• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.112-118
• /
• 1978

Four domestic frying oils (soybean, corn, rapeseed and rice bran oil) were studied on their changing properties according to thermal oxidation by means of chemical analysis of their compositions and measurements of various physical and chemical properties. The content of linoleic acid which is an essential unsaturated fatty acid and the total amount of unsaturated fatty acids were highest in soybean oil (53.2% and 80.3% respectively) among the unheated frying oils and the degree of its thermal degradation was lowest during the continuous heating period for 48 hours at $180^{\circ}C$. However in general, the contents of unsaturated fatty acids were sharply decreased by thermal oxidation whereas the saturated fatty acid contents ranging 10-17% were not changed considerably, which largely agreed with the results of iodine value measurements. The free acid and peroxide values were also lowest in soybean oil (0.09 and 5.6 respectively) among the unheated oils whereas an anomalously high free acid value was observed in rapeseed oil (54.8) which was packed in unleveled glass bottles. Such a high value is probably ascribed to the photo-catalyzed oxidation during storage. The viscosity measurements have shown similar values before heating, but after thermal oxidation for 32 hours the rapeseed and rice bran oils became too thick to measure viscosity by capillary flow method with heavy darkening in color.

• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.578-586
• /
• 2009

This study was conducted to determine the effects of alkaline electrolyzed water (AIEW), acidic electrolyzed water (AcEW), 1% citric acid, and 100 ppm sodium hypochlorite, either alone or in combination with citric acid, in reducing the populations of spoilage bacteria and foodborne pathogens (Listeria monocytogenes and Escherichia coli O157:H7) on lettuce at various exposure times (3, 5, and 10 min) with different dipping temperatures (1, 20, 40, and $50^{\circ}C$). In addition, the inhibitory effect of alkaline electrolyzed water combined with citric acid on the browning reaction during storage at $4^{\circ}C$ for 15 days was investigated. Compared to the untreated control, electrolyzed water more effectively reduced the number of total bacteria, mold, and yeast than 100 ppm sodium hypochlorite under the same treatment conditions. All treatments exposed for 5 min significantly reduced the numbers of total bacteria, yeast, and mold on head lettuce. The inactivation effect of each treatment on head lettuce was enhanced as the dipping temperature increased from 1 to $50^{\circ}C$, but there was no significantly difference at temperatures greater than $40^{\circ}C$ (p<0.05). The total counts of yeast and mold in head lettuce were completely eliminated when a combination of 1% citric acid and AlEW treatment was used at temperatures greater than $40^{\circ}C$. However, decreased reduction in L. monocytogenes (2.81 log CFU/g), and E. coli O157:H7 (2.93 log CFU/g) on head lettuce was observed under these treatment conditions. In addition, enhanced anti-browning effect was observed when the samples were subjected to both 1% citric acid and AlEW treatment at temperatures greater than $40^{\circ}C$ compared to when single treatments alone were used. Thus, this combined treatment might be considered a potentially beneficial sanitizing method for improving the quality and safety of head lettuce.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.520-527
• /
• 2015

This study investigated the physiological activities of garlic extracts frozen at -20, -80, and $-196^{\circ}C$. To determine the optimum freezing temperature for maintaining garlic's physiological activity, antioxidant and antibacterial activities were investigated. The antioxidant activities were determined by DPPH radical scavenging ability, SOD-like activity, nitrite-scavenging ability, and reducing power. Total phenolic compounds and flavonoids of garlic extract frozen at $4^{\circ}C$ (control) were measured as $6.91{\pm}0.69{\mu}gGAE/g$ and $0.315{\pm}0.017{\mu}gQE/g$, respectively. Although the content of total phenolic compounds was not affected by the different freezing temperatures, the flavonoids contents of garlic extract frozen at $-20^{\circ}C$ were slightly decreased. The DPPH radical scavenging ability of garlic extracts (2 mg/mL) frozen at $-80^{\circ}C$ was 61%, whereas those frozen at $-20^{\circ}C$ and $-196^{\circ}C$ were 51%. SOD-like activity was slightly increased by freezing. However, the nitrite scavenging ability (18% at pH 3.0) and reducing power (OD700=1.6) were not affected by freezing temperatures. Antimicrobial activities did not show significant differences depending on freezing temperatures. Taken together, the physiological activities of the frozen garlic extracts were not significantly changed by the freezing temperatures; however, the antioxidant and antibacterial effects of the phenolic compounds and flavonoids were maintained at $-80^{\circ}C$. These results suggest that $-80^{\circ}C$ frozen garlic could maintain a higher quality than the conventional freezing method ($-20^{\circ}C$) without loss of physiological activities during the storage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.193-204
• /
• 1998

The single crystal of the $LiTaO_3$has large electro-optic effects, so it is applied to optical switch, acousto-optic deflector, and optical memory device as hologram using photorefractive effect. In this study, optic-grade undoped $LiTaO_3$and Fe:LiTaO$LiTaO_3$single crystals were grown by the Czochralski method and optical transmission and absorption spectrums were measured in the wavelength of UV-VIS range. The curie temperature was determined with DSC and by measuring capacitance for the grown undoped crystal and ceramic powder samples of various Li/Ta ratio. In case of having a 48.6 mol% $Li_2O$ as a starting Li/Ta ratio, the results of concentration variations were below 0.01 mol% $Li_2O$ all over the crystal, so it was confirmed that $LiTaO_3$single crystals were grown under congruent melting composition having optical homogeneity. The curie temperature of the Fe:$LiTaO_3$crystal was increased with increased with increased doped Fe concentrations;by the ratio of $7.5^{\circ}C$ increase per Fe 0.1 wt%. Also, the optical transmittance was about 78 %, which was sufficient for optical device.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.29-37
• /
• 1999

In this study, we have prepared PLT thin films having various La concentrations by using sol-gel method and studied on the effect of La concentration on the electrical properties of PLT thin films. As the La concentration increases from 5mol% to 28mol%, the dielectric constant at 10kHz increases from 428 to 761, while the loss tangent decreases from 0.063 to 0.024. Also, the leakage current density at 150kV/cm has a tendency to decrease from 6.96${\mu}A/cm^2$ to 0.79${\mu}A/cm^2$. In the result of hysteresis loops of PLT thin films, the remanent polariation and the coercive field decrease from 9.55${\mu}C/cm^2$ to 1.10${\mu}C/cm^2$ and from 46.4kV/cm to 13.7kV/cm, respectively. With the result of the fatigue test on the PLT thin films, we have found that the fatigue properties are improved remarkably as the La concentration increases from 5 mol% to 28mol%. In particular, the PLT28) has paraelectric phase and its charge storage clensity and leakage current density at 5V are 134fC/${\mu}cm^2$ and 1.01${\mu}A/cm^2$, respectively. The remanent polarization and coercive field of the PLT(10) film are 6.96${\mu}C/cm^2$ and 40.2kV/cm, respectively. After applying of $10^9$ square pulses with ${\pm}5V$, the remanent polarilzation of the PLT(10) film decreases about 20% from the initial state. In the results, we conclude that the 10mol% and the 28mol% La doped PLT thin films are very suitable for the capacitor dielectrics of new generation of DRAM and NVFRAM respecitively.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.321-329
• /
• 2013

Recently, the medium-low level radioactive waste from nuclear power plant must be transported from temporary storage to the final repository. Medium-low level radioactive waste, which is composed mainly of the liquid ion exchange resin, has been consolidated with cementitious material in the plastic or iron container. Since cementitious material is brittle, it would generate cracks by impact load during transportation, signifying leakage of radioactive ray. In order to design the safety transporting equipment, there is a need to check the compressive strength of the current waste. However, because it is impossible to measure strength by direct method due to leakage of radioactive ray, we will estimate the strength indirectly by the dynamic modulus of elasticity. Therefore, it must be identified the relationship between of strength and dynamic modulus of elasticity. According to the waste acceptance criteria, the compressive strength of cement based solid is defined as more than 3.44 MPa (500 psi). Compressive strength of the present solid is likely to be significantly higher than this baseline because of continuous hydration of cement during long period. On this background, we have tried to produce the specimens of the 28 day's compressive strength of 3 to 30 MPa having the same material composition as the solid product for the medium-low level radioactive waste, and analyze the relationship between the strength and the dynamic modulus of elasticity. By controling the addition rates of AE agent, we made the mixture containing the ion exchange resin and showing the target compressive strength (3~30 MPa). The dynamic modulus of elasticity of this mixtures is 4.1~10.2 GPa, about 20 GPa lower in the equivalent compressive strength level than that of ordinary concrete, and increasing the discrepancy according to increase strength. The compressive strength and the dynamic modulus of elasticity show the liner relationship.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.57-66
• /
• 1988

As a method of utilization of sardine, the processing conditions of the sardine sauce extracts and the taste compounds of products were investigated. To prepare the sardine sauce extracts, chopped sardine was mixed with $1\%$, onion powder, $1\%$ garlic powder, $1\%$ red pepper powder, loft koji and $50\%$ water, and then hydrolyzed under different conditions of hydrolysis. The optimum conditions for hydrolysis were $55^{\circ}C$, 6 hours, pH 6.5-7.0. After hydrolysis, the hydrolysates were heated at $100^{\circ}C$ for 20 minutes with $5\%$ soybean protein isolate for inactivation of enzymes and improvement of bitter taste of the hydrolysates. Finally, $10\%$ salt was added to develop the characteristic taste of sauce extracts. The major taste compounds of the products were free amino acids, non-volatile organic acids and nucleotides and their related compounds. The major free amino acids in the products were arginine, histidine, lysine, glutamic acid, phenylalanine, leucine and alanine. The contents of these free amino acids were in the range of $68.2\%\;to\;69.9\%$ of the total free amino acids of products. The major non-volatile organic acids ill the products were lactic acid and $\alpha-ketoglutaric$ acid which occupied more than $95\%$ of total non-volatile organic acids. The contents of free amino acids, non-volatile organic acids and nucleotides and their related compounds were not changed during storage. Total creatinine, betaine and TMAO were seemed to act an auxiliary role in taste of the products. Judging from the results of chemical experiments and sensory evaluation, the product prepared with koji and soybean protein isolate was excellent as seasoning materials.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.186-193
• /
• 2013

Potential of consumer unit packaging was investigated for quality maintenance during export simulation in king oyster mushrooms (Pleurotus eryngii). Mushrooms were harvested in late May, precooled to $4^{\circ}C$ within 6 hours, and then packaged for shipping in two ways: 2 kg bulk packaging in a polyethylene (PE) bag or three types of unit packaging methods such as 400 g in polypropylene film bag (PPB), 200 g on styrofoam tray + PE shrinkage film wrapping (STW), and 200 g in polyethylene terephthalate (PET) containers (PETC). For local distribution of bulk-packaged commodity, mushrooms were sorted again and packaged into 3 consumer units in the same way as for the initial shipping packages. Simulation of refrigerated container shipping was performed in a walk-in type pilot storage at $0.5^{\circ}C$ for 5 weeks, while local marketing simulation was carried out on the shelf at $7^{\circ}C$ for 7 days. During the shipment simulation, creation of modified atmosphere (MA) was substantial in 2 kg bulk packages with low $O_2$ below 2% and high $CO_2$ over 15% whereas, in PPB and PETC unit packages, relatively higher $O_2$ concentrations were observed. On the shelf at $7^{\circ}C$, $CO_2$ concentrations rapidly increased in PPB and PETC packages despite the short marketing period. Overall marketability evaluated by off-flavor, browning, and texture rating was maintained at excellent level when 2 kg bulk packaging in PE or unit packaging in PPB and PETC were used for shipment. In contrast, establishment of MA was very slight in STW packages during shipment and local distribution resulting in poor quality after export simulation. The results suggested that shipment using adequate consumer unit packaging is more practical and economically beneficial than using bulk packaging in the export program consisting of 5-week shipment and 7-day local distribution.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.182-185
• /
• 2011

This study was conducted to develop an appropriated management for safety of children snacks sold around school. Total 598 items as targeted food were collected; 66 biscuits, 320 candies, 57 chocolates, 40 ice creams and 115 beverages. Microbiological hazards such as total aerobic bacteria, Coliforms, Escherichia coli, Bacillus ceruse, Yeasts & molds were measured by analytical method in Korean food code. Total aerobic bacteria and Yeasts & molds were detected in cookies at the level of less than 2.69 and 2.65 $log_{10}$ CFU/g and the detection rates were 54.55 and 62.12%, respectively. Bacillus cereus was detected in 1 snack only at the level of 1.39 $log_{10}$ CFU/g but it was less than Korean microbial standards and specifications (3 $log_{10}$ CFU/g). Total aerobic bacteria and Yeasts & molds were detected in candies less than 2.86, 3.36 $log_{10}$ CFU/g and the detection rates were 46,8% respectively. Total aerobic bacteria, Yeast & mold were detected in chocolates at the levels less than 2.52 and 1.87 $log_{10}$ CFU/g and the detection rates were 33 and 22% respectively. Total aerobic bacteria in both ice creams and beverages were detected at the levels less than 3.39 and 1.35 $log_{10}$ CFU/g and the detection rates were 82 and 5% respectively. Coliforms were found in one ice cream (1.39 $log_{10}$ CFU/g) only. The result of this study indicated that all children snacks around school were suitable for microbial standard and specifications in Korean Food Code. However, since most children snacks around school are circulated without proper storage temperature and handing condition, consistent microbial management for children snacks are needed.