• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.13-16
• /
• 2007

The purpose of this paper is real time tilt servo control of the holographic data storage system. Holographic data storage device is a next generation data storage device with high storage density, high transfer rate and short access time. This device is very sensitive to a disturbance due to the enormous storage density. As to the recording material changed disc type, the media continuously vibrates as the disc rotates. When disc rotates, deviation, eccentricity and unbalance disturbance are occurred. This disturbances cause disc tilt, finally reference beam does not illuminates to correct incidence angle. Therefore real time tilt servo control is essential. In this paper, the algorithm is proposed to make real time tilt detection in angle multiplexing of the holographic data storage system with an additional servo beam and the experiments are performed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.2
• /
• pp.279-284
• /
• 2011

The objective of this study was to evaluate the effects of storage temperature and time on the quality parameters of eggs from laying hens at peak production. A total of 576 eggs were obtained from Lohmann Light-Brown hens, which were collected 3 times when the hens were 26, 27, and 28 weeks old. The fresh eggs were collected and measured within 2 h of being laid. Samples of 48 eggs each were stored in chambers for 2, 5, or 10 d inside a refrigerator ($5^{\circ}C$), at room temperature ($21^{\circ}C$), and at a high temperature ($29^{\circ}C$). As the storage temperature and time increased, egg weight, percentage of albumen, Haugh unit (HU), and yolk color significantly (p<0.001) decreased. In addition, egg shell weight, shell percentage, and albumen weight significantly (p<0.001) decreased with storage time. Yolk weight, yolk percentage, and albumen pH significantly (p<0.001) increased with increasing storage temperature, and yolk pH significantly (p<0.001) increased with increasing storage time. When the storage temperature was increased to $29^{\circ}C$, egg weight loss dramatically increased from 1.74 to 3.67% at 5 and 10 d of storage time, respectively. With the exception of the $5^{\circ}C$ storage temperature, HU dramatically decreased according to storage time and temperature, decreasing from 91.3 to 72.63 at $21^{\circ}C$ and from 87.62 to 60.92 at $29^{\circ}C$ during 10 d of storage; however, this decline was not found at $5^{\circ}C$. A rapid increase in albumen alkalinity was observed even after just 2 d of storage regardless of the storage temperature. Interactions between storage time and temperature were significant (p<0.001) with respect to egg weight loss, egg shell weight and percentage, albumen weight and percentage, yolk weight and percentage, albumen and yolk pH, HU, and yolk color. The results of the current study indicated that eggs from laying hens at peak production had significant deterioration of internal quality with increasing storage temperature and time. The results suggest that egg weight loss, albumen pH, and HU are parameters that are greatly influenced by the storage temperature and time of eggs from hens at peak laying.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.291-302
• /
• 2020

As the properties of the melamine-urea-formaldehyde (MUF) resins were changing during their storage time, this study investigated the impacts of the synthesis method and melamine content of the MUF resins on the pH, apparent viscosity, molecular weights, and crystallinity to estimate these properties over storage times of up to 30 days. Melaminesat three addition levels (5, 10, and 20 wt% based on the resin solids) were simultaneously reacted with urea and formaldehyde (MUF-A resins), while those at the same addition levels were first reacted with formaldehyde and then with urea(MUF-B resins). The pH values of the MUF-A and MUF-B resins decreased linearly as the storage time increased; the apparent viscosity increased linearly for the low melamine contents (5% and 10%) but increased exponentially for 20%. As anticipated, the molecular weights (Mw and Mn) increased linearly with the storage time, with a steeper increase in the Mw of the MUF-B resins compared with that of the MUF-A resins. The crystallinity of the two resin types decreased with storage time at higher melamine content. The relationships between these properties and the storage time made it possible to estimate the property changes in these resins synthesized by the different synthesis methods and melamine contents; this could help predict the properties of such resins in the industry during their storage.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.1119-1121
• /
• 2008

The effects of storage time (0, 1, and 2 month) and temperature (5, 15, and $25^{\circ}C$) on the dynamic rheological properties of hot pepper-soybean paste (HPSP) mixed with acetylated starches (AS) were studied by small-deformation oscillatory measurements. Dynamic moduli (G', G", and $\eta^*$) values of HPSP-AS mixtures increased with an increase in storage time and also decreased with increasing storage temperature. However, dynamic moduli values of the control (no added AS) were independent on storage time and temperature. Tan $\delta$ values (ratio of G"/G') in all HPSP samples did not change much with an increase in storage time and temperature. After 2 months of storage, the dynamic moduli of the HPSP-AS mixture samples were much lower than those of the control, indicating that the addition of AS can inhibit the retrogradation that developed over a long period of storage. Structural and rheological properties of HPSP samples seem to be stabilized by the presence of AS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.9
• /
• pp.727-735
• /
• 2003

The determination of completion time constitutes an important step in developing algorithms for short-term production scheduling. Existing completion time algorithms of multi-product batch processes often assume that intermediate storage tanks are always available when it is needed. In this paper, we consider a serial multi-product batch plants with ZW and NIS policy intermediate storge tank. We limit storage residence time and allocated products in the intermediate storage tank to minimize the quality change of the stored material as well as to reduce the clearing time during product change. A set of recurrence relations is suggested to calculate the completion times for the given batch sequence of products on all processing units. Also analytic solution for the suggested model is solved by a graphical method. The effectiveness of these results is proved by a few illustrative examples.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.2
• /
• pp.23-29
• /
• 1992

To compute the expected travel time of storage and retrieval (S/R) machine in automated warehousing systems most of the previous studies assumed that equal number of rack openings are required regardless of the nature of storage assignment rules. It is known that randomized storage assignment rule usually needs less storage to space than needed for full turnover-based assignment rule. The objective of this paper is compute the expected travel time of each assignment rule more equitably by taking into account the storage space required for each rule. First, the rack storage space is determined which satisfies a given service level. Then based on the standard Economic Ordering Quantity model, trade-off analysis is carried out which relates the storage space to the expected travel time of the S/R machine. Finally, example problems are solved to compare the performance of each assignment rule under varying conditions of demand pattern and service level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.8-14
• /
• 2007

This paper addresses the allocation planning of the storage location in a warehouse system that the dedicated storage method is used. In the discrete finite time period model, the demands for storage location of products are dynamic for time periods. The planning is to determine the reallocation time period and the storage location of the products in reallocation time period, which minimizes costs. The cost factors are the reallocation cost, the travel cost within warehouse and the surplus storage location cost. A model is formulated, and the property of optimal solution is characterized. The dynamic programming algorithm is developed, and a numerical example is shown.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.702-709
• /
• 2008

In this paper, the optimal thermal storage time of an air-conditioning system with slab thermal storage in office building was analyzed on the basis of the gradient method algorithm. The sum of room temperature deviation and heat extraction rate was set to the criterion function. It was calculated that four hours is the optimal thermal storage time under the standard evaluation criterion. Furthermore, some case studies were executed by controlling ratio of weight functions of room temperature deviation and heat extraction rate in criterion function. It is possible to design many kinds of optimal operation of an air-conditioning system with slab thermal storage by controlling ratio of the weight functions in criterion function.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.63-67
• /
• 2010

Holographic data storage system is one of next generation high density optical memories. Thereby storing multiple data pages using multiplexing method in one spot, we can achieve high store density and fast access time. However, for uniform writing, we must control exposure time properly by the change of writing material characteristics. Many studies have been investigated about exposure time scheduling. However, once it is decided, we cannot change the scheduled time. Therefore, it is hard to obtain uniform data intensity. In this study, we propose exposure time control method using additional red beam as the monitoring signal. Through reconstructed red beam intensity in real time, we can adjust exposure time by the writing condition change. We construct compensation method mathematically and verify the feasibility of proposed method through the experiments.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.75-87
• /
• 2012

We investigated the physicochemical properties, pasting characteristics on the rapid visco analyzer, dough characteristics on a mixograph, product characteristics, and attributes of color and hardness of products made from a wheat bagel premix and rice bagel premix according to storage period and temperature. The pH and moisture content of stored rice bagel premix and wheat bagel premix, significantly decreased, depending on the storage temperature and time. The average of water retention capacity, alkaline water retention capacity, sedimentation value, and pelshenke value all significantly decreased temperature increases and increasing storage time. he initial pasting temperature and breakdown depending on the storage temperature and time showed a significant difference, but peak viscosity and setback with increasing storage time and temperature were not significantly different. The initial pasting temperature did not significantly affect the rice bagel premix. The midline peak time and band at 8 min of mixing time of the wheat bagel premix and rice bagel premix did not differ significantly. In product attributes, the cost of wheat bagel premix rice bagel premix and the L, a, and b value in color of wheat bagel premix showed significant difference. The hardness of wheat bagel premix according to storage time and the hardness of rice bagel premix depending on storage temperature significant difference. Therefore, storage time and temperature of wheat bagel premix and rice bagel premix and does not show significant differences. merchant can get regular and consistent, it is expected to lead to the promotion of rice consumption. Futhermore, research on better method to improve it's characteristics instead of wheat bagel premix is expected to.