversal of Data in Smart Cities using Rubik Cube

  • Chhabra, Arpit;Singhal, Niraj;Bansal, Manav;Rizvi, Syed Vilayat
    • International Journal of Computer Science & Network Security
    • /
    • v.22 no.8
    • /
    • pp.113-122
    • /
    • 2022
  • At the point when it is check out ourselves, it might track down various information in each turn or part of our lives. Truth be told, information is the new main thrust of our advanced civilization and in this every day, "information-driven" world, security is the significant angle to consider to guarantee dependability and accessibility of our organization frameworks. This paper includes a new cryptographic algorithm for safe route traversal for data of smart cities which is a contemporary, non-hash, non-straight, 3D encryption execution intended for having information securely scrambled in the interim having a subsequent theoretical layer of safety over it. Encryption generally takes an information string and creates encryption keys, which is the way to unscramble as well. In the interim in another strategy, on the off chance that one can sort out the encryption key, there are opportunities to unravel the information scrambled inside the information string. Be that as it may, in this encryption framework, the work over an encryption key (which is created naturally, henceforth no pre-assurance or uncertainty) just as the calculation produces a "state" in a way where characters are directed into the Rubik block design to disregard the information organization.

Effects of Ultrasound on the Flexibility of the Waist after Stretching at the Erector Spinae in Normal Adults (척주세움근의 스트레칭 후 초음파 적용이 정상 성인의 허리 유연성에 미치는 영향)

  • Won-jye Choi
    • The Journal of Korean Academy of Orthopedic Manual Physical Therapy
    • /
    • v.29 no.3
    • /
    • pp.55-61
    • /
    • 2023
  • Background: The purpose of this study was to determine whether applying ultrasound after stretching the erector spinae muscle is an effective method for normal adults as a way to restore reduced back flexibility that causes back pain. Methods: The study was conducted on 60 healthy volunteers divided randomly into four groups (control group, stretching group, ultrasound group, ultrasound after stretching group). The flexibility-promoting effects were determined by assessing, each group, at the time of treatment, pre and post by modified fingertip to-floor (MFTF) and active straight leg raising (ASLR). The data were analyzed using the two-way ANOVA repeated measure with significant level α=.05. Results: Each group showed statistically significant changes in MFTF distance and ASLR degree. In the post-hoc test about this result, the length of MFTF and degree of ASLR in ultrasound after stretching group increased significantly compared to the others. Conclusion: The results suggest that using ultrasound after stretching is far more effective in increasing the flexibility of the erector spinae than using stretching or ultrasound intervention.

  • PDF