• 제목/요약/키워드: Storm water management model 5

검색결과 54건 처리시간 0.022초

LID 기법 적용에 따른 물순환 효과분석 (Analysis of Water Cycle Effect according to Application of LID Techniques)

  • 이정민;이윤상;최종수
    • 한국습지학회지
    • /
    • 제16권3호
    • /
    • pp.411-421
    • /
    • 2014
  • 지금까지 우리나라는 빗물을 빨리 그리고 많이 집수하여 배수하는 중앙 집중식 빗물관리 방식을 취하면서 도시 환경에 많은 악영향을 미쳐왔다. 이제는 개발 이전의 자연 상태에 최대한 근접하는 빗물 침투와 증발산이 이루어지도록 발생원에서 분산형으로 빗물을 관리하도록 개발할 필요가 있다. 이는 개발로 인한 영향을 최소화하는 저영향개발(LID; Low Impact Development)기법이기도 하다. 이러한 자연 순응형 빗물관리에 따라 개발로 인한 유출량 저감, 열섬 현상 저감 등 기후변화에 대응하는 새로운 도시 조성을 기대해 볼 수 있다. 이에 따라 신도시 개발 지구 등에서 LID 시설의 적용 계획에 따른 물순환 영향 연구 사례가 보고되고 있다. 다만, 단지나 신도시와 같이 대규모 개발 부지에서 LID 시설과 기법을 개발 초기부터 계획, 설계하여 적용한 사례가 거의 없다. 또한, 대규모 개발 사업의 LID 적용 계획에 따른 물순환 복원 효과 예측과 실제 적용 후 물순환 복원 효과를 연구한 사례도 많지 않다. 본 연구에서는 대규모 개발 부지에 계획한 아산 탕정 LID 물순환 시범도시의 물순환 개선 효과를 분석하였다. 이를 통하여 향후 개발에 따른 도시 물순환 회복을 위한 도시 물관리 계획 패러다임의 변화 여부를 검토하고자 한다. 도시 물순환 개선효과 모의는 최근 EPA(United States Environmental Protection Agency, 미국환경보호국)에서 LID 시설을 모의할 수 있도록 개선 개발한 SWMM5 모형을 이용하였다.

SWMM을 이용한 춘천 거두 1지구의 LID 개념 적용으로 인한 유출 감소 특성 분석 (Analysis of Runoff Reduction with LID Adoption using the SWMM)

  • 박준호;유용구;박영곤;윤희택;김종건;박윤식;전지홍;임경재
    • 한국물환경학회지
    • /
    • 제24권6호
    • /
    • pp.806-816
    • /
    • 2008
  • In recent years, increases in impervious areas with rapid urbanization and land use changes are causing numerous hydrologic and environmental problems. In this study Low Impact Development (LID) was applied to investigate changes in runoff and peak runoff with LID plans. SWMM 5.0 was used to simulate LID Integrated Management Practices (IMPs) at study area. The SWMM estimated total runoff volume with conventional land use planning is (82.3%, 46.44 mm), (99%, 73.16 mm) greater than total runoff before urbanization, while total runoff with LID is (11.1%, 46.44 mm), (49%, 73.16 mm) greater than those before urbanization. With the LID adoption in land use planning, pervious area increases by 49.8% compared with that from the conventional urban land use planning, resulting in (32.7%, 46.44 mm), (23.6%, 73.16 mm) decrease in total runoff, and (32.6%, 46.44 mm), (18.5%, 73.16 mm) decreases in peak rate runoff. The results obtained from this study indicate that peak rate runoff, time to peak, and total runoff can be reduced with the LID in urban land use planning because the LID secures pervious areas with various LID IMPs. The SWMM simulated result using design storm data and the US EPA suggested CN values for various LID IMPs implies that how environment-friendly urban land use planning with the LID adoption is important for sustainable development at urbanizing watershed.

Low Impact Urban Development For Climate Change and Natural Disaster Prevention

  • Lee, Jung-Min;Jin, Kyu-Nam;Sim, Young-Jong;Kim, Hyo-Jin
    • 국제학술발표논문집
    • /
    • The 6th International Conference on Construction Engineering and Project Management
    • /
    • pp.54-55
    • /
    • 2015
  • Increase of impervious areas due to expansion of housing area, commercial and business building of urban is resulting in property change of stormwater runoff. Also, rapid urbanization and heavy rain due to climate change lead to urban flood and debris flow damage. In 2010 and 2011, Seoul had experienced shocking flooding damages by heavy rain. All these have led to increased interest in applying LID and decentralized rainwater management as a means of urban hydrologic cycle restoration and Natural Disaster Prevention such as flooding and so on. Urban development is a cause of expansion of impervious area. It reduces infiltration of rain water and may increase runoff volume from storms. Low Impact Development (LID) methods is to mimic the predevelopment site hydrology by using site design techniques that store, infiltrate, evaporate, detain runoff, and reduction flooding. Use of these techniques helps to reduce off-site runoff and ensure adequate groundwater recharge. The contents of this paper include a hydrologic analysis on a site and an evaluation of flooding reduction effect of LID practice facilities planned on the site. The region of this Case study is LID Rainwater Management Demonstration District in A-new town and P-new town, Korea. LID Practice facilities were designed on the area of rainwater management demonstration district in new town. We performed analysis of reduction effect about flood discharge. SWMM5 has been developed as a model to analyze the hydrologic impacts of LID facilities. For this study, we used weather data for around 38 years from January 1973 to August 2014 collected from the new town City Observatory near the district. Using the weather data, we performed continuous simulation of urban runoff in order to analyze impacts on the Stream from the development of the district and the installation of LID facilities. This is a new approach to stormwater management system which is different from existing end-of-pipe type management system. We suggest that LID should be discussed as a efficient method of urban disasters and climate change control in future land use, sewer and stormwater management planning.

  • PDF

SWMM 모형을 이용한 유역의 오염부하량 산정 (Estimation for Watershed pollutant loading with SWMM)

  • 전지홍;윤춘경
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
    • /
    • pp.689-694
    • /
    • 1999
  • This study estimated average yearly watershed pollutant loading by using SWMM(Storm Water Management Model) which is one of the nonpoint source quality models. Two sites were measured discharge and water quality at dry period and wet period. The rainfall data is used from 1989 to 1998 . During a decade, the average year watershed pollutant loading, which is SS, BOD5 , TN, TP, were 2.39E+06kg, 0.92E +05kg, 2.53E+05kg, 2.66E+04kg respectively. During dry period, SS, BOD5 TN, TP loadings were 1.89E+05kg, 1.7E+05kg, 1.04E+05kg, 1.11E+04kg, and during wet period 1.89E+05kg, 1.17E+05kg, 1.04E+05kg, 1.11E+04kg respectively so wet period loading are more than dry day loadings.

  • PDF

격자기반 운동파 강우유출모형 KIMSTORM의 개선(II) - 적용 및 분석 - (A Modified grid-based KIneMatic wave STOrm Runoff Model (ModKIMSTORM) (II) - Application and Analysis -)

  • 정인균;신형진;박진혁;김성준
    • 대한토목학회논문집
    • /
    • 제28권6B호
    • /
    • pp.709-721
    • /
    • 2008
  • 본 연구에서는 격자기반 운동파 강우유출모형 KIMSTORM을 개선한 ModKIMSTORM을 유역면적 $2,293km^2$의 남강댐 유역을 대상으로 적용성을 검토하였다. 공간해상도 500 m의 GIS 입력자료(DEM, 토지피복도, 유효토심도, 토양종류도 등)를 구축하였으며, 5개 태풍(2000년 사오마이, 2002년 루사, 2003년 매미, 2004년 메기, 2006년 에위니아) 및 2개 강우사상 (2003년 5월, 2004년 7월)을 적용하여 모형을 검보정하였다. 모형의 자동평가 기능을 이용하여 모의유량을 실측유량과 비교하였으며, 유역의 출구지점에 대한 매개변수 보정결과 결정계수($R^2$), 모형효율(E), 유출용적편차($D_v$), 첨두유량의 상대오차 ($EQ_p$), 첨두시간의 절대오차($ET_p$)의 평균은 각각 0.984, 0.981, 3.63%, 0.003, 0.48 hr로, 검정에서는 $R^2$, E, $D_v$, $EQ_p$, $ET_p$의 평균이 각각 0.937, 0.895, 8.08%, 0.138, 0.73 hr로 분석되었다. 매개변수와 관련하여 초기토양수분함량이 유출용적에 민감하였고, 하천조도계수가 첨두유량에 가장 민감한 변수로 나타났다. 호우기간동안의 공간적인 결과로부터 수문학적 요소의 작용을 살펴봄으로써 호우시 유역관리에 대한 정보를 얻을 수 있었다.

도시홍수예보를 위한 최적의 홍수유출모형에 대한 연구 (A Study on Optimal Flood Runoff Model for Urban Flood Forecasting)

  • 육지문;전수빈;김민석;문영일
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.379-379
    • /
    • 2017
  • 과거에는 하천 범람으로 인한 홍수피해가 많았으나 최근에는 도시화로 인한 불투수면적의 증가로 홍수도달시간의 단축 및 노면수의 배수불량으로 인한 내수 홍수피해가 많아졌다. 이러한 변화는 도시하천의 홍수예보에 밀접한 관련이 있으며 관련된 분석 모형 및 연계방안 또한 매우 중요하게 되었다. 일반적으로 하천에 대한 유출해석 모형으로 HEC-RAS((Hydrologic Engineering Center-River Analysis System)가 주로 사용되고 있으나 현재와 같이 도심지 하천에서는 내배수의 특성을 고려한 SWMM(Storm Water Management Model)을 사용한다. 또는 이 두모형의 연계를 통해 유출해석을 진행하기도 한다. 최근 HEC-RAS와 SWMM모형이 최신 버전을 공개하였다. HEC-RAS의 경우 2016년 9월 5.0.3버전을 출시하며 1D뿐만 아닌 2D의 모의도 가능하도록 기능을 개선하였으며 SWMM의 경우 2016년 09월 07일 5.1.011버젼이 공개되었다. 본 연구에서는 공개된 최신 모형을 도림천 지역에 적용하여 도림천 지역에 적합한 모형 및 연계 방법을 찾아보려 한다. 이를 통해 최적의 도시홍수예보 시스템을 구성하기 위한 모형 및 연계방안의 조사와 가장 합리적인 도시홍수 시스템의 구성방안을 제시하고자 한다.

  • PDF

기록치 오차와 유역모형의 검정(II) - 모니터링 검정방법 - (Errors in Recorded Information and Calibration of a Catchment Modelling System(II) - Monitoring Calibration Approach -)

  • Choi, Kyung Sook
    • 한국농공학회지
    • /
    • 제45권5호
    • /
    • pp.117-125
    • /
    • 2003
  • Since the recorded information used for operation of a catchment modelling system contain errors that influence the calibration of catchment modelling system control parameter values, the accurate estimation of these parameters is difficult. Despite these influences, existing traditional calibration approaches focus only on achieving the best "curve fitting" between simulated and recorded data, and not on generic evaluation of control parameter values. This paper introduces an Early Stopping Technique which is aimed at avoiding the procedure of curve-fitting through monitoring improvements in the objective function used for assessing the optimal parameter set. Application of this approach to the calibration of SWMM (Storm Water Management Model) on the Centennial Park catchment in Sydney, Australia is outlined. outlined.

오염부하 물질수지 분석을 통한 합류식 하수관거 적정 차집용량 결정(I) -오염부하 물질수지 분석- (Determination of Interception Flow by Pollution Load Budget Analysis in Combined Sewer Watershed - Analysis of Pollution Load Budget in Watershed -)

  • 이두진;김주환;우형민;안효원
    • 상하수도학회지
    • /
    • 제19권5호
    • /
    • pp.547-556
    • /
    • 2005
  • The objective of this study is to obtain adequate intercepting flow during wet weather conditions in combined sewer system. Two study sites are selected under considering different population density, one is developed area with heavy urbanization. Another is recently developing area. In the analysis of field investigation, SS was most significant in initial flushing effects compared with other factors and showed the result with the order of COD, TP, TN. As compared with event mean concentration(EMC) of runoff, BOD, TN and TP showed high concentrations in wide area with relatively large population density. It is by the reason that much pollution load was discharged to receiving water from urbanized area during wet period. According to results of storm-water modeling, 53% of total COD and 52% of total SS pollution load were discharged to receiving water by overflow than intercepting capacity in middle population density site. Also, in the urbanized area, pollution load was discharged to receiving water by 49% of total COD and 77% of total SS. These results can be applied to setup for pollution load flow(budget) generation, collection, treatment and discharging in order to obtain adequate intercepting flow.

SWMM을 이용한 도시계획지역 유출량 예측 정확도 향상을 위한 매개변수 산정 (Parameter estimations to improve urban planning area runoff prediction accuracy using Stormwater Management Model (SWMM))

  • 구영민;서동일
    • 한국수자원학회논문집
    • /
    • 제50권5호
    • /
    • pp.303-313
    • /
    • 2017
  • 우리나라에서는 도시 개발사업을 위한 환경영향평가를 실시하는데 있어 개발 전 중 후의 강우유출량을 분석하도록 규정하고 있다. 도시개발에 따른 수문학적 변화를 분석하고 대책을 수립하기 위해 수문모델이 사용되고 있으나 대부분의 경우 현장의 자료가 충분하지 않은 관계로 그 산정결과의 신뢰도가 문제될 수 있다. 본 연구에서는 대전의 관평천 일부유역에서 2015년 7월 부터 2016년 7월 까지 자동 모니터링 장치을 이용하고 또한 및 현장 측정을 통해 확보된 강우량 및 유출유량의 연속자료를 활용하여 SWMM을 이용하는 경우 강우 유출량 예측의 정확도를 제고하고자 하였다. 토양침투량 산정을 위해 대표적으로 사용되는 Curve Number 방법, Horton 방법 및 Green-Ampt 방법들을 사용한 경우에 대해서 투수지역과 불투수 지역에 대해 각각 최적의 Manning 조도계수와 지표면 저류깊이를 산정하여 제시하였다. 본 연구의 결과는 우리나라의 도시 유역에서 실측자료를 이용하여 강우 유출 모델을 보정하였다는 면에서 의미가 있다고 판단되며 추후 유역의 개발등의 상황에 대해는 강우 시 유출량 및 수질현상을 더욱 정확하게 예측하고 나아가서 향후의 유역 내 수문조건 변화 요인에 대한 영향을 분석하는 데 정확도를 향상시킬 수 있을 것으로 기대된다.

마산만 국지해일 예경보 모의 시스템 구축 (A Warning and Forecasting System for Storm Surge in Masan Bay)

  • 한성대;이정렬
    • 한국방재학회 논문집
    • /
    • 제9권5호
    • /
    • pp.131-138
    • /
    • 2009
  • 본 연구에서는 태풍과 해일에 의한 범람 피해 영역을 예보하기 위한 동적경보시스템에 대해서 서술하였다. 이 시스템은 연안 지역에 내수범람과 같은 잠재적 위기가 예상되는 태풍 발생 시기에 해안공학적 지식이 부족한 공공 재난관리자들이 직접 신속하게 운용할 수 있도록 일반 PC에서 MATLAB의 GUI(Graphical User Interface)를 이용하여 개발되었다. 신속한 예보를 위한 바람장은 기상청 태풍 예보 자료를 이용하는 단순파라메터 태풍모델로 생성된다. 조위와 수심평균된 조류를 신속하고 정확하게 모의를 하기 위하여 경계 조건을 사전에 준비하였다. 또한 임의의 시점에서도 정확하고 빠르게 수행되도록 MATLAB 수치프로그램을 벡터화하였다. 예상 태풍경로와 관련 태풍 예보 자료를 마우스 등을 이용하여 윈도우 화면에 입력하고 실행하면 마우스로 선정된 특정범람 예상 지점에 대한 실시간 수위정보를 얻을 수 있다. 이 시스템은 지역 재난관리자들에게 가능한 위험 정보를 신속히 파악하고 체계적으로 운용될 수 있도록 개발되었다. 그러나 모델결과는 태풍의 경로에 민감하게 작용하고, 또 지역 재난관리자들이 정확한 정보를 생산하기 위하여 오랜 기간 숙련과 지역에 적합한 경험 계수의 결정 과정이 필요하다.