• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.688-698
• /
• 2015

This paper presents a modeling and a controller design for a hybrid wind turbine generator, especially with an operating mode of battery energy-storage system and a dumpload that contribute to the frequency control of the system while diesel-synchronous unit is not in operation. The proposed control scheme is based on a robust tracking controller, which takes an account of system uncertainties due to the wind flow and load variations. In order to provide robustness for system uncertainties, the range of operation is partitioned into three operating conditions as sub-models in the controller design. In the simulation study, the proposed robust tracking controller (RTC) is compared with the conventional proportional-integral (PI) controller. Simulation results show that the effectiveness of the RTC against disturbances caused by wind speed and load variation. Thus, better quality of the hybrid wind power system is achieved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.210-215
• /
• 2002

MR(Magnetorheogical) fluid composed of fine iron powders dispersed in silicon oil is utilized to many smart structures and devices because of its significant rheological property change by the application of an external magnetic field. When we deal with the shock wave attenuation of warship structures, we should be able to characterize the high frequency behavior of MR fluids. So far, however, many efforts have been focused on the material characterization of MR fluids at low frequencies below 100Hz. In this paper, the MR fluid property characterization at high frequency region is performed. An experimental setup based on wave transmission technique is made and the storage modulus as well as the loss modulus of MR fluids are found from the measured data of speed sound and attenuation. Details of the experiment are addressed and the obtained storage and loss moduli are addressed at $50kHz{\sim}100kHz$.

• IE interfaces
• /
• v.11 no.3
• /
• pp.23-40
• /
• 1998

In this paper, a method to determine the optimal configuration of operating policies in an integrated-automated manufacturing system using the Taguchi method and computer simulation experiments is presented. An integrated-automated manufacturing system called direct-input-output manufacturing system(DIOMS) is described. We only consider the operational aspect of the DIOMS. Four operating policies including input sequencing control, dispatching rule for the storage/retrieval(S/R) machine, machine center-based part type selection rule, and storage assignment policy are treated as design factors. The number of machine centers, the number of part types, demand rate, processing time and the rate of each part type, vertical and horizontal speed of the S/R machine, and the size of a local buffer in the machine centers are considered as noise factors in generating various manufacturing system environment. For the performance characteristics, mean flow time and throughput are adopted. A robust design experiment with inner and outer orthogonal arrays are conducted by computer simulation, and an optimal configuration of operating policies is presented which consists of a combination of the level of each design factor. The validity of the optimal configurations is investigated by comparing their signal-to-noise ratios with those obtained with full factorial designs.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.395-401
• /
• 2004

In the current high network-centralized computing and enterprising environment, it is getting essential to transmit data reliably at very high rates. Until now previous client/server model based NFS(Network File System) or AFS(Andrew's Files System) have met the various demands but from now couldn't satisfy those of the today's scalable high-performance computing environment. Not only performance but data sharing service redundancy have risen as a serious problem. In case of NFS, the locking issue and cache cause file system to reboot and make problem when it is used simply as ip-take over for H/A service. In case of AFS, it provides file sharing redundancy but it is not possible until the storage supporting redundancy and equipments are prepared. Lustre is an open source based cluster file system developed to meet both demands. Lustre consists of three types of subsystems : MDS(Meta-Data Server) which offers the meta-data services, OST(Objec Storage Targets) which provide file I/O, and Lustre Clients which interact with OST and MDS. These subsystems with message exchanging and pursuing scalable high-performance file system service. In this paper, we compare the transmission speed of gigabytes file between Lustre and NFS on the basis of concurrent users and also present the high availability of the file system by removing more than one OST in operation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.2141-2155
• /
• 2020

In order to meet the requirements of background change, illumination variation, moving shadow interference and high accuracy in object detection of moving camera, and strive for real-time and high efficiency, this paper presents an object detection algorithm based on sparse approximation recursion and sparse coding migration in subspace. First, low-rank sparse decomposition is used to reduce the dimension of the data. Combining with dictionary sparse representation, the computational model is established by the recursive formula of sparse approximation with the video sequences taken as subspace sets. And the moving object is calculated by the background difference method, which effectively reduces the computational complexity and running time. According to the idea of sparse coding migration, the above operations are carried out in the down-sampling space to further reduce the requirements of computational complexity and memory storage, and this will be adapt to multi-scale target objects and overcome the impact of large anomaly areas. Finally, experiments are carried out on VDAO datasets containing 59 sets of videos. The experimental results show that the algorithm can detect moving object effectively in the moving camera with uniform speed, not only in terms of low computational complexity but also in terms of low storage requirements, so that our proposed algorithm is suitable for detection systems with high real-time requirements.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.543-550
• /
• 2011

Various concentrations of whey protein isolate (WPI), such as 0.1, 0.5, 1.0, 2.5, and 5.0%(w/v), containing 1.0%(w/v) eugenol were prepared by high speed homogenization to formulate nanoemulsions (NEs) and to investigate their antimicrobial activity. The results showed that particle size decreased according to increases in WPI concentration. Similarly, the ${\zeta}$-potential value was reduced to a negative charge when using WPI concentrations >0.1%(w/v). In contrast, no significant differences in particle size were observed during 1 mon of storage, except for the 0.1%(w/v) WPI NE. The ${\zeta}$-potential value depended on the increase in WPI concentration and storage duration, except for NE1 and NE5, suggesting that a low or high concentration of emulsifier was not effective for maintaining the droplet form of the eugenol NE. The results of an antibacterial effect investigation indicated that the growth of Escherichia coli was inhibited based on an increase in eugenol concentration in all NE formulations. Moreover, a membrane permeability study showed that total leakage content increased according to incubation time.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.167-171
• /
• 2009

We conducted performance test of a 350 kW class wood pellet boiler installed at a dormitory whose total area is $1,354\;m^2$. The maximum heating capacity of the boiler is 350 kW(300,000 kcal/kg). The wood pellet boiler consists of 3 parts; boiler, hot water storage tank and wood pellet storage tank. In testing the boiler, we shut off hot water utility supply and open up floor heating water system in order to measure exact value of the heating output of the wood pellet boiler. To determine the efficiency and heating output of the wood pellet boiler, we measured mass flow rate of wood pellet, the lower heating value(LHV) of the wood pellet, mass flow rate and temperature of water for floor heating and so on. We measured the mass flow rate of fuel, wood pellet with respect to rotational speed of auger, wood pellet feeding screw. We also measured the flue gas concentration of the wood pellet boiler by using a gas analyser. The result shows that the efficiency of the wood pellet boiler is 80.6% based on lower heating value at 124 kW of heating output. At this condition, O2 concentration of the flue gas is 6.0%, CO and NOx concentrations are 85 and 102 ppm.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.121-126
• /
• 2005

Recently, an optical disc system has been proposed using blue laser diode, high NA objective lens and groove only disc structure. A new method is needed to readout CD and DVD in this Blu-Ray Disc Recorder. In order to readout CD and DVD in Blu-Ray Disc Recorder, we adopted dual-lenses actuator in consideration of optical utilization efficiency, optical performance and insurance of sufficient W.D(working distance). This dual-lenses actuator has two objectives in radial direction, one is for CD/DVD and the other is for BD. We had to solve the induced problems of collision between disc and lens, DC tilt increase, AC tilt increase, 2nd resonance deterioration and AC sensitivity drop caused by disposing two lenses in an actuator. Also we developed high response twin- objective actuator with radial tilt function to apply high-speed BD Recorder or BD Player. Consequently we presented that two kinds of dual-lenses actuators for BD Recorder have been possessed good performance in 3 axis directions. And we measured eye patterns of CD, DVD and BD by using one BD optical pick-up with dual-lenses actuator.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.248-253
• /
• 2005

The recording density of a hard disk drive is increasing so rapidly that the storage capacity of a commercial HDD in PC reaches several hundred giga bytes recently. Many technologies related to the HDD, such as servo, media, actuator dynamics, thermo and fluid dynamics, etc. must be developed together to realize high recording density. Especially, researches in the airflow inside the HDD cavity become important as the rotational speed of a disk increases. Typical problem due to the airflow is the vibration of an actuator as the airflow collides with an I-block, suspensions and sliders, that is, FIV(Flow Induced Vibration). This problem is one of the significant sources of increasing TMR so that it must be resolved. In this research, a disk damper shape has been modified to minimize the effects of airflow on the actuator. Modified disk dampers which change flow field inside HDD cavity show good effects not only on the disk (tufter but also on the vibration of an actuator. Vibrations of E- block and slider have been measured with LDV and the airflow field inside the HDD cavity has been analyzed using a commercial package to verify these effects.