• 제목/요약/키워드: Straight type

검색결과 658건 처리시간 0.03초

교정용 미니스크류 임플랜트의 제거회전력 및 골형성에 관한 연굴 (REMOVAL TORQUE AND BONE FORMATION OF ORTHODONTIC MINISCREW IMPLANT)

  • 윤영국;류재준;서규원
    • 대한치과보철학회지
    • /
    • 제45권4호
    • /
    • pp.492-505
    • /
    • 2007
  • Statement of problem: An orthodontic miniscrew implant has been used as a skeletal anchorage for orthodontic treatment. However, any relation among the influence of the cortical bone, morphologic differences of orthodontic miniscrew implants and new bone formation hasn't been made clear yet. Purpose: The purpose of this study was to evaluate whether the orthodontic miniscrew implant could work as an intraoral skeletal anchorage immediately and stably for orthodontic treatment after insertion of it. Material and methods: Two types of orthodontic miniscrew implants were used in this experiment; tapered type and straight type. One hundred and sixty eight orthodontic miniscrew implants were inserted into the tibiae of 21 rabbits and sacrificed on 3, 7, 11, 14, 21 and 28days later after insertion of them to study removal torque values and histologic and histomorphometric analyses. Results: The results were as follows. 1. The removal torque values of the tapered type were higher than those of the straight type in all groups(p<0.05). 2. There wasn't any distinguishing differences between the tapered type and the straight type about the new bone formation percentage. 3. The removal torque values for both the tapered type and the straight type were gradually decreased at early stages of the test but started to increase at the 7 days group of the straight type and the 11 days group of the tapered type. 4. New bone formation percentage was increased gradually for both the tapered and the straight types as time passed(p<0.05). 5. It was found that the tapered type showed lower values in the cortical bone about both the maximum equilibratory stress distribution and the maximum principal stress distribution than the straight type in linear finite elements analysis. Conclusion: According to the research, the removal torque values were decreased at 7 days group of the tapered type and 11 days group of the straight type after the insertion of the orthodontic miniscrew implants in tibiae of rabbits. Considering the human bone activity, it is better to apply the orthodontic force $3{\sim}4$ weeks later than to apply it immediately after the insertion of orthodontic miniscrew implants. Considering that general orthodontic force is about $250{\sim}500$ grams, the tapered type can be worked as a stable skeletal anchor age in an orthodontic treatment even if the orthodontic force is applied on it immediately after the insertion of it.

일체형 곡물 건조/저장 시스템 개발을 위한 Straight Type Sweeping Auger의 이송 특성 분석에 관한 연구 (A Study on the Conveying Characteristic Analysis of Straight Type Sweeping Auger for Development of Combined Grain Drying and Storage System)

  • 최갑용
    • 한국산학기술학회논문지
    • /
    • 제10권3호
    • /
    • pp.521-528
    • /
    • 2009
  • 본 연구는 일체형 곡물 건조/저장 시스템에 채용되고 있는 Straight Type Sweeping Auger에 대한 성능과 적합성 검사를 실험을 통하여 검증하였다. 일체형 곡물 건조/저장 시스템의 핵심 기술은 선입선출을 가능토록 하는 Sweeping Auger의 설계기술에 있다. 바람직한 Sweeping Auger의 설계방향을 제시하기 위하여 Straight Type Sweeping Auger가 곡물 속에서 회전할 때 원주면에서 유동하는 곡물의 거동을 알아보기 위한 실험을 실시하고 결과 분석을 통하여 원인규명을 하였다.

재킷 소매의 심미적 외관을 위한 슬리브헤드의 제품분석 및 외관평가 (Product Analysis and Appearance Evaluation of a Sleeve Head for the Aesthetic Exterior of a Jacket Sleeve)

  • 박영자;장정아
    • 한국의류학회지
    • /
    • 제39권6호
    • /
    • pp.852-866
    • /
    • 2015
  • This study analyzes the form of sleeve heads, which is an important internal element that affects the appearance of jacket sleeves. It characterized sleeve head forms by investigating angles, materials, and a combination of formations for 50 sleeve heads. It conducted an appearance evaluation by comparing and analyzing the results. This paper develops a sleeve head appropriately for sleeve construction. The study results are as follows. First, the product was divided into three parts: based on, force receiving, and sleeve cap parts. There were four types of man's sleeve head: straight, arc, and curve A and B types. The woman's sleeve head had two types: straight and curve B type. Second, the feature of each type of sleeve head was analyzed. A straight type emphasized the based on part. An arc type highlighted the force receiving part while the based on part decreased. The sleeve cap part, force receiving part, and based on part were emphasized in the arc type sleeve head. Third, as a result of the appearance evaluation, each type was rank as straight type < arc type ${\leq}$ curve A < curve B. The straight type did not get positive results as it had extra ease when the sleeve head was attached to a Jacket Sleeve. The arc type was evaluated poorly due to an inappropriate sleeve cap composition. The curve type received an excellent overall outcome as it fit into the sleeve cap part well and highlighted the force receiving part in order to minimize front and back wrinkles. Therefore, the curve type made the resemblance of the jacket appearance perfect and closest to the sleeve pattern.

확산접합 콤팩트 열교환기의 성능에 관한 실험적 연구 (An Experimental Study on the Performance of Diffusion Bonding Heat Exchangers)

  • 권오경;차동안;윤재호
    • 대한기계학회논문집B
    • /
    • 제33권1호
    • /
    • pp.53-59
    • /
    • 2009
  • The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the micro channel heat exchangers using diffusion bonding technology. Four types of heat exchangers are designed and manufactured, which are straight type, long dot type, splited wavy type and straight double side type. Heat transfer and pressure drop performance of each heat exchangers are measured in various operating conditions, and compared each other. The results show that the $(j/f)^{1/3}$ performance of splited wavy type and long dot type increases about 10.3% and 6.1% at the Reynolds number 470 compared to that of straight type, respectively. On the other hand, $(j/f)^{1/3}$ performance of straight double side type decreases 19.7%.

확산접합 콤팩트 열교환기의 성능에 관한 실험적 연구 (An Experimental Study on the Performance of Diffusion Bonding Heat Exchangers)

  • 권오경;차동안;최미진;윤재호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2304-2309
    • /
    • 2008
  • The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the micro channel heat exchangers using diffusion bonding technology. Four types of heat exchangers are designed and manufactured, which are straight type, long dot type, splited wavy type and straight double side type. Heat transfer and pressure drop performance of each heat exchangers are measured in various operating conditions, and compared each other. The results show that the $(j/f)^{1/3}$ performance of splited wavy type and long dot type increases about 10.3% and 6.1% at the Reynolds number 470 compared to that of straight type, respectively. On the other hand, $(j/f)^{1/3}$ performance of straight double side type decreases 19.7%.

  • PDF

길 원형을 위한 상반신의 체형 연구 - 한국 성인 여성을 대상으로 - (A Study on the Somatotype of the Upper Body for the Women's Bodice Pattern)

  • 이순원;남윤자
    • 한국의류학회지
    • /
    • 제15권4호
    • /
    • pp.341-349
    • /
    • 1991
  • This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

  • PDF

의복설계를 위한 성인여성의 頸部 및 肩部의 유형화 II - 체형별.연령층별 변화 분석 - (A Study on the Shapes of Women′s Neck and Shoulder in Dressmaking - According to Body Type and Age Group -)

  • 김희숙
    • 복식문화연구
    • /
    • 제8권5호
    • /
    • pp.754-770
    • /
    • 2000
  • The definite objects of this study are as follows ; 1. The study presents concrete objects of the shape of adult women's neck and shoulder after comparing and analyzing the features of five age groups ; the former young age, the latter young age, the former middle age, the latter middle age, the latter middle age and the old age. 2. The study presents concrete objects of adult women's neck and shoulder by the body types ; bend-forward type, straight type and lean-back type in order to be examined the body types. The results of this study are as follows ; 1. The shape of neck and shoulder needs the several concrete objects of each types because of the variable factors in size and body types. But the concrete objects of the types referred in five age groups contain all the important factors and enable to design the body suitable clothes. 2. This study shows that generally bend-forward type contains rising shoulder and lean-back type contains drooping shoulder, and straight type contains average value of neck and shoulder. The results of this study developed the body-suitable clothes of bend-forward type, straight type and lean-back type.

  • PDF

초.중.고등학교 현상설계 당선안에 나타난 배치 계획 요소 및 경향 분석 (An Analysis on Layout Patterns and their Trends in the Prizewinners of Elementary.Middle.High School Design Competitions)

  • 이정우;김형진
    • 교육시설 논문지
    • /
    • 제19권3호
    • /
    • pp.3-12
    • /
    • 2012
  • Owing to generalization of design competitions since 1990s, various design methods was tried in elementary middle high school design competitions. Therefore, to analyze design characteristics of elementary middle high school is very meaningful. In this context, this study is the most important purpose for analyzing layout plans and their trends in prizewinners of elementary middle high school design competitions and for furnishing basic datum for next school design. The result of this study is following : (1) The layout patterns of school buildings are classified into 12 types. (2) Entrance design is divided into 6 types(structure, column and wall, open, half structure, general, and mixed type). (3) Square design is grouped into 7 types. (4) Pedestrian mall is sorted out 6 types(straight lineal, curve, curve and square, straight lineal and curve, and straight lineal and curve and square type). (5) Entrance types of vehicle and pedestrian are classified into 4 types(parallel, ㅡ separation, ㄱ separation, and opposite separation type) Analysis shows that the best applying for layout patterns of school buildings is ㄷ type and ㅌ type, for entrance design is structure type, for square design is ${\square}$ type and ${\bigcirc}$ type, for pedestrian mall is straight lineal and square type, and for entrance types of vehicle and pedestrian is parallel type.

폭력가정 청소년의 가족폭력 경험에 관한 연구 (A Study on the Adolescent폭s Experiences in Domestic Violence)

  • 김경희
    • 대한간호학회지
    • /
    • 제28권1호
    • /
    • pp.70-80
    • /
    • 1998
  • This study is designed to contribute to the nursing intervention of adolescent domestic violence victims by describing specifically what they go through and on this basis work out a grounded theory on the adolescent's experience in domestic violence. The data were analyzed in the framework of grounded theory as mapped out by Strauss & Corbin(1990). The major findings of this research are as follows : The core category was found to be the the adaptation of "Joyudeum" or “Straight jacketing”. The sub-categories identified in the process of grounded data analysis were 'menacing', 'being harassed', 'being pressed', 'being attacked', 'being strapped', 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard', 'endurance', 'regulation', 'seriousness'. 'repitition'. 'being helpful', 'dependence', 'thinking oriented', 'blowing off', 'going astray', 'self-deprecating', 'shaking off', 'covering up', 'governing', 'being devoted', 'performing', 'being transformed'. 'bolting', 'being shaken', 'withdrawing', 'disliking', 'bitterness'. These categories were again grouped into 13 categories including 'threatening'. 'straight jacketing', 'tolerance', 'violence', 'supporter', 'supporting type', 'thinking oriented'. 'impulsive response', 'self-controlled', 'response', 'self-reliance', 'wandering', 'withdrawal' and pain'. Of these the five sub-categories 'being filled with anger'. 'getting angry', 'being oppressed', 'being strained', 'becoming hard' were grouped into a core category "straight jacketing". Those adolescents brought up in a violent family go through three stages of the adaptation of "straight Jacketing". that is, generation, response and adaptation. The following four theses were confirmed on the basis of repetitive relations : 1) If a subject's tolerance is strong, the episodes of the violence are frequent and serious, with the resulting straight jacketing being stronger but the subject's supporter is highly mature, the supporting type is concrete and the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is self-reliance with part of it resulted in withdrawal and pain. 2) If a subject's tolerance is weak, the episodes of the violence are frequent but not serious, with the resulting straight jacketing being weaker but the subject's supporter is immature, the supporting type is superficial and the thinking oriented is extemporary, the responses to the straight jacketing result in an impulsion whose consequence is wandering with part of it resulted in withdrawal and pain. 3) If a subject's tolerance is weak, the episodes of the violence are frequent and serious, the straight jacketing is strong, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in an impulsion whose consequence is withdrawal and pain with part of it resulted in wandering. 4) If a subject's tolerance is strong and the episodes of the violence are infrequent and not serious, the straight jacketing is weak, the subject's supporter is immature and the supporting type is superficial but the thinking oriented is wishful, the responses to the straight jacketing result in a self-control whose consequence is withdrawal and pain with part of it resulted in self-reliance.

  • PDF

윤축을 적용한 좌·우 주관절 신전 동작의 운동역학적 비교 연구 (Comparative Study of Biomechanical Left and Right Elbow Joint Extension Movements After Wheel Axle Application)

  • 김성주
    • 한국운동역학회지
    • /
    • 제21권4호
    • /
    • pp.429-436
    • /
    • 2011
  • In this study, we have experimented with 9 players at the national delegate level. Although there were some differences in the average effects of 3 types of one-two straight movements after the application of wheel axle, there were no statistical differences in the case of surface reacting forces, electromyograms, and impact forces. When the right fist was impacted using the one-two straight movements and the wheel axle was applied with 3 segmentations, high impact forces were obtained for the pronation in the following order-72.01 $m/s^2$ (type 2), 70.93 $m/s^2$ (type 3), and 58.19 $m/s^2$ (type 1). Higher values of the surface reacting force were found for type 1 that did not exhibit pronation in the left foot, whereas in the case of the vertical direction of the right foot, type 2 with pronation exhibited higher values and impact forces. In the right electromyogram, high impact forces due to the activation of the muscular electric potential were obtained for lumbar erector (LE) spinae and triceps brachii (TB) with type 1; LE spina, latissimus dosi (LD), and upper trapezius (UT) with type 2; and brachioradialis (BR), UT, and rectus abdominal (RA) with type 3. Due to pronation and complex motions of the 3 pronation segmentations, the efficiency was higher for impacts due to one-two straight movements.