• 한국분말재료학회지
• /
• 제4권4호
• /
• pp.243-251
• /
• 1997

Engine valve-shaped TiAl-Mn intermetallics containing 43.5 to 47.5at%Al (Mn/Al=0.036) are successively fabricated by reactive sintering the elemental powder mixtures near-net shaped by extrusion and die forging. A duplex structure consisted of lamellar grains and equiaxed $\gamma$ grains is developed for all compositions, and the areal fraction of the lamellar grains(or equiaxed $\gamma$ grains) decreases (or increases) with increasing Al content. As Al content increased, the elongation increases with accompanying decrease in yield strength and ultimate tensile strength at both room temperature and 80$0^{\circ}C$. This indicates that the suitable composition is Ti-45at%Al-1.6at%Mn in considering the balance of ambient and elevated tensile properties. The reactive-sintered Ti-45Al-1.6Mn alloy shows superior oxidation resistance not only to the plasma arc melted one but also to the heat resistance steel STR35(representative exhaust valve head material for automotive engine). The reactive-sintered Ti-45Al-1.6Mn alloy coated with an oxidizing scale exhibits a better wear resistance than induction hardened martensitic steel STR11(representative exhaust valve tip material for automotive engine).

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.17-26
• /
• 2020

It is clear that monocrystalline Silicon (Si) ingots are the key raw material for semiconductors devices. In the present industries markets, most of monocrystalline Silicon (Si) ingots are made by Czochralski Process due to their advantages with low production cost and the big crystal diameters in comparison with other manufacturing process such as Float-Zone technique. However, the disadvantage of Czochralski Process is the presence of impurities such as oxygen or carbon from the quartz and graphite crucible which later will resulted in defects and then lowering the efficiency of Si wafer. The heat transfer plays an important role in the formation of Si ingots. However, the heat transfer generates convection in Si molten state which induces the defects in Si crystal. In this study, a crystal growth simulation software was used to optimize the Si crystal growth process. The furnace and system design were modified. The results showed the melt-crystal interface shape can affect the Si crystal growth rate and defect points. In this study, the defect points and desired interface shape were controlled by specific crystal growth rate condition.

• Journal of Nutrition and Health
• /
• 제23권4호
• /
• pp.257-269
• /
• 1990

We designed this study to compare the total body fat content and its distribution of diabetics with those of normal subjects. Skinfold thicknesses at eight sites(subscapular, subcostal, abdomen, suprailiac, triceps, forearm, thigh and calf) and body circumferences at five sites(waist, hip, arm, thigh and calf) were measured on 220 diabetics(82 male, 138 female) and on 160 nondiabetic subjects(male 57, female 103). We matched 92 pairs with diabetics and nondiabetic control subjects by sex, age, body weight and height, and made comparisons between two groups(case-control study). The results were as follows: 1) There was no significant difference in total body fat content of diabetics and control (male ; 20.40$\pm$2.12%, 19.20$\pm$3.52%, female ; 26.46$\pm$2.53%, 27.01$\pm$2.92%, respectively). However, body muscle mass(%) in diabetic men(33.37$\pm$4.19%) was significantly lower than in nondiabetic men(38.16$\pm$7.11%). 2) Diabetics, especially women, were characterized by more central body fat than control. That is, indices of centrality of body fat distribution(subscapular/triceps skinfold : STR, central/peripheral fat : CPR) of diabetics were higher than those of control. 3) Body weight, body mass index and %IBW(current body weight$\times$100/ideal body weight) had negative correlations with duration of diabetes(r=-0.23~-0.33), but total body fat content(%) and indices of body fat distribution, such as STR, CPR, waist/hip girth ratio(WHR), and waist/thigh girth ratio(WTR), were not related to duration of diabetes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.720-723
• /
• 2005

Ship motion is a complex controlled process with several hydrodynamic parameters that vary in wide ranges with respect to ship load condition, speed and surrounding conditions (such as wind, current, tide, etc.). Therefore, to effectively control ships in a designed track is always an important task for ship masters. This paper presents an effective adaptive autopilot ships that ensure the optimal accuracy, economy and stability characteristics. The PID control methodology is modified and parameters of a PID controller is designed to satisfy conditions for an optimal objective function that comprised by heading error, resistance and drift during changing course, and loss of surge velocity or fuel consumption. Designing of the controller for course changing process is based on the Model Reference Adaptive System (MRAS) control theory, while as designing of the automatic course keeping process is based on the Self Tuning Regulator (STR) control theory. Simulation (using MATLAB software) in various disturbance conditions shows that in comparison with conventional PID autopilots, the designed autopilot has several notable advantages: higher course turning speed, lower swing of ship bow even in strong waves and winds, high accuracy of course keeping, shorter time of rudder actions smaller times of changing rudder direction.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2003년도 하계학술대회논문집
• /
• pp.17-20
• /
• 2003

안전하고 안정적인 그룹통신은 최근 그룹 및 그룹 구성원간의 협조가 필요한 응용 분야가 발전하면서 점차 그 필요성이 대두되고 있다. 이 중 가장 중요한 문제는 그룹내의 키 관리 문제이다. 중앙에 의존하는 키 관리 방식의 경우 대용량의 멀티캐스트 그룹에 어울리는 반면 중앙 센터 없이 구성원간의 협조에 의하여 이루어지는 그룹의 경우 분산키 관리 방법, 즉 그룹키 합의 방법이 필요하다. 기존의 그룹 키 합의 방법들은 계산량의 효율성에 치중한 연구만을 해왔다. 한 가지 예외로 STR 프로토콜［4］은 디피-헬만 프로토콜을 키 트리에 응용하고 키 트리가 한쪽으로 치우친 구조를 가지고 있어 통신량을 최적화하고 있다. 하지만 계산량에 있어서 그룹 멤버의 변경 시 현재 그룹 구성원의 수에 비례한 계산량이 필요하다. 본 논문에서는 pairing을 응용하여 STR 키 합의 방식에 계산량에 있어서 효율성을 제공하고 통신 효율성을 유지하며 그룹키를 인증할 수 있는 방식을 제시한다.

• Genomics & Informatics
• /
• 제6권1호
• /
• pp.14-17
• /
• 2008

GENDISCAN study (Gene Discovery for Complex traits in Asian population of Northeast area) was designed to incorporate methodologies which enhance the power to identify genetic variations underlying complex disorders. Use of population isolates as the target population is a unique feather of this study. However, population isolates may have hidden inbreeding structures which can affect the validity of the study. To understand how this issue may affect results of GENDISCAN, we estimated inbreeding coefficients in two study populations in Mongolia. We analyzed the status of Hardy-Weinberg Equilibrium (HWE), polymorphism information contents (PIC), heterozygosity, allelic diversity, and inbreeding coefficients, using 317 and 1,044 STR (short tandem repeat) markers in Orkhontuul and Dashbalbar populations. HWE assumptions were generally met in most markers (88.6% and 94.2% respectively), and single marker PIC ranged between 0.2 and 0.9. Inbreeding coefficients were estimated to be 0.0023 and 0.0021, which are small enough to assure that conventional genetic analysis would work without any specific modification. We concluded that the population isolates used in GENDISCAN study would not present significant inflation of type I errors from inbreeding effects in its gene discovery analysis.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.317-329
• /
• 1996

Allelic frequency and genotype distribution of short tandem repeat(STR) F13A01 locus was analysed by polymerase chain reaction, polyacrylamide gel electrophoresis and silver staining from human genomic deoxyribonucleic acid(DNA) was extracted from 205 unrelated Korean to be applied to forensic identification and parentage testing as a database. The results were as follows : 1. 5 alleles and 11 genotypes of F13A01 locus were detected and heterozygosity value was 62.0% and the observed each alleles and allelic frequency was 3.2(0.363), 4(0.105), 5(0.063), 6(0.466), 16(0.002). 2. The allelic diversity value was 0.639 and the power of discrimination was 0.804.3. Compared with observed number of alleles and allele frequency in ethnic difference, result was appeared to be similar to that of Japanese and Asians, while was appeared to be much different to that of Blacks and Caucasians in the observed number of alleles and frequency of allele 3.2, 5, 7. From the above result of this investigation, the allelic frequency of STR F13A01 locus in the Korean was considerd to be useful for individual identification and parentage testing as a database.

• Parasites, Hosts and Diseases
• /
• 제52권4호
• /
• pp.383-389
• /
• 2014

Anisakiasis, a human infection of Anisakis L3 larvae, is one of the common foodborne parasitic diseases in Korea. Studies on the identification of anisakid larvae have been performed in the country, but most of them have been focused on morphological identification of the larvae. In this study, we analyzed the molecular characteristics of 174 Anisakis type I larvae collected from 10 species of fish caught in 3 different sea areas in Korea. PCR-RFLP and sequence analyses of rDNA ITS and mtDNA cox1 revealed that the larvae showed interesting distribution patterns depending on fish species and geographical locations. Anisakis pegreffii was predominant in fish from the Yellow Sea and the South Sea. Meanwhile, both A. pegreffii and A. simplex sensu stricto (A. simplex s.str.) larvae were identified in fish from the East Sea, depending on fish species infected. These results suggested that A. pegreffii was primarily distributed in a diverse species of fish in 3 sea areas around Korea, but A. simplex s.str. was dominantly identified in Oncorhynchus spp. in the East Sea.

• 한국동물위생학회지
• /
• 제22권2호
• /
• pp.121-128
• /
• 1999

The present study was conducted to investigate the incidence of pneumonic lesions with special regard to enzootic pneumonia and the microbiology of pneumoic lungs from 544 slaughter pigs during the period from October 1995 to September 1996. The incidence of enzootic pneumonic lesion was 76.3% (41s/s44) and pleurisy was detected from 7.9% of slaughter pigs. Seasonal prevalence of pneumonic lesions in slaughter pigs were in order of prevalence of 82.9% in spring, 76.8% in winter, 74.8% in autumn and 69.0% in summer, respectively. Pasteurella multocida, Streptococcus sp, Str suis, Corynebacterium sp, Actinobacillus pleuropneumoniae, Hemophilus parasuis, and Klebsiella pneumoniae were detected in order of prevalence from 16.9%, 15.9%, 7.5%, 6.0%, 1.4%, 1.0% and 0.5% of 415 pneumonic lungs, respectively. P multocida were susceptible to oxytetracycline, polymyxin-B, streptomycin, and vancomycin, while the majority of them were resistant to amoxicillin, ampicillin, cephalothin, kanamycin, and penicillin-G. Str suis were susceptible to amoxicillin, ampicillin, cephalothin, penicillin-G, although the majority of them were resistant to erythromycin, oxytetracycline, streptomycin, vancomycin. A pleuropneumoniae were susceptible to ampicillin, and cephalothin, but the majority of them were resistant to oxytetracycline.

• 응용통계연구
• /
• 제15권1호
• /
• pp.85-105
• /
• 2002

본 연구에서는 유전자 검사자료에서 각 유전자좌내 및 유전자좌간의 대립형질들간의 관계를 파악하기 위한 탐색적 방법을 고려하였다. 이를 위해 유전자데이터를 재배열한 후 대응분석 및 다중대응분석의 알고리즘을 적용하여 이를 수량화, 그래프화하는 방법 및 대응행렬도를 적용한 방법을 제안하였다 이러 한 수량화 및 그래프 결과가 하디-와인버그 평형검정 및 연관균형검정 결과와 어떤 관계가 있는지 알아보고 실제 한국인 집단에 대한 STR 유전자좌 자료를 이용하여 결과를 비교하였다.