• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.11-15
• /
• 2005

Dynamic shear moduli of isolated soy protein solutions upon heating were measured to monitor gelation. Onsets of gelation coincide with onset temperatures of denaturation in glycinin and ${\beta}$-conglycinin solutions, whereas in isolated soy proteins, onset of gelation was above denaturation temperature of ${\beta}$-conglycinin with storage modulus increasing in two steps. The first increase in storage modulus of isolated soy proteins occurred at about $78.5^{\circ}C$, while the second increase started at about $93^{\circ}C$. Gel properties of soy protein gels having different proportions of glycinin and ${\beta}$-conglycinin were measured by compression-decompression test. ${\beta}$-conglycinin was responsible for gel elasticity. Glycinin significantly increased hardness, toughness, and fracturability of gels at high heating temperature near $100^{\circ}C$. Results reveal texture of soy protein gels can be controlled by regulating ratio of glycinin to ${\beta}$-conglycinin and heating temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.1-6
• /
• 2001

A simulation method is proposed to study the amorphous structure of carbon nitride. The material properties of a non-uniform nitrogen distribution in an amorphous CN matrix can be studied. The cohesive energy of a group of randomly generated atoms can be minimized to find the relative positions of atoms. From the calculated configuration of atoms, many properties of amorphous carbon nitride can be calculated such as bulk modulus, P-V curve, sp$^3$/sp$^2$ ratio of carbon, and vibrational spectra. The calculation shows that the cohesive energy of non-uniform nitrogen distribution is lower than that of a uniform distribution. This may suggest that the regular structure of carbon nitride can at most be metastable. It is not easy to incorporate nitrogen atoms into a carbon matrix.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.474-477
• /
• 2006

Dynamic rheological properties of commercial 0.8, 1.0, and 1.2% gums [carboxylmethylcellulose (CMC), guar gum, hydroxypropylmethylcellulose (HPMC), tara gum, and xanthan gum], which can be dissolved in cold water, were investigated by small-deformation oscillatory measurements. Magnitudes of storage (G') and loss (G") moduli increased with increasing concentration of gum solutions except for xanthan gum. Guar gum exhibited greatest G' and G" values among all gums except for G' value at 0.8% concentration. Slopes of G' and G" decreased with increasing concentration of gum solutions except for xanthan gum. Tan ${\delta}$ (G"/G') values decreased with increasing concentration of gum solutions except for xanthan gum. Tan ${\delta}$ values of xanthan gum solutions were much lower than those of other gum solutions, indicating that xanthan gum solutions were predominantly more elastic than viscous.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.710-717
• /
• 2000

Tensile and fracture toughness tests of the cold-rolled STS 304 steel plate for membrane material of LNG storage tank were performed at wide range of temperatures, 11 IK(boiling point of LNG), 153K , 193K and 293K(room temperature). Tensile strength significantly increases with a decrease in temperature, but the yield strength is relatively insensitive to temperature. Elongation at 193K abruptly decreases by 50% of that at 293K, and then decreases slightly in the temperature range of 193K to 111K. Strain hardening exponents at low temperatures are about four times as high as that at 293K. Elastic-plastic fracture toughness($J_c$) and tearing modulus($T_{mat}$) tend to decrease with a decrease in temperature. The $J_c$ values are inversely related to effective yield strength in the temperature range of 111K to 293K. These phenomena result from a significant increase in the amount of transformed martensite in low temperature regions.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1585-1590
• /
• 2012

플라스틱 소재는 온도, 습도 및 자외선 등 다양한 환경의 영향으로 인해 기계적 물성변화가 심하기 때문에 체결부의 견고함이 느슨해지고 형태의 변형에 의해 부품간의 마찰 등을 유발하여 잡음이 발생하게 된다. 따라서, 본 논문에서는 자동차 칵핏 모듈에 사용되는 다양한 플라스틱 소재에 대해 온도변화에 따른 동 특성시험을 통해 유리전이온도, 저장탄성계수, 손실계수 등을 측정하여 상온 및 열화조건에 따른 물성변화를 파악하였다. 시험결과, 온도가 높을수록 저장탄성계수는 감소하고 손실계수는 증가하는 경향을 나타내었다.

• 터널과지하공간
• /
• 제6권1호
• /
• pp.19-29
• /
• 1996

Back analysis model, capable of calculating the mechanical properties and the in-situ stresses of jointed rock mass, was developed based on the inverse method using a continuum theory. Constitutive equation for the behavior of jointed rock contains two unknown parameters, elastic modulus of intact rock and stiffness of joint, hence algorithm which determines both parameters simultaneously cannot be established. To avoid algebraic difficulties elastic modulus of intact rock was assumed to be known, since the representative value of which would be quite easily determined. Then, the ratio ($\beta$) of joint stiffness to elastic modulus of intact rock was assigned and back analysis for the behavior of jointed rock was carried-out. The value $\beta$ was repeatedly modified until the elastic modulus from back analysis became very comparable to the predetermined value. The joint stiffness could be calculated by multipling the ratio $\beta$ to the final result of elastic modulus. Accuracy and reliability of back analysis procedure was successfully testified using a sample model simulating the underground opening in the jointed rock mass. Applicability of back analysis model for the underground excavation in practice was also verified by analyzing the mechanical properties of jointed rock in which underground oil storage cavern were under construction.

• 유변학
• /
• 제11권1호
• /
• pp.9-17
• /
• 1999

본 연구에서는 페놀 수지/탄소섬유 복합재료가 상온에서부터 $400^{\circ}C$까지의 온도범위에서 유리 전이와 분해반응을 경험하면서 나타내는 점탄성 특징을 연구하였다. 가교 결합된 페놀메트릭스의 전형적인 유리전이에 따라 저장 탄성율(storage modulus)은 유리전이에 의하여 감소하였고 고무상태(rubbery state)에 도달함과 동시에 후경화 반응과 분해 반응 등을 포함하는 복합적인 고온반응에 의하여 증가하다가, 최대점을 보인 후 다시 감소하는 모습을 보였다. 유리전이 과정은 시간-온도 중첩원리에 따라 해석하였으나, 분해반응이 수반된 고온에서의 점탄성 특징은 저장 탄성율을 수직 및 수평 방향으로 이동시키어 마스터 커브를 완성 할 수 있었다. 이러한 실험적 결과를 토대로 아레니우스식과 Havriliak-Negami식에서 유추된 점탄성 모델을 이용하여 유리전이와 분해반응이 연속적으로 진행되는 과정을 정량적을 해석할 수 있었다. 이때의 완화시간은 유전이 과정을 통하여 감소하다가 고무상태에 이르러 최소값을 보여주고 이후로는 고온반응에 의하여 증가하는 모습을 보여주었다. 본 연구에서 제안된 점탄성 해석 방법은 반응이 수반된 열경화성 복합재료가 보여주는 점탄성 계수의 복잡한 거동을 온도와 주파수(frequency)에 따라 정확하게 묘사함으로서 이 모델링의 유용성을 증명 할 수 있었다.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.849-862
• /
• 2017

With growing interests in using bacterial biopolymers in geotechnical practices, identifying mechanical properties of soft gel-like biopolymers is important in predicting their efficacy in soil modification and treatment. As one of the promising candidates, dextran was found to be produced by Leuconostoc mesenteroides. The model bacteria utilize sucrose as working material and synthesize both soluble and insoluble dextran which forms a complex and inhomogeneous polymer network. However, the traditional rheometer has a limitation to capture in situ properties of inherently porous and inhomogeneous biopolymers. Therefore, we used the particle tracking microrheology to characterize the material properties of the dextran polymer. TEM images revealed a range of pore size mostly less than $20{\mu}m$, showing large pores > $2{\mu}m$ and small pores within the solid matrix whose sizes are less than $1{\mu}m$. Microrheology data showed two distinct regimes in the bacterial dextran, purely viscous pore region of soluble dextran and viscoelastic region of the solid part of insoluble dextran matrix. Diffusive beads represented the soluble dextran dissolved in an aqueous phase, of which viscosity was three times higher than the growth medium viscosity. The local properties of the insoluble dextran were extracted from the results of the minimally moving beads embedded in the dextran matrix or trapped in small pores. At high frequency (${\omega}>0.2Hz$), the insoluble dextran showed the elastic behavior with the storage modulus of ~0.1 Pa. As frequency decreased, the insoluble dextran matrix exhibited the viscoelastic behavior with the decreasing storage modulus in the range of ${\sim}0.1-10^{-3}Pa$ and the increasing loss modulus in the range of ${\sim}10^{-4}-1\;Pa$. The obtained results provide a compilation of frequency-dependent rheological or viscoelastic properties of soft gel-like porous biopolymers at the particular conditions where soil bacteria produce bacterial biopolymers in subsurface.

• 유변학
• /
• 제10권4호
• /
• pp.227-233
• /
• 1998

잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate(BPH)를 Cycloaliphatic계 에폭시 (CAE)/DGEBA계 에폭시의 혼합물에 1 mol% 첨가 시킨 후 혼합 조성비에 따른 유변학적 특성과 경화 동력학에 대해 연구하였다. 잠재특성은 등온 DSC를 이용하여 각각 $150^{\circ}C$와 $50^{\circ}C$의 반응 온도에 대한시간의 함수로서 전화량을 구하여 측정하였다. 블렌드 시스템의 유변학적 특성은 레오미터를 사용한 등온 실험을 통하여 storage modulus (G'), loss modulus (G") 그리고 damping factor (tan$\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 겔화 시간과 경화 온도를 Arrenius equation에 적용시킨 결과 가교 활성화 에너지 ($E_c$)를 구할 수 있었으며 겔화 시간과 활성화 에너지 모두 DGEBA의 함량이 증가할수록 증가하였다. 경화 활성화 에너지 ($E_a$)를 동적 DSC를 이용하여 Kissinger method에 의해 구하였는데 활성화 에너지는 CAE의 함량이 증가할수록 감소함으로써 높은 반응성을 나타내었는데, 이는 짧은 반복 단위와 단순한 곁사슬기 그리고 반응 매질 내의 점도 등에 기인한다.기인한다.

• 공업화학
• /
• 제5권6호
• /
• pp.981-989
• /
• 1994

국내에서 상당량 채취되는 자연산 bentonite(Ca계)와 이를 $Na_2CO_3$로 전환시켜 상업적으로 여러 용도에서 사용되는 Na계 bentonite를 신소재 개발을 위한 점토/유기물 복합체에 대한 고찰 측면에서 matrix 수지를 ABS로 하고 이의 충진재로의 특성을 살펴 보았다. 결과, bentonite의 함량이 증가하면 탄성율은 증가하지만 충격강도는 감소하였으며, 경도는 일정하였다. Na계 bentonite가 Ca계에 비하여 탄성율은 낮지만 충격강도에서 상대적 높은 값을 나타내었다. 저장탄성율(E')은 온도가 상승함에 따라 감소하나 tan ${\delta}$는 주파수가 증가할수록 고온으로 shift되었다.