• 터널과지하공간
• /
• 제25권2호
• /
• pp.115-124
• /
• 2015

열에너지 저장은 고온 또는 저온의 잉여 열에너지를 저장하여 수요 발생 시 사용하기 위한 기술로서 에너지의 수요와 공급 사이의 불균형을 해소하고, 이를 통해 에너지 시스템의 효율을 향상시킬 수 있다. 특히 간헐적인 신재생에너지 자원을 열에너지 형태로 변환하거나 저장함으로써 에너지 믹스에서 신재생에너지의 비중을 제고할 수 있으며, 이를 위해서는 열에너지 저장 장치와의 조합이 반드시 필요하다. 지하 암반공동을 이용한 열에너지 저장은 높은 건설비용이 수반되어 그 활용이 제한적이지만, 대규모의 열에너지를 장기간 저장할 수 있는 가장 현실적인 방법이다. 또한 기후조건에 따라 외부로의 열손실이 영향을 받는 지상의 열저장소와는 달리, 열저장 지하 암반공동은 장기 운영 시 주변 암반의 히팅에 따른 열손실의 감소를 기대할 수 있다. 본고에서는 열저장 암반공동의 형상 및 다중배치 설계 시 고려해야 할 주요 인자들을 소개하고, 저장공간의 설계에 대한 가이드라인을 제안하였다.

• 정보과학회 논문지
• /
• 제42권1호
• /
• pp.107-113
• /
• 2015

데이터베이스 시스템에서, 트랜잭션이 수행한 변경 사항은 커밋 전 2차 저장장치에 보존되어야 한다. 일반적 2차 저장장치는 비휘발성 미디어의 처리 지연을 보완하기 위해 휘발성 DRAM 캐시를 가지고 있다. 그러나 휘발성 DRAM에만 쓰여지는 로그들은 영구성을 보장할 수 없으므로, DRAM 캐시에서 저장매체로 로그를 쓰는 지연 시간을 감출 수 없다. 최근 이러한 단점 극복을 목적으로 DRAM 캐시에 커패시터를 장착한 플래시 SSD가 등장하였다. 이러한 비휘발성 캐시를 가지는 저장 장치는 DRAM 캐시에 로그를 쓰고 즉시 커밋 가능하므로, 커밋 대기를 줄이고 트랜잭션 처리량을 증가시킬 것이다. 본 논문은 커패시터 백업 캐시를 사용한 SSD를 로그 저장소로 사용한 경우 데이터베이스의 트랜잭션 처리 성능에 대해 실험 및 분석 한다. 로그를 낸드 플래시에 저장하지 않고 DRAM 캐시에 저장한 직후 커밋 함으로써, 3배 이상의 처리량 향상이 가능하다. 또한 적절한 튜닝을 거친 후 이상적 로그 성능의 73% 이상을 보인다.

• 대한토목학회논문집
• /
• 제39권3호
• /
• pp.441-449
• /
• 2019

최근 국내에서 경주지진(2016.09)과 포항지진(2017.11) 등 규모 5.0 이상의 지진이 발생하여 구조물의 내진안전성에 대한 관심이 증가하고 있다. 특히, 인명피해나 재산손실을 유발하는 생활시설물은 더욱 중요성이 강조되고 있다. 생활시설물 중 가스와 유류 등의 저장시설물이 있으며 물을 저장하는 탱크가 대표적이다. 본 연구에서는 액체저장탱크의 내진성능향상을 위해 면진의 일종인 납고무받침(Lead Rubber Bearing)을 적용하고자 한다. 액체저장탱크의 기초를 고려하여 납고무받침을 설계하였으며, 실험체를 제작하여 압축 및 전단특성실험을 통해 납고무받침의 일반적 물성을 확인하였다. 납고무받침에 대한 내구성 실험 이후 진동대 실험 및 ANSYS를 이용한 유한요소해석을 통해 비면진 및 면진 적용에 따른 액체저장탱크의 거동을 분석하였다.

• FOCUS: LIFE SCIENCE
• /
• 제1호
• /
• pp.1.1-1.4
• /
• 2024

This article provides comprehensive guidance on the maintenance, cleaning, regeneration, and storage of silica-based HPLC (High-Performance Liquid Chromatography) columns. The general considerations emphasize the importance of using in-line filters and guard cartridges to protect columns from blockage and irreversible sample adsorption. While these measures help, contamination by strongly adsorbed sample components can still occur over time, leading to an increase in back pressure, loss of efficiency, and other issues. To maximize column lifetime, especially with UHPLC (Ultra-High Performance Liquid Chromatography) columns, it is advisable to use ultra-pure solvents, freshly prepared aqueous mobile phases, and to filter all samples, standards, and mobile phases. Additionally, an in-line filter system and sample clean-up on dirty samples are recommended. However, in cases of irreversible compound adsorption or column voiding, regeneration may not be possible. The document also provides specific recommendations for column cleaning procedures, including the flushing procedures for various types of columns such as reversed phase, unbonded silica, bonded normal phase, anion exchange, cation exchange, and size exclusion columns for proteins. The flushing procedures involve using specific solvents in a series to clean and regenerate the columns. It is emphasized that the flow rate during flushing should not exceed the specified limit for the particular column, and the last solvent used should be compatible with the mobile phase. Furthermore, the article outlines the storage conditions for silica based HPLC columns, highlighting the impact of storage conditions on the column's lifetime. It is recommended to flush all buffers, salts, and ion-pairing reagents from the column before storage. The storage solvent should ideally match the one used in the initial column test chromatogram provided by the manufacturer, and column end plugs should be fitted to prevent solvent evaporation and drying out of the packing bed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1553-1557
• /
• 2005

High performance and reliability of the storage system to handle a very large amount of data has been become very important. Many techniques have been applied on the various application systems to establish very large capacity storage that satisfy the requirement of high I/O speed and physical or logical failure protection. We applied RAID and LVM to construct a storage system for the global data center which needs a very reliable large capacity storage system. The storage system is successfully established and equipped on the latest Linux application server.

• 산업기술연구
• /
• 제16권
• /
• pp.217-230
• /
• 1996

This paper deals with storage and retrieval policies for S/R machine with capacity constraints in Man-On-Board AS/RS. It is assumed that storage sequence is based on SFC(spacefilling curve) routine and that storage layout is dedicated by storage policies. We present several heuristic algorithms for storage and retrieval policies which minimize total distance travelled by the S/R machine. These algorithms are based on COI, group COI, frequency of order, similarity between items and capacity of S/R machine. Experimental results of 24 combinastorial policies are provided to illustrate the performance of the heuristics under various rack utilization ratios. In storage policies, the results show that algorithms considering both similarity and frequency are better than those with COI as rack utilization is increasing. And algorithm using group COI is superior to others. In retrieval policies, the method with revision expression is shown to be better than others.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.137-142
• /
• 2005

In this paper, we propose a new servo system design strategy to reduce the position error signal(PES) and track mis-registration(TMR) in magnetic disk drive systems. The proposed method provides a systematic design procedure based on the plant model and an optimal solution via an optimization with a 'Robust Random Neighborhood Search(RRNS)' algorithm. In addition, it guarantees the minimum PES level as well as stability to parametric uncertainties. Furthermore, the proposed method can be used to estimate the performance at the design stage and thus can reduce the cost and time for the design of the next generation product. The reduction of PES as well as robust stability is demonstrated by simulation and experiments.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.140-149
• /
• 2000

A comparative analysis was peformed on the operation cost at partial loads between ice storage systems with the two conventional control strategies, i.e., storage priority and chiller priority. The storage priority control is shown to be more economic for small cooling loads, while the chiller priority control is superior when the cooling load is as large as the design value. Based on this finding, a new control strategy is devised for an ice-storage system to minimize the operation cost at any cooling load. The new control strategy is found to be comparable to the chiller priority for large cooling loads, while it is more economic for small loads compared to the conventional control strategies. The practicality of the new control strategy is also confirmed through a performance test applying the new control strategy to an existing ice-storage system.

• 정보저장시스템학회논문집
• /
• 제7권1호
• /
• pp.7-12
• /
• 2011

The flash memory has been remarked as the next generation media of portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major data storage components for desktop and servers. The purpose of our study is to upgrade a traditional mirroring scheme based on SSD storages due to the relatively slow or freezing characteristics of write operations, as compared to fast read operations. For this work, we propose a new storage management scheme called Memory Mirror-Switching based on traditional mirroring scheme. Our Mirror-Switching scheme improves flash operation performance by switching write-workloads from flash memory to RAM and delaying write operations to avoid freezing. Our test results show that our scheme significantly reduces the write operation delay and storage freezing.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.421-426
• /
• 2013

The need for extended storage of used nuclear fuel is increasing globally as disposition schedules for used fuel are pushed further into the future. This is creating a situation where dry storage of used fuel may need to be extended beyond normal regulatory licensing periods. While it is generally accepted that used fuel in dry storage will remain in a safe condition, there is little data that demonstrate used fuel performance in dry storage environments for long periods of time. This is especially true for high burnup used fuel. This paper discusses a technical approach that defines a process that develops the technical basis for demonstrating the safety of used fuel over extended periods of time.