• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.537-544
• /
• 2009

In order to increase the critical speed of rotating disks of which functional material could not be changed such as in optical and magnetic data storage disks, a new disk with a rim reinforced by composite material is proposed and its concept is verified by numerical analysis. Stress distributions are found for the rotating disk composed of two annular disks of which materials are isotropic inside and orthotropic outside. Dynamic equation is formulated in order to calculate the natural frequency and critical speed. For the solution of lateral vibration, a rotational symmertry condition is applied along circumferential direction and a finite element interpolation with Hermite polynomial is performed along the radial direction to obtain a proper solution. According to the results, reinforcing a disk at rim makes critical speeds drastically increased, and induces a buckling phenomenon in mode (0,0) which occurs over the lowest critical speed.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.212-215
• /
• 1999

High-speed device is essential to optoelectric IC for optical storage system such as CD-ROM, DVD, and to ADC for high-speed communication system. This paper represents the BiCMOS process which contains high-speed SAVEN bipolar transistor and analyzes the frequency and switching characteristics of it briefly. Finally, to prove that the SAVEN device is adequate for high-speed system, latched comparator operating at 500MHz is designed with the SPICE parameter extracted from BiCMOS device simulation.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.55-60
• /
• 2011

Pulsed supersonic liquid jets injected into an ambient air are empirically studied by using a high pressure ballistic range system. Ballistic range systems which are configured with high-pressure tube, pump tube, launch tube and liquid storage nozzle. Experimental studies are conducted to use with various impact nozzle geometry. Supersonic liquid jets are generated by an impact of high speed of the projectile. High speed liquid jets are injected with M = 3.2 which pressure is 1.19 GPa. Multiple jets which accompany with shock wave and pressure wave in front of the jet were observed. The shock-wave affects significantly atomization process for each spray droplets. As decreasing orifice diameter, the averaged SMD of spray jets had the decreasing tendency.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.329-330
• /
• 2015

From the results of previous my paper [10] in 2015 year of economic and electrical power storage research conference in Naju, this paper describes an application of autoregressive and moving average (ARMA) model to forecast hourly average wind speed (HAWS) in Jeju island. The models are used to build up short-term forecast of hourly average wind speed by the weighted sum of previous wind speed values.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.522-525
• /
• 2007

Frame Synchronization is applied to not only digital data transmission for data synchronization between transmitter and receiver but also data communication with satellite. When satellite image data with high resolution and mass storage is transmitted, hardware frame synchronizer for real-time processing or software frame synchronizer for post-processing is used. In case of hardware, processing with high speed is available but data loss may happen for Search of Frame Synchronization. In case of software, data loss does not happen but speed is relatively slow. In this paper, Pending Buffer concept was proposed to cope with data loss according to processing status of Frame Synchronization. Algorithm to process Frame synchronization with high speed using bit threshold search algorithm with pattern search technique and SIMD is also proposed.

• Fibers and Polymers
• /
• v.3 no.1
• /
• pp.18-23
• /
• 2002

The structure development and dynamic properties of fibers produced by high-speed spinning of P(EN-ET) random copolymers were investigated. The as-spun fibers were found to remain amorphous up to the spinning speed of 1500 m/min, and subsequent increases in speed resulted in the crystalline domains containing primarily $\alpha$ crystalline modification of PEN. The f modification was not found up to spinning speeds of 4500 m/min. On the other hand, annealing of constrained fibers spun at the 2100 m/min at 180,200, and 240^{\circ}C$ exhibited $\beta$-form crystalline structure, while the annealed fibers spun in 600-1500 m/min range exhibited dominantly $\alpha$-form. However $\beta$-form crystals disappeared above the spinning speed of 3000 m/min. With increasing spinning speeds from 600 to 4500 m/min, the storage modulus of as-spun fibers increased continuously and reached a value of about 10.4 spa at room temperature. The tan $\delta$curves showed the $\alpha$-relaxation peak at about 155-165^{\circ}C$, which is considered to correspond to the glass transition. The $\alpha$-relaxation peaks became smaller and broader, and shift to higher temperatures as the spinning speed increases, meaning that molecular mobility in the amorphous region is restricted by increased crystalline domain.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.72-78
• /
• 2020

In this paper, the risk of damages to humans and properties due to fire explosions in gasoline storage tanks is identified, and the effects of radiant heat on adjacent tanks are evaluated to present the necessary area to secure safety. A simulation was conducted to evaluate the effect of radiant heat (Maximum emission) on adjacent tanks in an oil storage tank fire due to environmental conditions (Wind speed and temperature) in the Northern Gyeonggi Province. The result indicated that the radiant heat released in the fire of an oil storage tank was increased by approximately 1.9 times by the maximum wind speed and the difference occurred in the range of 700~800 kW by the maximum temperature. If a storage tank fire occurs, securing approximately 34.4 m of holding area is necessary. In the future, evaluating the radiant heat emitted by the fire of gasoline storage tanks will be required by applying various environmental conditions, and through this, research on specific and quantitative holding area is required.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.71-78
• /
• 2012

The digital tachograph is a device that automatically records speed and distance of a vehicle, together with the driver's activity and vehicle status at an accident. It records vehicle speed, break status, acceleration, engine RPM, longitude and latitude of GPS, accumulated distance, and so on. European Commission regulation made digital tachographs mandatory for all trucks from 2005. Republic of Korea made digital tachographs mandatory for all new business vehicles from 2011 and is widening the range of vehicles that must install digital tachographs year by year. This device is used to analyze driver's daily driving information and car accidents. Under a car accident that makes the device reliability unpredictable, it is very important to store driving information with maximum reliability for its original mission. We designed and implemented a practical digital tachograph. This paper presents a storage scheme that consists of a first storage device with small capacity at a high reliability and a second storage device with large capacity at a low cost in order to reliably records data with a hardware at a low cost. The first storage device records data in a SLC NAND flash memory in a log-structured style. We present a reverse partial scan that overcomes the slow scan time of log-structured storages at the boot stage. The scheme reduced the scan time of the first storage device by 1/50. In addition, our design includes a scheme that fast stores data at a moment of accident by 1/20 of data transfer time of a normal method.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.1
• /
• pp.38-44
• /
• 2001

Nowadays, the study on XML as a standard method of exchange of information is active as Internet technology develops. This thesis designs and implements XML documents storage system using uniSQL/X in object-relational database. The system takes advantage of the merits of object-oriented databases, so that the structural information of XML documents can be effectively represented. The system uses split-storage method to allow frequent modifications of XML documents and suggests DTD-independent model so that it can store XML documents without DTD. And retrieval speed is improved by solving the issue of data duplication.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.2 s.3
• /
• pp.39-45
• /
• 1999

Pumped-storage power plants pumps the water from the lower reservoir to the upper reservoir using the extra electric power at night and generates electric power in the daytime. Currently it tends to be a high-head large-capacity machine. In this paper, we developed the computer programs for vibration analysis of the pump/turbine and generator/motor rotor system considering electromagnetic force, hydrodynamic unbalance force, dynamic characteristics of guide bearings and add mass of water. This program was verified by applying it to the real model and calculating the critical speed, natural mode and unbalance response.