• 설비공학논문집
• /
• 제6권3호
• /
• pp.315-324
• /
• 1994

The energy recovery efficiency(ERE) of an aquifer thermal energy storage system was calculated using curvilinear coordinate. The results of the calculation were compared with the experimental results, and agreed within 11% of the discrepancy. The variation of ERE was investigated as a function of the underground water natural velocity, the amount of the stored energy, and period of the energy recovery. The slower the natural velocity and shorter the recovery period, the higher ERE was yielded. Also it was found that increase in the amount of energy storage yields higher ERE, and carries out less influential ERE to the natural velocity. Reiterative usage of the aquifer as a thermal storage tends to gradually increase ERE. The result of this study implements that the aquifer thermal energy storage system is suitable for large cooling/heating loads, such as district cooling/heating.

• Water Engineering Research
• /
• 제1권3호
• /
• pp.171-185
• /
• 2000

A mathematical model to adequately predict complex mixing characteristics of sorptive polluants in natural streams with pools-and-riffes has been developed. In this model, sorption of pollutants onto the bed sediment as well as mass storage and exchange in the storage zones were incorporated into one-dimensional mass balance equatins. The geometric and hydraulic characteristics of the pool-riffle sequences were properly conceptualized. Simulations with parameters of pool-and-riffle streams better fit the measured data in overall shape and peak concentration than simulations with parameters for uniform channels. The analyses on the characteristics of the storage zone model parameters reveal that a linear relationship between the logrithm of the storage zone volume ratio and a function of the friction factor exists. A linear relatiohship might also be tenatively assumed between the logarithm of the dimensionless mass exchange coefficient and the logarithm of the aspect ratio of the storage zone if some of the high values of the dimensionless mass exchange coefficient collected on the successive bed forms are excluded.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.531-534
• /
• 2003

A model using a nonlinear programming technique was applied for allocating the optimal water depending on storage level changes of the Sumjin dam. The objective function of optimization model was set up to maintain the storage at target level, to satisfy the water demand, and to maximize the hydropower production. In this way, the water allocation as to target level and instream flow was optimized and compared with historical operational data.

• Journal of Biosystems Engineering
• /
• 제25권4호
• /
• pp.279-286
• /
• 2000

Most of the domestic cold storage rooms are inefficient for agricultural products because of temperature gradients inside the storage rooms. Temperature gradients are developed mainly by improper airflow pattern inside the storage room, which is a main cause of the spoilage of the agricultural products. There proper airflow pattern is essential to minimize these temperature gradients and the spoilage. The performance and characteristics of a cold storage room were determined as a function of airflow pattern and temperature distribution in forced circulation cold storage room. A commercial CFD(computational fluid dynamics) code was used to simulate 3-D airflow in the cold storage room. Solving the flow equations for the storage room, a standard k-$\varepsilon$ turbulent model was implemented to calculate steady state turbulent velocity distribution. The CFD prediction results were compared with temperature measurements inside the cold storage room. In case of pallet storage, Temperature gradients inside pallet storage was reduced because the contact area of cold air expanded through an alley of airflow in storage. But is case of bulk storage, the last temperature of storage considerably rose more than the initial temperature of storage. The reason was that bulk storage didn't include any alley of airflow in storage.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.87-94
• /
• 2006

In this paper, we investigated a feasibility of applying highest and lowest temperatures of the next day forecasted from a meteorological observatory to operation of an air-conditioning system with thermal storage. First we investigated specific characteristics of the time series of forecasted temperatures and errors in Osaka from 1994 to 1996. Since the forecast error is not always small, it might be difficult to use the forecasted data without correction for the sizing and the control of the thermal storage system. On the other hand, the autocorrelation functions of the forecast errors decrease relatively slowly during high summer season when cooling thermal storage is required. Since the values of the autocorrelation function; for one day are larger than 0.4, not small, the forecast errors can be predicted by proper statistical analysis. Thus, the forecasted values of the highest temperatures for the next day were improved by using the stochastic time series models.

• 안보군사학연구
• /
• 통권2호
• /
• pp.237-260
• /
• 2004

As the research work about XML based on the development of Internet and according to the information exchange standard is being carried out, the need of discovering new methods to store XML documents and manage them efficiently according to the frequency of large-capacity XML documents increases. Consequently, as a kind of back-end database system, XML storage systems such as RDBMS, OODBMS and Native XML DBMS etc. are coming forth in order to save XML documents. It is an urgent task to make comparisons among usage expense, function comparison storage, inquiry, and manage dimension for each DBMS. This paper makes an analysis and comparison of DTD-independent XML document access methods in RDBMS, OODBMS and Native XML DBMS for XML storage and management. After analyzing the advantages and disadvantages of each access method and comparing the function of typical commerce DBMS such as Oracle 8i, eXcelon and Tamino for finding the possibility of military applications, an another appropriate method to save XML documents is proposed as to find an implementation approach to save structural XML documents.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.83-91
• /
• 2017

Purpose: The purpose of this study is to develop a quality assurance model and to determine appropriate warranty period for a guided missile using its field data. Methods: 10 years of actual firing data is collected from the defense industry company and military. Parametric maximum likelihood estimation for a reliability function is determined with the data. Results: The reliability function estimates average lifetime of the missile. That function shows a user requirement, 80% reliability (lifetime) is come up when 8 years have passed, which is longer than the estimates in the missile's development phase. Conclusion: Quality assurance warranty for a guided missile must be established with actual test data. It is necessary to update and modify the reliability prediction and the warranty period with actual field test data.

• Journal of Information Processing Systems
• /
• 제18권6호
• /
• pp.763-769
• /
• 2022

Transportation allocation requires information such as storage location and order information. In order to guarantee the safe transmission and real-time sharing of information in all links, an intelligent transportation control system based on blockchain technology is designed. Firstly, the technical architecture of intelligent transportation information traceability blockchain and the overall architecture of intelligent transportation control system were designed. Secondly, the transportation management demand module and storage demand management module were designed, and the control process of each module was given. Then, the type of intelligent transportation vehicle was defined, the objective function of intelligent transportation control was designed, and the objective function of intelligent transportation control was constructed. Finally, the intelligent transportation control was realized by genetic algorithm. It was found that when the transportation order volume was 50×103, and the CPU occupancy of the designed system was only 11.8%. The reliability attenuation of the code deletion scheme was lower, indicating better performance of the designed system.

• 대한토목학회논문집
• /
• 제28권1B호
• /
• pp.21-32
• /
• 2008

홍수예보는 홍수로 인한 인명과 재산피해를 저감하기 위한 비구조적 대책으로 그 정확성은 매우 중요한 요소이다. 그러나 우리나라 홍수예보에서 주로 쓰이는 저류함수모형은 그 적용에 있어서 매개변수의 결정이 매우 중요하지만 이를 결정하는 것은 매우 어렵다. 그래서 현재에는 주로 경험식을 이용하거나 수문 기술자의 판단에 의해 보정이 이루어지고 있는 실정이다. 이에 본 연구에서는 저류함수모형 매개변수의 특성을 알고 범위를 설정하기 위해서 민감도 분석을 수행하였으며, 보정을 위해 다양한 보정방법과 목적함수를 적용하여 그 성능을 평가하였다. 또한 유역에 맞는 매개변수를 결정하기 위한 방법을 제시하고, 결정된 매개변수를 이용하여 검증홍수사상에 대해 검증을 수행하였다. 본 연구의 결과와 기존에 제시된 매개변수를 사용한 결과를 비교하였다. 기존에 제시된 대상유역의 저류함수모형 매개변수도 좋은 결과를 나타내었으나, 새롭게 추정된 매개변수는 보다 더 좋은 결과를 도출하였다.

• 대한토목학회논문집
• /
• 제26권1B호
• /
• pp.27-38
• /
• 2006

현재 국내의 홍수예보시스템의 예측 모형으로 저류함수모형을 사용하고 있다. 저류함수모형은 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 저류함수모형을 실제 홍수사상에 적용하는데 있어 매개변수를 결정하는 것이 매우 어렵다. 저류함수모형의 매개변수 보정을 모형 운영자의 주관적인 판단아래 시행착오에 의한 수동보정 방법을 사용하여 왔다. 본 논문에서는 홍수통제소에서 사용하고 있는 저류함수 모형의 대표(평균) 매개변수와 시행착오법(Trial & Error Method) 그리고 최적화기법(Optimization Technique)에 의해 보정된 매개변수를 비교 분석하였다. 또한 모의효율을 평가하기 위하여 목적함수별, 보정방법별로 평가지표들을 산정하고 비교 분석하였다. 분석 결과, 최적화기법의 하나인 유전자 알고리즘(Genetic Algorithm)이 목적함수에 따른 변동성이 가장 적었으며, 목적함수로는 SSR(Sum of Squared of Residual)이 가장 적합한 것으로 판단하였다.