• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.12 no.1
• /
• pp.369-386
• /
• 1999

Recently WHO death from smoking-related illness would increase more than a thousand in the future. But in spite of various harms, smoking cigarette in developing countries is increasing especially in the adolescents. So in order to evaluate whether auricular acupuncture therapy is effective to quit smoking, clinical examination was carried out. And the results showed that age of starting smoking become lower. The cause of smoking is curiosity, relaxation, envy and comradeship. For this reason they want to stop smoking but feel it is difficult to do. Cigarette smoking didn't show any significant change after auricular acupuncture in both control and therapy. And physical and psychological change did not present any significance. However, auricular acupuncture therapy was appeared to be effective to stop smoking. So with these results, further systemic research to examine the effect of auricular acupuncture is seem to be necessary.

• Proceedings of the KSPS conference
• /
• 2000.07a
• /
• pp.165-165
• /
• 2000

In the phoneme level, English stop sounds are classified with the feature of 'voicing': voiceless and voiced (p/b, t/d, k/g). But when realized, a voiceless stop is not alwats the same sound. For example, the two 'p' sounds in 'people' are different. The former is pronounced with much aspiration, while the latter without it. This allophonic differnece between [$P^h$] and [p] out of an English phoneme /p/ can be well explained to Koreans because in Korean these two sounds exist as two different phonemes {/ㅍ/ and /ㅃ/ respectively). But difficulties lie in teaching the English voiced stop sounds (/b, d, g/) to Koreans because in Korean voiced stops do not exist as phonemes but as allophones of lenis sounds (/ㅂ, ㄷ, ㄱ/). For example, the narrow transcription of '바보' (a fool) is [baboo]. In the word initial position, Korean lenis stops are pronounced voiceless and even with a slight aspiration while in the inrervocalic environments they become voiced, That is in Korean voiced stops do not occur independently and neither they have their own letters. To explain all these more effectively to Koreans, it is very helpful to use Korean Phenetic Alphabet (KPA) which is devised by Dr. LEE Hyunbok (a professor of phonetics at Seoul National Univ. and chairman of Phonetic Society of Koera.)(omitted)

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.154-160
• /
• 2012

Recently, development of technologies for autonomous vehicles has been actively carried out. This paper proposes a computer vision system to recognize lanes, crosswalks, and stop lines for autonomous vehicles. This vision system first recognizes lanes required for autonomous driving using the RANSAC algorithm and the Kalman filter, and changes the viewpoint from the perspective-angle view of the street to the top-view using the fact that the lanes are parallel. Then in the reconstructed top-view image this system recognizes a crosswalk based on its geometrical characteristics and searches for a stop line within a region of interest in front of the recognized crosswalk. Experimental results show excellent performance of the proposed vision system in recognizing lanes, crosswalks, and stop lines.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.6
• /
• pp.106-112
• /
• 2014

Recently, tidal power generation has gained much attention. South Korea's tidal power generation systems were imported from abroad by turnkey type and have being operated. Therefore, for efficient operation and technological independence of a tidal power system, development of core technology is required. This paper deals with the start stop control system of water turbine generator in the tidal power plant, as one of our development project results. Using the SCADA system, the status and operations of water turbine generator in the tidal power plant, as well as simulation for calculation of maximum power were carried out. A small model type of start stop control device was also developed. In addition, the control system in Sihwa tidal power plant was modeled, and the results obtained by the dynamic simulation were given in graphics by 2D simulator.

• Phonetics and Speech Sciences
• /
• v.15 no.3
• /
• pp.45-52
• /
• 2023

Previous studies have established a role for cognitive differences in explaining variability in speech processing across individuals. In the case of perceptual cue weighting in the context of a sound change, studies have produced conflicting results regarding the relationship between executive function and the use of redundant cues. The current study aimed to explore this relationship in acoustic cue weighting during speech production. Forty-one Korean-speaking children read a list of stop-initial words and completed two tests that assess executive function, i.e., Dimensional Change Card Sorting (DCCS) and digit n-back. Voice onset time (VOT) and fundamental frequency (F0) were measured in each word, and analyses were carried out to determine the extent to which children's executive function predicted their use of both informative and less informative cues to the three pairs comprising the Korean three-way stop laryngeal contrast. No evidence was found for a relationship between cognitive ability and acoustic cue weighting in production, which is at odds with previous, albeit conflicting, results for speech perception. While this result may be due to the lack of task demands in the production task used here, it nevertheless expands the empirical ground upon which future work in this area may proceed.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.70-76
• /
• 2012

Recently, because people are taking a great interest in the water supply system and the related facilities are getting larger, the surge suppression is very important problem. The waterhammer occurs when the pumps are started or stoped for operation or tripped due to the power failure. As the waterhammer problems as a result of the pump power failure were very serious, these situations were carefully investigated. Accordingly, we carried out both numerical simulations and field tests to confirm the safety of Juam intake pumping station in which had the in-line pumps. In this paper, it was reviewed that the water supply system has the reliability on the pressure surge, in case the air chambers were installed at both the inlet and the oulet of the in-line pumping station. From the numerical simulations, we found that negative pressure occurred at the inlet disappeared and high pressure occurred at the outlet reduced due to the air chambers. And these results of numerical simulations verified by the field tests. The field tests carried out in case of normal start, normal stop, one and two of pumps emergency stop. By results of simulations and field tests, we are sure that Juam intake pumping station in which have the air chambers is safe for the waterhammer. In addition, we suggested the operation methods of facilities for safe maintenance of the pumping station.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.817-823
• /
• 2011

This paper proposes a cooling stop temperature control(CST) and a phase transformation control(PTR) which aim at obtaining the uniform temperature and quality along the longitudinal direction of the high strength steel on the run-out table(ROT) process. The problems of the temperature control are analyzed for the conventional steel and the new control concepts are derived from a time-temperature transformation(TTT) diagram. The proposed control technologies are verified from the simulation results under the temperature prediction model by the heat transfer governing equation, and the temperature estimation simulator. It is shown through the field test of the hot strip mills that the phase transformation ratio of the high strength steel is considerably improved by the proposed temperature controls.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.289-295
• /
• 2005

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the manoeuvrability of own ship. The actual manoeuvering characteristics of ship can be adequately judged from the results of typical ship trials manoeuvres. Author carried out sea trials based full scale for turning test, zig-zag test, spiral tests and crash-stop test at actual sea going condition. The turning circle manoeuvres were performed on starboard and port sides with $35^{\circ}$ rudder angle at the service speed, and Zig-zag procedures were performed on both sides with $10^{\circ}$ and $20^{\circ}$ rudder angle respectively. Spiral tests were carried out on the both sides and crash stop test was also carried out. The results from tests could be compared directly with the standards of manoeuverability of IMO and consequently the manoeuvring qualities of the ship is fully satisfied with its.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.56-63
• /
• 2006

In order to evaluate the mechanism of cellulose hydrolysis, the complementary DNA encoding Glycoside Hydrolase Family (GHF)74 was cloned from Phanerochaete chrysosporium. Depending on the presence of Cellulose Binding Module (CBM), it can be classified as GHF74A or GHF74B. The GHF74A gene from P. chrysosporium (PcGHF74A) consists of 2163 bp encoding a protein of 721 amino acid residues. The PcGHF74A showed homology of 70~77% compared with the GHF74 from other filamentous fungi. The PcGHF74B, which contains CBM and is a member of family 1, was transcribed to various transcripts depending on the nature of carbon sources and their concentration. To study the possible presence of splice variants in GHF74B transcripts in P. chrysospoium, we carried out RT-PCR analysis using primers that designed based on the annotation data and sequenced data. Our result indicated that PcGHF74B was transcribed to several splicing variants in various culture conditions. Especially in the culture of 2% cellulose, three transcript products were observed. First transcript was presumed to be a full length ORF that contained 11th intron with stop codon at position 2562 bp. The second one consisted of 12 exons and 11 introns with stop codon at position 1187 bp with 7th exon. The shortest transcript consisted of 10 exons and 9 introns with stop codon at 910 bp in the 7th exon. These premature stop codon might prevent the synthesis of fully active GHF74 or contribute for the production of protein with distinct function depending on the ambient carbon sources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.