• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.639-645
• /
• 2013

The aim of the study is to investigate the method to estimate a storage life of propelling charge on the decrease of muzzle velocity by stochastic gamma process model. It is required to establish criterion for state failure to estimate the storage life and it is defined in this paper as a muzzle velocity difference between reference value and maximum allowable standard deviation multiplied by 6. The relationship between storage time and muzzle velocity is investigated by nonlinear regression analysis. The stochastic gamma process model is used to estimated the state distribution and the life distribution for storage time for 155mm propelling charge KM4A2 because the regression analysis is a deterministic method and it can't describe the distribution of life for storage time.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.5
• /
• pp.638-645
• /
• 2002

The purpose of this study is to evaluate the quality characteristics and consumer acceptance of the Kimchi affected by the storage method and the duration. The characteristics of Kimchi fermented and stored in the traditional method, such as cave facility or pit storage on the shore were compared to the Kimchi which was stored in the Kimchi refrigerator using the physicochemical and sensory evaluation. The quality of Kimchi stored by the Kimchi refrigerator was most acceptable with 3 month storage, while that of Kimchi stored by the storage facility under the ground on the shore was 1 month storage. Shelf life of Kimchi was extended up to 5 month stored by Kimchi refrigerator, and 3 month for the Kimchi stored under the ground on the shore.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.3
• /
• pp.90-98
• /
• 1984

In this paper, the anthor made a basic study of the storage function model and examined several constants in applying the storage function model to flood run-off analysis by dealing with the data in the Supyung and Hoyng Syung watershed, the applicabilities of the storage function model are examined by searching this optimum model parameters in two watersheds. The results are summarized as follows, 1) The optimum values of the exponential constants, P, in the storage function model showed to be 0.77 to 0.87 in two watersheds observed, therefore it was confirmed that the storage fumction model was approaching to the surface runoff model. 2) It was confirmed that the interval of variation of the storage constant, K, Showed to be larger than that of the exponential constant, p. 3) Relative erros in the discharge obtained by using the storage function model and the SDFP mothod showed to be 20 and 17 percent respectively to the observed discharge, therefore it was confirmed that the applicability of the storage function model using the SDFP method are excellent for runoff analysis. 4) A simple method is proposed for estimating the lag time in the storage function model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.8
• /
• pp.534-540
• /
• 2008

In this paper, the optimal bang-bang control problem of an air-conditioning system with slab thermal storage was formulated by gradient method. Furthermore, the numeric solution obtained by gradient method algorithm was compared with the analytic solution obtained on the basis of maximum principle. The control variable is changed uncontinuously at the start time of thermal storage operation in an analytic solution. On the other hand, it is showed as a continuous solution in a numeric solution. The numeric solution reproduces the analytic solution when a tolerance for convergence is applied severely. It is conceivable that gradient method is effective in the analysis of the optimal bang-bang control of the large-scale system like an air-conditioning system with slab thermal storage.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.2
• /
• pp.85-89
• /
• 2011

In retrieving process in angle multiplexing Holographic Data Storage(HDS), It is important to search the exact recording angles. In this paper, we propose the retrieving angle searching method using pre-scan. Pre-scan method is means that rotating the galvano mirror before the retrieving process. Therefore, retrieving signals are maximized when between the galvano mirror and recoded angle are exactly matched. Through the measured signals, we will find the exact angle and compensate tangential tilt angle. The experimental results shows propose method is enough to apply the HDS.

• Solar Energy
• /
• v.7 no.2
• /
• pp.37-53
• /
• 1987

This study has been prepared for the purpose of developing the system performance prediction method of natural circulation solar hot water system. The storage tank of the natural circulation solar hot water system equipped with flat-plate solar collector is located at higher elevation than the solar collectors. Therefor, the storage tank temperature distribution formed accordance with configuration of storage tank by flow rate of circulating fluid affect system collection efficiency. In this study measure the storage tank temperature distribution with various experimental system under real sun condition and present the theoretical prediction method of the storage tank temperature. Moreover measure the flow rate not only day-time but also night-time reverse flow rate with die injection visual flow meter. Main conclusion obtain from the present study is as follows; 1) The storage tank temperature distribution above the connecting pipe connection position is the same as that of the fully mixed tank and below the connection position is the same as that of stratified tank. 2) The system performance sensitive to the storage tank temperature distribution. Therefore detailed tank model is necessary. Average storage tank temperature can be calculate 3% and storage tank temperature profile can get less than 10% difference with this model system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.281-285
• /
• 1996

On farm demonstration of urea treatment (5 kg urea dissolved in 60 litre water/100kg) of straw was performed at 6 different sites and treated straw was stored by three different methods i.e., plastic covered, mud plastered and existing farmers technique (mud plastered on the top and open from sides) to determine the best storage method in field. Untreated and treated samples were taken after 5 week storage period and subjected to crude protein, crude fibre and cell wall constituents analysis. In situ dry matter digestibility of straw was measured by nylon bag technique in buffalo bulls. Crude protein content increased by 100 to 153 percent in treated straw stored by different methods. Maximum increase in crude protein of treated straw was noticed in mud plastered method. Urea treatment of straw resulted in significant decrease in crude fibre contents in all the storage methods. Treatment of straw enhanced the in situ digestibility by 25-49 percent and maximum digestibility (53%) was found in mud plastered storage method. It was concluded that the mud plastered storage method for urea treated straw was found to be the best at farm level.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.763-765
• /
• 2005

In the area of remote sensing, an immense number of images are continuously generated by various remote sensing systems. These images must then be managed by a database system efficient storage and retrieval. There are many types of image database systems, among which the content-based image retrieval (CBIR) system is the most advanced. CBIR utilizes the metadata of images including the feature data for indexing and searching images. Therefore, the performance of image retrieval is significantly affected by the storage method of the image metadata. There are many features of images such as color, texture, and shape. We mainly consider the shape feature because shape can be identified in any remote sensing while color does not always necessarily appear in some remote sensing. In this paper, we propose a metadata representation and storage method for image search based on shape features. First, we extend MPEG-7 to describe the shape features which are not defined in the MPEG-7 standard. Second, we design a storage schema for storing images and their metadata in a relational database system. Then, we propose an efficient storage method for managing the shape feature data using a Wavelet technique. Finally, we provide the performance results of our proposed storage method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.6
• /
• pp.303-309
• /
• 2013

Cloud storage services are used for efficient sharing or synchronizing of user's data across multiple mobile devices. Although cloud storages provide flexibility and scalability in storing data, security issues should be handled. Currently, typical cloud storage services offer data encryption for security purpose but we think such method is not secure enough because managing encryption keys by software and identifying users by simple ID and password are main defectives of current cloud storage services. We propose a secure data access method to cloud storage in mobile environment. Our framework supports hardware-based key management, attestation on the client software integrity, and secure key sharing across the multiple devices. We implemented our prototype using ARM TrustZone and TPM Emulator which is running on secure world of the TrustZone environment.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.475-480
• /
• 2000

The transient dynamic-response analysis of fuel-storage tanks of flying vehicles accelerating in the vertical direction is achieved with finite element method. A fuel-storage tank is a representative example of the fluid-structure interaction problem, in which structure and fluid media interact strongly. For the accurate analysis of this complicated fluid-structure system, we employed ALE(arbitrary Lagrangian-Eulerian) coupling method. Two types of fuel-storage tanks, one with two baffles and the other without baffle, are considered to examine the effect of baffles. The fuel-storage tank with baffles shows more uniform hydrodynamic pressure distribution, resulting effective stress in structural region and faster convergence from transient to steady states. MSC/Dytran, a commercial FEM software for the 3D coupled dynamic analysis, is used for this analysis.