• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.95-103
• /
• 2001

The purpose of Introducing a combined cycle with gas turbine in power plants is to reduce losses of energy, by effectively using exhaust gases from the gas turbine to produce additional electricity or process. The efficiency of a combined power plant with the gas turbine increases, exceeding 50%, while the efficiency of traditional steam turbine plants is approximately 35% to 40%. Up to the present time, the PID controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain without any experience, since the gain of the PID controller has to be manually tuned by trial and error procedures. This paper focuses on the neural network tuning of the 2-DOF PID controller with a combined 2-DOF parameter (NN-Tuning 2-DOF PID controller), for optimal control of the Gun-san gas turbine generating plant in Seoul, Korea. In order to attain optimal control, transfer function and operating data from start-up, running, and stop procedures of the Gun-san gas turbine have been acquired and a designed controller has been applied to this system. The results of the NN-Tuning 2-DOF PID are compared with the PID controller and the conventional 2-DOF PID controller tuned by the Ziegler-Nichols method through experimentation. The experimental results of the NN-Tuning 2-DOF PID controller represent a more satisfactory response than those of the previously-mentioned two controllers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.930-935
• /
• 2001

The experimental characterization of hydrodynamic bearing spindle motor is performed for the practical implementation of high-performance hard disk drive system. Firstly, the design concept of hydrodynamic bearing for the disk drive system is addressed including the herringbone grooved journal bearing, the spiral grooved thrust bearing, capillary seal design, and the viscous pumping of fluid. Secondly, the experimental evaluation is performed for the disk drive system in which the hydrodynamic bearing spindle motor is implemented and its dynamic performances are compared with conventional ball-bearing spindle motor. The key parameters include NRRO(Non Repeatable Run-Out), disk dynamics, acoustics, and resultant PES (Position Error Signal). Finally, the external gyro-exciting test results including 200k CSS(Continuous Start-Stop) on three angular attitudes(0,90, 180 degree) are presented in order to verify the practical reliability of disk drive system subject to the gyro-motion of hydrodynamic bearing spindle motor.

• 제어로봇시스템학회논문지
• /
• 제20권3호
• /
• pp.356-363
• /
• 2014

This paper covers improvement of the humanoid robot platform HUBO2, known as the HUBO2+. As a necessity of the growth of the humanoid platform, a robust, reliable and user friendly platform is needed. From this standpoint, HUBO2+ is the most improved humanoid robot platform in the HUBO series. The mechanical design has been changed to increase the movable range and to stop joint compulsion. Additionally, all of the electrical parts are re-designed to be un-breakable in an unexpected situation. A smart power controller with robot status check panel is attached on the back. Additionally, a diagnosis tool, the HUBO-i, has been developed. Moreover, each joint motor controller of HUBO2+ has a Protection Function and a PODO system is provided for handling the robot easily.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.88-93
• /
• 1995

The ball screw preloaded for high nigidity and accuracy increases frictional resistance, therefore, its temperature and positioning error rise. In this paper, 2 diamensional temperature distributions of a ball screw with preload are analyzed according to the rotational speeds and stop times by a finite element method. The theremal behaviors of a ball screw are measured to examine the analyzed datum. The examined results show that the trends of temperature rising and axial distributions in steady state are nearly extimate but the temperature low. The differences of temperature ate seems to be caused by not exact heat transfer coefficients. More than an hour is consumed for calculation by FEM. So the modified lumped method for the real-time estimation of the thermal distribution is proposed. The estimated temperature of a ball serw by the modified lumped method is more exactly estimated than by FEM, nd that method takes less than several millisec. Moreover it can be used to estimate heat transfer coefficients.

• 한국산업정보학회논문지
• /
• 제11권3호
• /
• pp.1-9
• /
• 2006

IEEE 802.11 WLAN은 핸드오프 과정에서 일시적인 통신로의 단절이 발생하는 하드 핸드오프을 적용한다. 이 방식은 핸드오프 과정에서 트래픽의 유실을 초래하며, 트래픽 유실을 복구하기 위해 old AP에서 new AP로 트래픽을 포위딩하는 방식을 사용하나 실시간 서비스에는 적용이 어렵다. 본 연구에서는 무선 LAN 기반 홈네트워크의 실시간서비스의 핸드오프에서 트래픽 유실 및 전송시컨스 에러를 줄이기 위한 방식을 제안한다. 이를 위해 IEEE 802.11e에서 권고하는 priority queue scheme을 적용하고, 실시간 서비스의 핸드오프 트래픽에 대해 priority queue의 사용 우선권을 주어 핸드오프시 트래픽 유실 및 전송시컨스 에러를 줄이는 방식을 제안하고, 시뮬레이션을 통해 성능을 분석하였다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2123-2125
• /
• 2001

In thermal power plant, the efficiency of a combined power plant with a gas turbine increases, exceeding 50%, while the efficiency of traditional steam turbine plants is approximately 35% to 40%. Up to the present time, the PID controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain without any experience, since the gain of the PID controller has to be manually tuned by trial and error procedures. This paper focuses on the neural network tuning of the 2-DOF PID controller with a separated 2-DOF parameter (NN-Tuning 2-DOF PID controller), for optimal control of the Gun-san gas turbine generating plant in Seoul. Korea. In order to attain optimal control, transfer function and operating data from start-up, running, and stop procedures of the Gun-san gas turbine have been acquired, and a designed controller has been applied to this system. The results of the NN-Tuning 2-DOF PID are compared with the PID controller and the conventional 2-DOF PID controller tuned by the Ziegler-Nichols method through experimentation. The experimental results of the NN-Tuning 2-DOF PID controller represent a more satisfactory response than those of the previously-mentioned two controller.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제10권2호
• /
• pp.51-58
• /
• 2004

In this paper, the problem of subway platform is analyzed and the alternative as a screen door is suggested. This paper aims to improve the facility law in subway platform. Because facility law related to platform is absent, the study scope is limited to detail design that is matched to rules. Field survey is performed to 300 persons that are 150 men and 150 women in Shingil station in which the screen door is established. Also the persons are used the screen door at least 3 times. It makes the field survey credible. The study is proceeded as follows ; First, the law related to platform, the problem of platform, and the plan and status of screen door are analyzed. Second, the definition, and composition of screen door are examined. Then, kinds of screen door is analyzed and the advantage and disadvantage of each kind of screen door are compared. Third, the necessity of establishing the screen door is examined through field survey and error range of stop position is investigated. Through this flow, final results is abstracted. Direction of facility related to subway platform, applied objective and range are suggested based on this study. This study focuses the stability of platform, pleasantness, and energy saving and suggests facility improvement direction through introducing the screen door and further study.

• 한국시스템다이내믹스연구
• /
• 제11권4호
• /
• pp.25-59
• /
• 2010

The Korean government has operated various mega-development projects in order to help nation progress into the future. However, many problems and concerns have been raised on the mega-projects' delay and failure in South Korea. Moreover, there are many technical and executive problems; such as trial and error of development work, failure of validity test, complicated decision-making processes, and so on. With these concerns and problems to mega-development projects, finding a sustainable development from mega-projects is becoming a new issue in the field of mega-development projects. Therefore, the main purpose of this study is to investigate whether or not most mega-development projects conducted by the government exactly corresponds with sustainable development (such as environmental soundness, economic efficiency and social equity) focusing on Saemangeum project. Using causal loop analysis, this study gives some significant results to us. First, for environmental soundness, both central and local government should ensure water-purity control system for farming, industry, leisure, and others. Second, for economic efficiency, both governments not only have to secure a budget for completion of infrastructure of the Saemangeum project but also support financial assistance to Saemangeum project. Third, for social equity, three local governments (i.e., Gunsan, Gimje, and Buan) should stop debate and conflict with regard to an administrative district of Saemangeum region. Finally, most politicians should not use Saemangeum project for political means. Rather, they should recognize the project as a motive power for economic development of Jeollabukdo.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.898-904
• /
• 2017

DFT(Discrete Fourier Transform) is one of the most widely used method to estimate the phasor of a relaying signal. The harmonics are eliminated by the DFT. However, high frequency components, except for harmonics, are not removed and cause an error in DFT-based phasor estimation process. This paper suggests high frequency noise reduction method by using a newly designed low-pass filter to estimate a signal phasor. When selecting a stop-band cut-off frequency of the low-pass filter, high frequency components generated by faults are considered. To reduce the phasor estimation delay caused by a low-pass filter, this paper proposes a low-pass filter whose settling time is reduced. An adverse effect of high frequency noise on DFT-based phasor estimation is reduced. To evaluate the performance of the proposed method, signals which are collected under a fault condition at a 345[kV] transmission system modeled by EMTP-RV are used.

• 한국의학물리학회지:의학물리
• /
• 제26권2호
• /
• pp.87-92
• /
• 2015

호흡연동 래피드아크 치료는 무건운 하중의 선형가속기 갠트리의 회전과 정지의 반복과정에서 갠트리 회전 재시작점의 오차와 다엽조리개의 정확한 움직임 및 갠트리 속도와 같은 래피드아크의 선량정확도를 결정하는 요소들의 오차 가능성으로 인한 선량 오류가 발생할 수 있다. 본 연구에서는 이러한 갠트리의 회전과 정지의 반복적인 동작이 호흡연동 래피드아크 치료의 정확도에 어떠한 영향을 끼치는 지 치료 시 총 회전과 정지 동작 수를 결정하는 빔조사 구간 길이의 변화를 통해 분석하였다. 총 10명의 간암 환자를 대상으로 래피드아크 치료계획을 수립하였고, RPM 호흡연동 장치와 정확한 빔조사 구간 길이를 설정하기 위해 동적 팬텀을 사용하였다. 각 래피드아크 치료계획 당 EPID를 사용한 portal dosimetry delivery quality assurance (DQA) 계획과 이차원 다이오드 검출기배열장치인 MapCHECK2를 사용한 DQA 계획을 수립하여 호흡연동 방사선 치료과정에서 누적된 선량분포의 정확도를 분석하였다. 모든 환자의 호흡주기는 4초로 설정하였고, 수립한 DQA 계획들을 호흡연동 없이 연속적으로 조사하는 것과, 1초의 빔조사 구간과 2초의 빔조사 구간, 총 3가지의 경우에 대해 실제 방사선량 측정과 감마평가를 통해 선량의 정확도를 분석하였다. Portal dosimetry DQA 경우 평균 감마평가의 합격률은 호흡연동 없이 연속적일 때 $98.72{\pm}0.82%$ 였고, 1초의 빔조사 구간의 경우 $94.91{\pm}1.64%$, 2초의 빔조사 구간의 경우 $98.23{\pm}0.97%$이었다. MapCHECK2 DQA경우 평균 감마평가의 합격률은 호흡연동 없이 연속적일 때 $97.80{\pm}0.91%$였고, 1초의 빔조사 구간의 경우 $95.38{\pm}1.31%$, 2초의 빔조사 구간의 경우 $97.50{\pm}0.96%$였다. 본 연구 결과를 통해 빔조사 구간의 길이가 증가하여 갠트리 정지 동작 수가 감소할수록 호흡연동 래피드아크의 선량 정확도가 증가함을 확인할 수 있었으며, 이러한 특성을 호흡연동 방사선치료 대상 환자의 선정 및 호흡방식에 대한 교육과정에 고려되어야 할 것으로 판단되었다.