• 제목/요약/키워드: Storage space requirement

검색결과 52건 처리시간 0.025초

A Memory-Efficient Fingerprint Verification Algorithm Using a Multi-Resolution Accumulator Array

  • Pan, Sung-Bum;Gil, Youn-Hee;Moon, Dae-Sung;Chung, Yong-Wha;Park, Chee-Hang
    • ETRI Journal
    • /
    • 제25권3호
    • /
    • pp.179-186
    • /
    • 2003
  • Using biometrics to verify a person's identity has several advantages over the present practices of personal identification numbers (PINs) and passwords. At the same time, improvements in VLSI technology have recently led to the introduction of smart cards with 32-bit RISC processors. To gain maximum security in verification systems using biometrics, verification as well as storage of the biometric pattern must be done in the smart card. However, because of the limited resources (processing power and memory space) of the smart card, integrating biometrics into it is still an open challenge. In this paper, we propose a fingerprint verification algorithm using a multi-resolution accumulator array that can be executed in restricted environments such as the smart card. We first evaluate both the number of instructions executed and the memory requirement for each step of a typical fingerprint verification algorithm. We then develop a memory-efficient algorithm for the most memory-consuming step (alignment) using a multi-resolution accumulator array. Our experimental results show that the proposed algorithm can reduce the required memory space by a factor of 40 and can be executed in real time in resource-constrained environments without significantly degrading accuracy.

  • PDF

재귀 분할 평균 법을 이용한 새로운 메모리기반 추론 알고리즘 (A New Memory-Based Reasoning Algorithm using the Recursive Partition Averaging)

  • 이형일;정태선;윤충화;강경식
    • 한국정보처리학회논문지
    • /
    • 제6권7호
    • /
    • pp.1849-1857
    • /
    • 1999
  • 메모리 기반 추론에서 기억공간의 효율적인 사용과 분류성능의 향상을 위하여, 재귀 분할 평균 기법을 제안하였다. 이 알고리즘은 패턴공간을 구성하는 각 초월 평면이 동일한 클래스소속으로 패턴으로 구성될 때까지 재귀적으로 분할한 후, 초월 평면별로 소속된 패턴들의 평균값을 계산하여 대표패턴을 추출한다. 또한 각 특징과 클래스간의 상호정보를 특징의 가중치로 사용하여 분류 성능의 향상을 시도하였다. 제안된 알고리즘은 k-NN(k-Nearest Neighbors) 분류기에서 필요로 하는 메모리 공간의 30~90%만을 사용하며, 분류에 있어서도 k-NN과 유사한 인식 성능을 보이고 있다. 또한 저장된 패턴 개수의 감소로 인하여, 실제 분류에 소요되는 시간에 있어서도 k-NN보다 월등히 우수한 성능을 보이고 있다.

  • PDF

제주시 공동주택과 단독주택에서 생리ㆍ위생공간의 설비ㆍ기구 실태 및 행태에 관한 연구 (Research on the Actual State of Facilities and Behavior of the Sanitary zones in Collective and Detached Houses in Jeju City)

  • 김봉애;이정림
    • 대한가정학회지
    • /
    • 제42권9호
    • /
    • pp.99-109
    • /
    • 2004
  • In residential spaces, sanitary zones are where the most basic needs of human beings are met and are used by all members of the family. A high level of privacy is therefore required in their use. This research studies the current state of sanitary zones in collective houses and in detached houses from a comparative perspective first, and then analyses the satisfaction and dissatisfaction requirement levels of dwellers of each house in comparison so as to provide data to formulate a new design for sanitary zones that is suitable for each dwelling house. The results of this research are as follows. (1) The questionnaire respondents were mostly in their 30s and 40s (99.1% in total), and lived in a nuclear family system (87.7%). (2) The number of sanitary zones was found to be more than 2 in 62% of collective houses and in 60.7% of detached houses, which leads us to conclude that non-dwelling spaces are increasing in both types of houses. (3) Of the housing facilities,13% of collective houses and 9% of detached houses were equipped with a bidet. Both percentages are very low but it needs to be noted that the percentage is relatively high in collective houses. In safety facilities, the ratio of houses furnished with safety handlers for the aged was very low in both types of houses. (4) The residents of collective houses showed high levels of dissatisfaction with regard to the problems of storage space and steam production, while residents of detached houses expressed high levels of dissatisfaction with regard to the heating system, colors of finishing materials, size, dampness, steam production, and storage space.

Characteristics of the Electro-Optical Camera(EOC)

  • Lee, Seung-Hoon;Shim, Hyung-Sik;Paik, Hong-Yul
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.313-318
    • /
    • 1998
  • Electro-Optical Camera(EOC) is the main payload of Korea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including Digital Terrain Elevation Map(DTEM). This instrument which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510 ~ 730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable rain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the EOC data users. The modulation transfer function of EOC was measured as greater than 16% at Nyquist frequency over the entire field of view which exceeds its requirement of larger than 10%, The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.

  • PDF

일반화된 허프변환의 성능평가 (Performance Evaluation of the Generalized Hough Transform)

  • 장지영
    • 융합정보논문지
    • /
    • 제7권6호
    • /
    • pp.143-151
    • /
    • 2017
  • 일반화된 허프변환은 임의의 형태의 2차원 모델을 입력영상에서 탐지 및 추출하는데 사용되어지는 효과적인 방법이다. 그러나 일반화된 허프변환의 단점으로 실행시간이 오래 걸린다는 것과 과도한 메모리 사용을 들 수 있다. 그래서 현재까지의 대부분의 연구는 일반화된 허프변환의 실행시간과 메모리 사용량을 줄이는데 집중되어왔다. 그러나 실행시간과 메모리 사용을 줄여서 개선된 알고리즘이 입력 영상에 존재하는 노이즈를 고려할 경우 어떤 성능을 제공하는가는 여전히 불분명하다. 그러므로 본 논문은 일반화된 허프변환의 성능 평가를 위한 새로운 프레임워크를 제안한다. 이를 위해 일반화된 허프변환을 신호탐지 이론의 탐지기로 간주하며 ROC 커브를 사용해서 일반화된 허프변환의 성능을 정의한다. 마지막으로 입력 영상에서의 노이즈를 고려한 정량적인 성능 평가가 가능함을 보인다.

Toward Efficient Convertible Authenticated Encryption Schemes Using Self-Certified Public Key System

  • Wu, Tzong-Sun;Chen, Yih-Sen;Lin, Han-Yu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권3호
    • /
    • pp.1157-1177
    • /
    • 2014
  • Convertible authenticated encryption (CAE) schemes enable the signer to send a confidential message and its corresponding signature to the designated recipient. The recipient can also convert the signature into a conventional one which can be verified by anyone. Integrating the properties of self-certified public key systems, this paper presents efficient and computationally indistinguishable self-certified CAE schemes for strengthening the security of E-Commerce applications. Additionally, we also adapt the proposed schemes to elliptic curve systems for facilitating the applications of limited computing power and insufficient storage space. The proposed schemes are secure against known existential active attacks, satisfy the semantic security requirement, and have the following advantages: (i) No extra certificate is required since the tasks of authenticating the public key and verifying the signature can be simultaneously carried out within one step, which helps reducing computation efforts and communication overheads. (ii) In case of a later dispute, the recipient can convert the signature into an ordinary one for the public arbitration. (iii) The signature conversion can be solely performed by the recipient without additional computation efforts or communication overheads. (iv) The recipient of the signature can prove himself, if needed, to anyone that he is actually the designated recipient.

엔트로피를 기반으로 한 특징 집합 선택 알고리즘 (Feature Subset Selection Algorithm based on Entropy)

  • 홍석미;안종일;정태충
    • 전자공학회논문지CI
    • /
    • 제41권2호
    • /
    • pp.87-94
    • /
    • 2004
  • 특징 집합 선택은 학습 알고리즘의 전처리 과정으로 사용되기도 한다. 수집된 자료가 문제와 관련이 없다거나 중복된 정보를 갖고 있는 경우, 이를 학습 모델생성 이전에 제거함으로써 학습의 성능을 향상시킬 수 있다. 또한 탐색 공간을 감소시킬 수 있으며 저장 공간도 줄일 수 있다. 본 논문에서는 특징 집합의 추출과 추출된 특징 집합의 성능 평가를 위하여 엔트로피를 기반으로 한 휴리스틱 함수를 사용하는 새로운 특징 선택 알고리즘을 제안하였다. 탐색 방법으로는 ACS 알고리즘을 이용하였다. 그 결과 학습에 사용될 특징의 차원을 감소시킴으로써 학습 모델의 크기와 불필요한 계산 시간을 감소시킬 수 있었다.

반복적 고정분할 평균기법을 이용한 메모리기반 학습기법 (A Memory-based Learning using Repetitive Fixed Partitioning Averaging)

  • 이형일
    • 한국멀티미디어학회논문지
    • /
    • 제10권11호
    • /
    • pp.1516-1522
    • /
    • 2007
  • FPA(Fixed Partition Averaging) 기법은 기억공간의 효율적인 사용과 분류성능의 향상을 위하여 제안되었던 메모리 기반 추론 기법으로 대상 패턴 공간을 분할 한 후 대표 패턴을 추출하여 분류 기준 패턴으로 사용한다. 이 기법은 메모리 사용 효율과 분류 성능 면에서 우수한 결과를 보인다. 그러나 여러 클래스가 혼합된 분할패턴공간의 경우에 원래의 패턴들을 그대로 저장하여 메모리와 분류성능에 부담으로 작용하는 문제점을 가지고 있다. 본 논문에서는 여러 클래스가 혼합된 분할공간에서 패턴비율을 고려하여 고정분할을 반복적으로 실행하여 초월평면을 생성하고 분류하는 반복적 고정분할평균기법을 제안한다. 본 논문에서 제안한 기법은 기존의 k-NN 기법과 비교하여 현저하게 줄어든 대표패턴을 이용하여 유사한 분류 성능을 보여주며, NGE 이론을 구현한 EACH 시스템과 FPA 기법 등과 비교하여 탁월한 분류 성능을 보여준다.

  • PDF

RPA분류기의 성능 향상을 위한 OHC알고리즘 (OHC Algorithm for RPA Memory Based Reasoning)

  • 이형일
    • 한국멀티미디어학회논문지
    • /
    • 제6권5호
    • /
    • pp.824-830
    • /
    • 2003
  • 메모리 기반 추론에서 기억공간의 효율적인 사용과 분류성능의 향상을 위하여 제안되었던 RPA(Recursive Partition Averaging)알고리즘은 대상 패턴 공간을 분할 한 후 대표 패턴을 추출하여 분류 기준 패턴으로 사용한다. 이 기법은 구성된 초월 평면상에서 단순히 대표패턴을 추출하여 분류 성능 저하의 원인이 되는 단점을 가지고 있었다. 여기에서는 기존 RPA의 단점을 보완하기 위해 FPD (Feature-based Population Densimeter)를 이용한 OHC (Optimized Hyperrectangle Calving) 알고리즘을 제안한다. 제안된 알고리즘은 RPA분할 종료 후 OHC를 이용하여 초월 평면을 최적화한 후 패턴 평균 기법을 적용하여 학습 결과를 산출한다. 제안된 알고리즘은 k-NN분류기에서 필요로 하는 메모리 공간의 40%정도를 사용하며 분류에 있어서도 RPA보다 우수한 인식 성능을 보이고 있다. 또한 저장된 패턴의 감소로 인하여, 실제 분류에 소요되는 시간비교에 있어서도 k-NN보다 월등히 우수한 성능을 보이고 있다.

  • PDF

최적화 기법을 이용한 부유식 해양 플랜트 상부 구조의 다층 배치 모델 (Multi-floor Layout Model for Topsides of Floating Offshore Plant using the Optimization Technique)

  • 정세용;노명일;신현경
    • 대한조선학회논문집
    • /
    • 제52권1호
    • /
    • pp.77-87
    • /
    • 2015
  • For a floating offshore plant such as FPSO(Floating, Production, Storage, and Off-loading unit), various equipment should be installed in the restricted space, as compared with an onshore plant. The requirement for an optimal layout method of the plant has been increased in these days. Thus, a layout method of the floating offshore plant was proposed in this study. For this, an optimization problem for layout design was mathematically formulated, and then an optimization algorithm based on the genetic algorithm was implemented with C++ language in order to solve it. Finally, the proposed method was applied to an example of FPSO topsides. As a result, it was shown that the proposed method can be applied to layout design of the floating offshore plant such as FPSO.