• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.112-117
• /
• 2012

This paper presents a new stopper mechanism for precision stage by using the Piezoelectric element actuator. The new stage including a new stopper mechanism has the precision positioning mechanism that was been developed for generation displacements with nanometer accuracy and a millimeter dynamic range simulataneouly. The stage is composed not of the mechanical two stopper but of only one Piezoelectric element actuator. The characteristics for the new stage and the stopper have been evaluated experimentally. As the results, we can know that the linearity error characteristics of stage is 30nm in the $20{\mu}m$ measurement range. In addition, the experimental results are confirmed the possibility of the movement in millimeter range.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.421-431
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing due to the influence of global warming. In a situation where the installation of floating wind turbines is increasing around the world, concerns about the huge loss and collapse of floating offshore wind turbines due to strong typhoons are deepening. Regarding to the safe operation of the floating offshore wind turbine, the development of a new type of disconnectable mooring system is required. A new fairlead chain stopper considered in this study is devised to more easily attach or detach the floating offshore wind turbine with mooring lines comparing to other disconnectable mooring apparatuses. In order to investigate the structural safety of the initial design of fairlead chain stopper that can be applied to MW-class floating type offshore wind turbine, scale-down structural models were produced using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by performing the tensile tests. The finite element analysis of fairlead chain stopper was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the finite element analysis, the structural weak parts on the fairlead chain stopper were reviewed. The structural model tests were performed considering the main load conditions of fairlead chain stopper, and the test results were compared to the finite element analysis. Through the results of this study, it was possible to experimentally verify the structural safety of the initial design of fairlead chain stopper. It is also judged that the study results can be usefully used to improve the structural strength of fairlead chain stopper in a detailed design stage.

• 해양환경안전학회지
• /
• 제26권3호
• /
• pp.277-285
• /
• 2020

Recently, studies have been actively conducted on seismic design and improvement of the seismic performance of bridges, buildings, factories, and plants. In particular, heavy items that are being manufactured or waiting to be shipped from factories (such as generators, engines, and boilers) must be equipped with seismic stoppers to prevent them from moving or falling during an earthquake. Seismic stoppers should be suitably determined by the size and weight of these heavy items; however, they have no general design standard. In this study, structural analyses and seismic tests were conducted to evaluate the performance of newly designed seismic stoppers. Structural analysis was performed on three stopper models to estimate the external load at which the yield stress of the material was not exceeded. Based on the analysis results, a seismic test of the stopper was carried out in accordance with the AC156 test method. Finally, product specifications for all three seismic stopper models were determined and their static/dynamic load performance was evaluated.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.707-714
• /
• 2016

We present a piezoelectric energy harvester with stopper-engaged dynamic magnifier which is capable of significantly increasing the operating bandwidth and the energy (power) harvested from a broad range of low frequency vibrations (<30 Hz). It uses a mass-loaded polymer beam (primary spring-mass system) that works as a dynamic magnifier for another mass-loaded piezoelectric beam (secondary spring-mass system) clamped on primary mass, constituting a two-degree-of-freedom (2-DOF) system. Use of polymer (polycarbonate) as the primary beam allows the harvester not only to respond to low frequency vibrations but also generates high impulsive force while the primary mass engages the base stopper. Upon excitation, the dynamic magnifier causes mechanical impact on the base stopper and transfers a secondary shock (in the form of impulsive force) to the energy harvesting element resulting in an increased strain in it and triggers nonlinear frequency up-conversion mechanism. Therefore, it generates almost four times larger average power and exhibits over 250% wider half-power bandwidth than those of its conventional 2-DOF counterpart (without stopper). Experimental results indicate that the proposed device is highly applicable to vibration energy harvesting in automobiles.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.66-71
• /
• 2021

In this study, the shape design optimization of a refrigerator door hinge stopper was performed to reduce the discrepancy in the opening forces of the left and right doors of a double-door refrigerator. A finite element model was constructed and analyzed by quasi-static analyses to evaluate the structural performance of the door hinge stopper. The reaction moment calculated at the hinge axis was used as a measure of the door opening and closing forces. The design objective is to increase the door opening force by 50% while maintaining the door closing force and the maximum stress calculated in the body of the hinge stopper at the current level. A new design concept with a contacting slot was proposed to decouple the door closing and opening forces. Shape optimization was performed to determine the dimensions of the new design of the hinge stopper, and the rib pattern was determined by topological optimization to further increase the door opening force. It was observed that the new design met all design requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.96.5-96
• /
• 2001

The probe with a 110mm diameter is originated and fabricated to measure hole accuracies of extremely deepholes. It consists of a measuring unit, an actuator unit, an active rotation stopper and a feed unit. The rolling of the probe is restricted and adjusted by the active rotation stopper. The probe is fed by the feed unit. In this measurement, accuracies are measured by using a rolling proof apparatus and machine table of deep hole boring machine instead of the stopper and the feed unit, respectively. Straightness, roundness and a diameter of a 110-mm hole are measured by the probe and testers made for each measuring purpose ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.182-186
• /
• 1996

In this work, a method is described to investigate the progressive and compound process in the coining and piercing operation for given conditions and parameters, using the FEM simulation and model experiment. The effect of the die shape on the compound process is established, and the die shape depends on the position of coining die and the width of the part coined. It is found that Progressive process is better than compound process, since material's filling into the die is not completed and the higher stress acts on the edge of the punch according to width being increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.

• 한국인터넷방송통신학회논문지
• /
• 제11권6호
• /
• pp.93-106
• /
• 2011

본 논문에서는 이더넷 환경에서 ARP 스푸핑(spoofing) 기능을 이용하여 특정 컴퓨터들의 인터넷 사용을 소프트웨어적으로 차단할 수 있는 인터넷 차단기를 설계하고 구현하였다. 구현된 차단기에서는 ARP 스푸핑을 작동시키고 모든 패킷들이 관리자 컴퓨터로 보내지는 상황에서 그 패킷들을 본래 라우터로 전달하지 않고 폐기하는 방식으로 인터넷 차단기를 구현하였다. 본 논문에서 구현한 차단기는 차단 대상 컴퓨터들에 에이젼트(Agent)와 같은 별도의 프로그램 설치 없이 관리자 컴퓨터 단독으로 차단 기능이 가능하다. 또한 차단 대상 컴퓨터들을 수동으로 정해주는 것 뿐만 아니라 네트워크에 접속되어있는 컴퓨터들을 자동으로 인식하는 기능을 갖는다. 다수의 컴퓨터를 대상으로 한 실험 결과 컴퓨터 수에 관계 없이 ARP 스푸핑 메시지 발송 주기를 4초 미만으로 유지하면 인터넷 차단이 가능하였으며 ARP 스푸핑을 위한 추가적인 네트워크 부담은 무시할 정도인 것으로 파악되었다. 구현된 인터넷 차단기는 물리적으로 같은 스위치에 연결되어 있다면 모든 서브넷의 노드들을 인식할 수 있으며 서로 다른 서브넷의 컴퓨터들에 대해서도 인터넷 차단이 가능하다. 구현된 인터넷 차단기는 대학교 실습실에서 강의 중 인터넷 차단을 위한 도구로 및 망 관리를 위한 효율적인 도구로도 활용되고 있다.

• 한국인터넷방송통신학회논문지
• /
• 제17권3호
• /
• pp.137-143
• /
• 2017

IoT 카스토퍼 기반의 스마트주차 안내 시스템을 제안하고 구현하였다. IoT 센서 모듈을 내장한 카스토퍼 감지센서는 기존의 매립형 주차센서에 비해 시공이 용이한 장점을 가진다. 순차적 점대점 통신을 통해 카스토퍼에서 전송된 주차상태 데이터는 IoT 게이트웨이를 통해 웹서버에 저장되고, 스마트기기의 안드로이드 앱을 통해 원격으로 주차공간을 확인할 수 있다. 배터리로 구동되는 IoT 카스토퍼는 소모 전력을 줄이기 위해 워치독 타이머와 연동한 액티브/슬립 싸이클 방식을 사용한다. 카스토퍼의 소모전력은 액티브 모드와 슬립 모드에서 각각 80mW와 25mW로 측정되었다. 슬립 모드에서 발생하는 전력 소모를 최소화 할 수 있는 초저전력 IoT 센서모듈 구조를 제안하였다. 실제 주차장에서 구현된 시스템의 동작을 검증하였다.