• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.102-121
• /
• 2012

The purpose of this study is to verify homoteneity of soil and earthenwares and identify firing temperature of earthenwares excavated from Yeoncheon Hapsuri: two earthenwares of the New Stone Age(YCP-1, YCP-2); two of the Bronze Age(YCP-3, YCP-4); and four of the Three States Age(YCP-4~8). The comparative analysis of soil (YCRM) and the earthenwares displays that soil geochemical patterns were similar to YCP-1, YCP-3, YCP-5, YCP-6, YCP-7 and YCP-8. On the other hand, YCP-2 and YCP-4 did not show the similarity to the one of soil because they had been enriched with MgO by contained talc and chlorite. Based on the absorption rate, specific gravity, structural characteristics and XRD analysis, firing temperature has been estimated: for YCP-7 and YCP-8 was $870^{\circ}C$ or over; for YCP-2 and YCP-4 $800^{\circ}C$ or below; and for YCP-1, YCP-3, YCP-5 and YCP-6 between 800 and $870^{\circ}C$. Mineralogical analysis displays that the geochemical pattern of the soil is coincide with the one around Yeoncheon Hapsuri site, which also shows similarity to the one of earthenwares. Such result persuades that the excavated earthenwares were produced with the soils within the precinct of the archaeological sites.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.192-207
• /
• 2018

The Hyangwonjeong and Chwihyanggyo located in the back garden of Gyeongbokgung Palace have mainly been investigated by referring to historical records about the reign of King Gojong and various drawings thought to have been made in the late Joseon period. Because the current Chwihyanggyo was rebuilt temporarily after being burned to the ground during the Korean War, its form and the location of its reconstruction are not grounded on any accurate historical investigation. Although there are some photos of the Chwihyanggyo that were taken between the end of the Joseon period and the Japanese colonial era, there is no information about the photographer or when they were taken, and it is hard to see which photos show the original Chwihyanggyo Bridge with them. The Cultural Heritage Administration, which is currently promoting the restoration of the Chwihyanggyo, has recognized this problem and initiated research on the matter. In 2017, an excavation survey successfully identified the original location of the Chwihyanggyo, as well as that of Hyangwonji Gado (假島), and the shape of the first foundation stone in the pier. With these findings it was possible to infer the ways in which the Chwihyanggyo has changed over the years. Moreover, by measuring the AMS (Accelerator Mass Spectrometer) of the samples collected in the mounding layer of the Gado where the Hyangwonjeong is located, it was discovered that the Hyangwonjeong was constructed sometime after the Imjin waeran (Japanese Invasion of Korea in 1592), which means that the theory that 'the late Joseon Hyangwonjeong was not the former early Josenn Chwirojeong' is groundless. Judging by the materials found to date, we can reasonably assume that the Chwihyanggyo and Hyangwonjeong must have been built around the same time that Geoncheonggung Palace was founded in the late Joseon period.

• Journal of Elementary Mathematics Education in Korea
• /
• v.22 no.4
• /
• pp.385-403
• /
• 2018

Fraction division can be categorized as partitive division, measurement division, and the inverse of a Cartesian product. In the contexts of quotitive division and the inverse of a Cartesian product, the multiply-by-the-reciprocal algorithm is drawn well out. In this study, I analyze the potential and significance of the method of using $1{\div}$(divisor) as an alternative way of developing the multiply-by-the-reciprocal algorithm in the context of quotitive division. The method of using $1{\div}$(divisor) in quotitive division has the following advantages. First, by this method we can draw the multiply-by-the-reciprocal algorithm keeping connection with the context of quotitive division. Second, as in other contexts, this method focuses on the multiplicative relationship between the divisor and 1. Third, as in other contexts, this method investigates the multiplicative relationship between the divisor and 1 by two kinds of reasoning that use either ${\frac{1}{the\;denominator\;of\;the\;divisor}}$ or the numerator of the divisor as a stepping stone. These advantages indicates the potential of this method in understanding the multiply-by-the-reciprocal algorithm as the common structure of fraction division. This method is based on the dual meaning of a fraction as a quantity and the composition of times which the current elementary mathematics textbook does not focus on. It is necessary to pay attention to how to form this basis when developing teaching materials for fraction division.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.28-38
• /
• 2018

The purpose of this study is to clarify what is the unique garden making methods of Enshu Kobori by surveying and analyzing that existing garden of Enshu Kobori is different from the existing Japanese garden that had been built up to such a period. Enshu Kobori breaks away from the conventional frame that was established with the gardens of existing Karesansui style(枯山水樣式) with the materials of rocks and sands. Enshu Kobori is produced to make harmony with the rocks by trimming the Rhododendron indicum and this type of making method of Enshu was originated from the aesthetic principle of kireisabi. Due to this type of cause, the garden of Enshu Kobori displays splendid and yet a simple beauty of gardening. With respect to the establishment of a garden unique to Enshu Kobori as such, it seemed to have the cultural background expanded with the cultural perception and official family class of the edo period where it strived for new things. Therefore, Enshu Kobori was designed as the ornament-oriented garden rather than the garden that requires direct ceremonial act. The subject sites for this study are Raikyuji, Daichiji, Shodenji, Nanzenji Hojo and Konchiin as intended by Enshu Kobori. Contents of the study contemplate the location of garden, factors to introduce the garden, structure of garden, background of garden, use of stones, plants and scenic views to clarify the uniqueness of the Enshu Kobori garden.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.17-33
• /
• 2016

Samples from newly exposed outcrop of sedimentary layers forming Jeongdongjin coastal terrace in Gangreung area are collected and analyzed to find the sedimentary environment. The site are located at the gentle hillslope of the terrace surface area. The height of the outcrop is about 8m and the altitude of it's highest part is 68~73m MSL. The lowest part of this out crop is the partly consolidated sand layer with gravel veneer within it. It is found that this part is not in-situ weathered sand stone through the OSL method. This sand layer is overlain by the gravel layer with sand matrix. The shapes of the gravels from this part are mainly 'platy', 'elongated', and 'bladed' by the index of Sneed and Folk(1958). In addition, mean roundness is not so high. It is sceptical to regard this part as marine sediments which are continuously exposed to erosional processes. The boundary between the lowest sand layer and gravel layer showing the abrupt change in forming material without any mixture or transitional zone, so gravels are seemed to deposited after some degree of consolidation of the lowest sand layer. In addition, the hight of the boundary between layers are changed by the place, so the surface of the partly consolidated sand layer is not flat and has irregularity on topography when it buried by gravels. Main part of this out crop is the poorly sorted coarse gravel(22.4mm) with sand matrix($1.36{\phi}$) layer with at least 2m thick covering the relatively fine gravels discussed above. Over 20% of particles have 'very platy', 'very elongated' and 'very bladed' shape and only less than 5% of particles have 'compact' shape, So this particles are also very hard to be regard as marine gravels which are abraded by marine processes. It can be concluded that this gravel layer formed by fluvial processes rather than coastal processes base on the form of the clast and sedimentary structure. The gravel layer is covered by fine($3{\sim}4{\phi}$) material layers of psudo-gleization which showing inter-bedding of red and white layers. Chemical composition of matrix and other fine materials should be analyzed in further studies. It is attempted to fine the burial ages of the sediment using OSL method, but failed by the saturation. So it can be assumed that these sediments have be buried over 120ka.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.351-364
• /
• 2021

Purpose: Fire load analysis was conducted to secure basic data for evaluating fire risk of educational facilities. In order to calculate the fire load through a preliminary survey, basic data related to the fire load of school facilities were collected. Method: The basic data were the definition and types of fire loads, combustion heat data for the calculation of fire loads. The fire load was evaluated by multiplying the combustion heat by the weight of the combustibles in the compartment when calculating the fire load. Result: As for the fixed combustible materials of A-elementary school, the floor was mainly made of wood, in consideration of emotion and safety in the classroom, music room, and school office, and the rest of the compartments were made of stone. The ceiling and walls were made of gypsum board and concrete, so they were not combustible. The typical inflammable items in each room were desks, chairs, and lockers in the classroom, and the laboratory equipment box and experimental tool box were the main components in the science room, and books, bookshelves, and reading equipment occupied a large proportion in the library room. Conclusion: 'The fire loads of A-elementary' schools according to the combustibles loaded were in the order of library, computer room, English learning room, teacher's office, general classroom, science hall, and music room.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.1
• /
• pp.61-73
• /
• 2020

The purpose of this study is to investigate the relationship between educational attainment, history, tourism, psychological benefits, educational benefits, and hedonic benefits on visitors 'intention, and to provide Suwon Hwaseong' We propose a suggestion point. The implications of this study are as follows. First, the participants of Suwon Hwaseong Fortress are not only aware of the fact that the meaning of Mars is simply a stone build-up, but also a place to learn Korean history, experience various cultural experiences and attractions, Should be developed and made available to tourists. Second, the officials of Suwon Hwaseong Fortress should develop educational materials to understand the history of Mars as the representative history of Korean history. Furthermore, contents that show the superiority of Suwon Hwaseong in comparison with various world cultures It is necessary to provide policy support so that it can be developed and provided. Third, the officials of Suwon Hwaseong Fortress will have to worry about the development of culture prototype that can be excavated as a tourism factor when visitors visit and how to provide contents. In order to make sure that tourists do not inconvenience during sightseeing, It should be enough. Finally, the officials of Suwon Hwaseong should provide various entertainment factors around Hwaseong, and should try to create a desire to visit Hwaseong through a systematic PR method.

• Conservation Science in Museum
• /
• v.28
• /
• pp.17-34
• /
• 2022

This study seeks to identify the material characteristics of earthenware excavated from the Bangi-dong Ancient Tomb No. 3 and the articulated stone-mound tomb of the Seokchon-dong ancient tombs in the Songpa region, and analyze the homogeneity and the firing temperature of the materials used at each excavated site. The remains have been studied relatively recently, and the groups of tombs in which they were found demonstrate the transition of ancient Korean burial systems, and at the same time, provide important archaeological data about those in power at the time. The earthenware pottery excavated from the two sites examined in the study were buried at different times, and it is assumed that they were made by procuring weathered soil of similar gneiss, judging from the behavior of the compatible and incompatible elements and the weathering tendency found by examining the main components. In addition, the examination of the mineral composition and microstructure of clay indicates that the earthenware from Seokchon-dong was fired at 950 degrees Celsius or lower at a relatively early stage. On the other hand, the earthenware from Bangi-dong Tomb No. 3 was confirmed to have experienced temperatures below 850 degrees Celsius and above 1,000 degrees Celsius. However, it is difficult to interpret the difference as the result of the changes in firing temperature throughout the eras. It is expected that it will be possible to interpret the changes in earthenware manufacturing techniques by comparing more diverse earthenware potteries and ancient soils.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.289-300
• /
• 2022

In the 6^th and 7^th centuries, 5 iron artifacts excavated form the Baekje Stone Tomb in Guryong-ri site, Ungcheon, Boryeong, were studied. The sample were metal microscopic observation, SEM-EDS analysis and Raman micro-spectroscopy analysis were conducted to understand the metallurgical characteristics. The microstructure observation showed the presence of ferrite and pearlite throughout, and differences in carbon content existed depending on the direction. Non-metallic inclusions were in the form of long lines, and most of them were wüstite, fayalite. It is indicated that the artifacts were forge welded using hypoeutectoid steel, with signs of carburizing and decarburizing processes. Some crystals with high P₂O₅, TiO₂, CaO content were identified as sarcopside, ulvöspinel, and perovskite, respectively, through Raman spectroscopy. A comparison of the results with previous studies on the sites of Bujang-ri site in Seosan and Bongseon-ri site in Seocheon, which are adjacent sites in the coastal area, revealed that, while heat treatment technology was available, the artifacts were not heat-treated considering the purpose for use for these artifacts. The chemical composition of the non-metallic inclusions P₂O₅, TiO₂, CaO were plotted in proportions to SiO₂ and compared with adjacent sites. Considering that the P₂O₅/SiO₂ ratio was widely distributed, the refining technology was not uniform. In addition, the TiO₂/SiO₂ ratio was found to be higher than that of other sites, meaning that a titanium-containing ore was used to manufacture the artifacts, unlike in surrounding sites, but it is not detected in all artifacts, so it may have been affected by various factors such as furnace walls in addition to raw materials. Although slag formers were used, considering the CaO/SiO₂ ratio and the (Al₂O₃/SiO₂)/(CaO/SiO₂) ratio, which appear to be similar to the surrounding sites, but it is possible that CaO containing raw ore was used because it is also affected by the components of raw ore. As a result of the study, it is highly likely that ore different from that of the surrounding sites was used for production, but a more comprehensive comparative study with the surrounding sites is needed in the future.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.45-59
• /
• 2006

The successful performance of any numerical geotechnical simulation depends on the accuracy and efficiency of the numerical implementation of constitutive model used to simulate the stress-strain (constitutive) response of the soil. The corner stone of the numerical implementation of constitutive models is the numerical integration of the incremental form of soil-plasticity constitutive equations over a discrete sequence of time steps. In this paper a well known two-surface soil plasticity model is implemented using a generalized implicit return mapping algorithm to arbitrary convex yield surfaces referred to as the Closest-Point-Projection method (CPPM). The two-surface model describes the nonlinear behavior of coarse-grained materials by incorporating a bounding surface concept together with isotropic and kinematic hardening as well as fabric formulation to account for the effect of fabric formation on the unloading response. In the course of investigating the performance of the CPPM integration method, it is proven that the algorithm is an accurate, robust, and efficient integration technique useful in finite element contexts. It is also shown that the algorithm produces a consistent tangent operator $\frac{d\sigma}{d\varepsilon}$ during the iterative process with quadratic convergence rate of the global iteration process.