• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.5
• /
• pp.176-182
• /
• 1983

This paper derives a newly neveloped analytic optimal condition to minimize the operating cost of a generation system in the aspect of Power System Planning, When the system includes pumped-storage units. The analytic optimal condition is derived by defferentiating the analytic cost function, Which were obtained by assuming the load and generating as Gaussian random variables, with respect to the variations of pumping energy. The condition is resulted in very simple form and various optimization techniques can be used. The simulation results of a case study were compared with the results of the conventional methods to prove the usefulness of the algorithm.

• KIEAE Journal
• /
• v.9 no.5
• /
• pp.39-46
• /
• 2009

Most Plastic Green Houses in Korea are made according the European weather condition, which lead to have very low solar energy efficiency. Moreover, the function of green houses, as well as the structure of them, has not changed for Korean weather condition. Therefore, the structure and function of them should adopt the regional weather condition in order to improve the energy efficiency. This paper investigates the current plastic green housesin Korea, and presents an alternative for improving the energy efficiency. The elements of green houses were investigated. When using a partial opaque insulation with a thermal storage body, the difference of indoor air temperature became 20C during daytime, and 5C during night, which will save massive fossil fuels.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.153-154
• /
• 2017

The thermal analysis of transportation and storage cask for SNF was conducted during short term loading operations for forced gas drying condition. The fuel cladding temperature in 6 regions of SNF in the cask during the short term loading operations for forced gas drying condition is shown in the Fig. 3. The thermal analysis results of calculated maximum cladding temperature in each process demonstrate that operating scenario of TFD in detailed design maintain well below the temperature limits of $400^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.319-324
• /
• 2008

The sweet pepper (paprika) is one of the most important exported vegetable crops in Korea. This study evaluated the storability of sweet pepper fruits between 2 cultivars with different maturities under different storage conditions. The sweet peppers ('Special' and 'Fiesta') were grown in a rockwool hydroponic system, and harvested two different maturities: half-maturity and full-maturity levels. The sweet pepper fruits were stored in MA(non-ventilated) and non-MA(ventilated) conditions at 4 and $9^{\circ}C$ for 20 days. The storability of sweet pepper fruit was the highest in $4^{\circ}C$ MA conditions that remained 5% carbon dioxide and 10% oxygen during the storage. The ethylene concentration in MA condition showed $2{\sim}8{\mu}l/l$ regardless of storage temperatures, cultivars and maturities. The fruits packaged with non-ventilated film, showed lower weight loss, and higher firmness, and there was no different about decay ratio compared to the fruits packed ventilated film. The coloration of semi-matured fruit that colored 50% before storage progressed faster in non-ventilated packaging condition at $9^{\circ}C$, but their color did not changed as same as level of full-matured fruit. The electrolyte leakages and respiratory rate that estimated degree of chilling injury was highest in non-MA(ventilated) conditions of 'Special' full matured fruit placed at room temperature for 3 days following storage at $4^{\circ}C$ for 20 days. It may be suggested that sweet pepper fruit packed sealed (non-ventilated) film and stored at non-chilling temperature can be maintained better quality for long term storage.

• Journal of Nutrition and Health
• /
• v.49 no.1
• /
• pp.51-58
• /
• 2016

Purpose: The aim of this work was to study the change in antioxidant activity depending on storage temperature and storage period in romaine and cherry. Method: The plant material was stored at $0.7{\pm}0.6^{\circ}C$, $3.5{\pm}2.8^{\circ}C$, and $4.7{\pm}1.4^{\circ}C$. Cherry and romaine were stored for a period of 9 days and 7 days, respectively. The cherry was taken from each group of samples at regular intervals of days and the romaine was taken from each group of samples at regular intervals of 2days. Vitamin C, total polyphenol, and total flavonoid stability and antioxidant capacity including DPPH, total antioxidant capacity (TAC) were measured. Results: For cherry, the levels of TAC and flavonoid were higher at the $0.7{\pm}0.6^{\circ}C$ condition than other conditions (p < 0.05). The polyphenol and vitamin C levels were not significantly different among storage conditions. In the case of romaine, the level of TAC was highly preserved until 7 days at the $0.7{\pm}0.6^{\circ}C$ condition. Vitamin C level was significantly lower at the $3.5{\pm}2.8^{\circ}C$ condition (p < 0.05). DPPH activity was highest at the $0.7{\pm}0.6^{\circ}C$ condition (p < 0.05). DPPH activity was shown in order of $0.7{\pm}0.6^{\circ}C>4.7{\pm}1.4^{\circ}C>3.5{\pm}2.8^{\circ}C$. Conclusion: The results indicated that the narrow differences and fluctuation in temperature were associated with antioxidant capacity and it might enhance the nutritional shelf life of vegetables and fruits.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.277-282
• /
• 2010

Durability of automotive polymer electrolyte membrane fuel cell (PEMFC) strongly depends the startup/shutdown procedure. Formation of hydrogen/air boundary in the anode gas channel, so-called reverse current condition, particularly induces fast degradation of the cathode. Under the reverse current condition, high voltage is present at the cathode facing air in the anode gas channel and is a function of residual oxygen concentration in the gas channels, that increases with storage time and reaches 21% (air) eventually. In this study, effects of residual oxygen concentration in a PEMFC on degradation of the PEMFC.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.481-488
• /
• 2003

A fluid-structure-isolator interaction program was developed in this study. The behavior of liquid regions are simulated by the boundary element method, and then the technique of analyzing the free surface motion in time domain is developed by using the nonlinear free surface boundary condition(NFBC) and the condition of interface between the structure and the fluid. Structure regions are modeled by the finite element method. In order to construct the governing equation of the fluid structure interaction(FSI)problem in time domain, the finite elements for a structure and boundary elements for liquid are coupled using the equilibrium condition, the compatibility condition and NFBC. The isolator is simulated by equation proposedin 3D Basis Me. In order to verify the validity and the applicability of the developed fluid- structure -Isolator interaction program, The horizontal forced vibration analysis was performed. The applicability of the developed method is verified through the artificial seismic analysis of real size liquid storage tank.

• Solar Energy
• /
• v.12 no.1
• /
• pp.81-87
• /
• 1992

The purpose of this study was to investigate the fluid flow characteristics of heat storage in sensible heat storage system for use In cooling and heating of buildings. Heat storage material was gravels and experiments were performed in the condition of constant temperature. The experimental parameters were fluid velocity and size of gravels. The experimental results of the heat storage quantity and the heat storage efficiency by the variation of packing size and fluid velocity were as the follows : The maximum value of the heat storage capacity and heat storage efficiency and the minimum arriving time for maximum heat storage were observed when the packing ratio was 72.5% and the fluid velocity was 0.14m/s.

• Journal of Radiation Protection and Research
• /
• v.36 no.4
• /
• pp.174-182
• /
• 2011

With the reactor operation conditions - 4.3 wt% $^{235}U$ initial enrichment, burn-up 55,000 MWd/MTU, average power 34 MW/MTU for three periods burned time for 539.2 days per period and cooling time for 100 hours after shut down, to set up the condition to determine the minimum height (depth) of spent fuel storage pool to shut off the radiation out of the spent fuel storage pool and to store spent fuels safely, the dose rate on the specific position directed to the surface of spent fuel storage pool induced by the neutron and gamma-ray from spent fuels are evaluated. The length of spent fuel is 381 cm, and as the result of evaluation on each position from the top of spent fuel to the surface of spent fuel storage pool, it is difficult for neutrons from spent fuels to pass through the water layer of maximum 219 cm (600 cm from the floor of spent fuel storage pool) and 419 cm (800 cm from the floor of spent fuel storage pool) for gamma-ray. Therefore, neutron and gamma-ray from spent fuels can pass through below 419 cm (800 cm from the floor) water layer directed to the surface of spent fuel storage pool.

• Solar Energy
• /
• v.7 no.2
• /
• pp.37-53
• /
• 1987

This study has been prepared for the purpose of developing the system performance prediction method of natural circulation solar hot water system. The storage tank of the natural circulation solar hot water system equipped with flat-plate solar collector is located at higher elevation than the solar collectors. Therefor, the storage tank temperature distribution formed accordance with configuration of storage tank by flow rate of circulating fluid affect system collection efficiency. In this study measure the storage tank temperature distribution with various experimental system under real sun condition and present the theoretical prediction method of the storage tank temperature. Moreover measure the flow rate not only day-time but also night-time reverse flow rate with die injection visual flow meter. Main conclusion obtain from the present study is as follows; 1) The storage tank temperature distribution above the connecting pipe connection position is the same as that of the fully mixed tank and below the connection position is the same as that of stratified tank. 2) The system performance sensitive to the storage tank temperature distribution. Therefore detailed tank model is necessary. Average storage tank temperature can be calculate 3% and storage tank temperature profile can get less than 10% difference with this model system.