• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.919-924
• /
• 2005

Fretting-wear caused by turbulence excitation for KSNP(Korea standard nuclear power plant) steam generator is investigated numerically. Secondary sides density and normal velocity are obtained by the thermal-hydraulic data of the steam generator. Because nonlinear finite element analysis is complex and time consuming, work rate is estimated by using linear analysis for simple straight 2-span tube. Wear volume and depth by using work rate calculation are estimated. Span length, secondary side fluid density and normal velocity are adopted to study the effects on the fretting-wear by turbulence excitation. When secondary sides density and normal velocity is increased, It turns out that secondary side density and normal gap velocity are very important paramater for fretting-wear phenomena of the steam generator.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.75-78
• /
• 2017

We reports improved monitoring performance of Self plasma-optical emission spectroscopy (SP-OES) by augmenting a by-pass tube to a conventional straight (or single) tube type self plasma reactor. SP-OES has been used as a tool for the monitoring of plasma chemistry indirectly in plasma process system. The benefits of SP-OES are low cost and easy installation, but some semiconductor industries who adopted commercialized SP-OES product experiencing less sensitivity and slow sensor response. OH out-gas chemistry monitoring was performed to have a direct comparison of a conventional single type tube and a by-pass type tube, and fluid dynamic simulation on the improved hardware design was also followed. It is observed faster pumping out of OH from the chamber in the by-pass type SP-OES.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.31-38
• /
• 2021

The energy harvesting system using an inverted flag is analyzed by using an immersed boundary method to consider the fluid and solid interaction. The inverted flag flutters at a lower critical velocity than a conventional flag. A fluttering motion is classified into straight, symmetric, asymmetric, biased, and over flapping modes. The optimal energy harvesting efficiency is observed at the biased flapping mode. Using the three different machine learning algorithms, i.e., artificial neural network, random forest, support vector regression, the energy harvesting efficiency is predicted by taking bending rigidity, inclination angle, and flapping frequency as input variables. The R² value of the artificial neural network and random forest algorithms is observed to be more than 0.9.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.273-278
• /
• 2009

월파형 파력발전장치는 월류된 파랑으로 인하여 발생한 수두차를 이용하여 터빈을 구동하는 일종의 파랑에너지 변환장치로써 파랑에너지를 전기 에너지로 변환하는 장치이다. 본 연구는 상용 CFD코드 인 Fluent를 사용하여 수치 조파수조를 구현하여 월파형 파력발전장치의 해석에 도입을 하여 입사파 조건과 형상에 대한 계산을 수행하였다. 최적의 월류성능을 나타내는 구조물 사면형상을 도출하기 위하여 직선형과 포물선형을 채택하여 비교분석을 수행한 결과 포물선형 사면경사를 갖는 구조물이 더 우수한 월류성능을 보인다는 것을 확인 하였다.

• Wind and Structures
• /
• 제26권6호
• /
• pp.369-382
• /
• 2018

Tornadoes are vertical swirling air formed because of the existence of layers of air with contrasting features of temperature, wind flow, moisture, and density. Tornadoes induce completely different wind forces than a straight-line (SL) wind. A suitably designed building for an SL wind may fail when exposed to a tornado-wind of the same wind speed. It is necessary to design buildings that are more resistant to tornadoes. In tornado-damaged areas, dome buildings seem to have less damage. As a dome structure is naturally wind resistant, domes have been used in back yards, as single family homes, as in-law quarters, man caves, game rooms, storm shelters, etc. However, little attention has been paid to the tornadic wind interactions with dome buildings. In this work, the tornado forces on a dome are computed using Computational Fluid Dynamics (CFD) for tornadic and SL wind. Then, the interaction of a tornado with a dome and a prism building are compared and analyzed. This work describes the results of the tornado wind effect on dome and prism buildings. The conclusions drawn from this study are illustrated in visualizations. The tornado force coefficients on a dome building are larger than SL wind forces, about 120% more in x- and y-directions and 280% more in z-direction. The tornado maximum pressure coefficients are also higher than SL wind by 150%. The tornado force coefficients on the prism are larger than the forces on the dome, about 100% more in x- and y-directions, and about 180% more in z-direction. The tornado maximum pressure coefficients on prism also are greater those on dome by 150% more. Hence, a dome building has less tornadic load than a prism because of its aerodynamic shape.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.77-83
• /
• 2016

종래, 직선벽상의 공동에서 발생하는 유동에 대한 많은 연구가 수행되어 왔다. 그러나 실제 공학적 응용에서 빈번하게 접하게 되는 곡선벽상의 공동 유동에 대한 연구는 찾아보기 드물다. 이러한 곡선 벽상에서는 강한 원심력의 효과가 발생하여 공동 유동에 영향을 미치게 되므로, 종래 직선 벽에서 발생하는 공동 유동과는 그 특성이 다를 것으로 예상되나, 이에 대한 구체적인 정보는 알려져 있지 않다. 본 연구에서는 유동의 마하수가 0.4에서 0.8까지의 고아음속 유동조건에서 곡선 벽 위의 공동 유동장을 수치해석적 방법으로 조사하였으며, 공동의 세장비(L/H)는 3.0으로 고정하였으나, 곡면의 곡률반경을 변화시켰다. 그 결과 곡선 벽의 공동에서 발생하는 압력진동이 직선 벽에 비하여 더 크며, 곡면의 곡률반경이 공동내부에서 발생하는 비정상 유동특성에 큰 영향을 미친다는 것을 알았다.

• Wind and Structures
• /
• 제23권2호
• /
• pp.91-107
• /
• 2016

Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.

• 한국정보통신학회논문지
• /
• 제24권12호
• /
• pp.1618-1624
• /
• 2020

X-ray를 기반으로 하는 장 폐색 진단 방법은 검사자의 주관적인 요소가 포함되기 때문에 객관적 진단에 영향을 미칠 수 있다. 따라서 본 논문에서는 허프 변환과 PCM 클러스터링 기법을 적용하여 장폐색 영역을 추출하는 방법을 제안한다. 제안된 방법은 X-ray 장폐색 영상에서 ROI 영역을 추출한 후, 허프 변환 기법을 이용하여 ROI 영역에서 직선을 검출하고, 검출된 직선을 이용하여 공기 액체층의 형태학적 특징을 이용하여 대장 폐색을 추출한다. 그리고 추출된 ROI 영역을 PCM 클러스터링을 적용하여 ROI 영역을 양자화 한다. 양자화된 ROI 영역 중에서 대장 폐색의 특징이 포함된 클러스터의 그룹을 선정하고, 선정된 클러스터의 그룹에서 객체를 탐색하여 소장 장폐색 영역을 추출한다. 장폐색 환자의 X-ray 영상 30개를 대상으로 PCM 클러스터링을 적용한 결과, PCM의 초기 클러스터의 수를 4개로 설정한 경우가 장폐색 검출 성능이 우수하였고 TPR은 81.47%로 나타났다.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.415-421
• /
• 2021

본 연구는 절연 게이트 양극성 트랜지스터 모듈의 히트 싱크의 유로의 형상으로써 직선 유로, 한 번 꺾인 형태의 유로, 두 번 꺾인 형태의 유로를 적용하여, 유로의 형상에 따른 방열 성능을 분석하였다. 각 유로 형상에서 운전 조건에 대한 영향 또한 분석하기 위하여 냉각수의 유량과 공급 온도를 추가적으로 제어하며 분석을 진행하였다. 본 연구는 유동 해석을 통하여 이루어 졌으며, 상용 소프트웨어인 ANSYS Fluent를 사용하였다. 직선 유로보다 꺾인 형태를 갖는 유로의 방열량이 같은 운전 조건에서 최대 8.0 % 수준 개선되었으며, 개선 정도는 냉각수의 공급 온도와는 무관하였고, 냉각수의 유량이 많아질수록 개선 정도가 2.0 %에서 8.0 %까지 증가하였다. 그러나 두 번 꺾인 유로는 한 번 꺾인 유로와 비슷한 수준의 방열 성능을 보였고, 기생 손실에 영향을 주는 압력 강하량은 2.48~2.55배 수준으로 증가하는 결과를 보여, 방열 효율이 낮아지는 것을 확인 하였다. 이를 단위 압력 강하량 당 방열량으로 계산하여 비교하였으며, 직선 유로를 갖는 히트 싱크에서 그 값이 가장 높은 것을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.5-10
• /
• 2013

The regenerative pump is a kind of turbomachine which is capable of developing high pressure rise at relatively lower flow rates compared to the centrifugal and axial pumps. Although the efficiency of regenerative pumps is much lower than other turbomachines, still they have been widely used in many industrial applications for working at low specific speeds. There are some theoretical models to analysis the pump performance, however, the effect of the blade angle on the pump performance has not been covered in any model to date. In the present study, experimental study on the regenerative pump performance according to the impeller blade angle and its shape has been carried out. The straight radial blades with forward, backward and chevron blades which have inclined angles of $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ were tested. The pump performance characteristics as the pressure head, efficiency were obtained depending on the flow rate for every impeller, and their results, expressed in appropriate non-dimensional coefficients, were compared and analysed in detail. From the experimental results, it was found that the pressure head and the efficiency depend strongly on the blade angles as well as the blade type. These experimental data has made it possible to better understand the effects of the blade angle on the pump performance, and widen the applicability of the current performance analysis and design models with including the effect of blade angles.