• 한국지반공학회지:지반
• /
• 제21권2호
• /
• pp.31-42
• /
• 2005

• 건축역사연구
• /
• 제18권1호
• /
• pp.7-29
• /
• 2009

In understranding the essence of the Korea traditional Architecture, it is important to consider the jointing methods of architectural members, architectural technologies, etc. Especially the purpose of this study is understanding on the Jointing Method of Wooden Members in the period of Unified Silla Architecture. It's conclusion is summarized as follows. 1. A section of column has very close to do with the foundation stone. The structures of foundation stone and column are generally concluded by butt joint, arrow-head joint, housed joint by Grang-e method. Judu is structured by arrow-head joint And, in general, beam is structured by Sagaematchum Chumcha and sagaljudu of Don direction. At the head of Pyungju and the body of Goju, Changbang is structed by Jangbumachum with arrow-head joint or by jumukchang-machum. Also, it is surmised that Gyisoseum and Anssolim methods had been applied to columns from former ages. The example can be found at Bagjae Mireuksaji stone pagoda. Bagjae Mireuksaji stone pagoda taking wooden-pagoda form adopts Gyisoseum and Anssolim methods. We can also find such a sort of methods from other stone constructions like Budo, etc. 2. Injahwaban is structured by short Changbumachum with arrowed-head joint at upper members, and by Anjangmachum at the lower part. This sort of Gongpo style can be seen in the mural painting of tomb of Koguryo and in Buplyungsa, Buplyunsa, Bupkisa-located in Japan, which are influenced by Bakjae or Unified Silla. It is considered that at the end of the late United Silla, Injawhaban had been replaced with Chumcha and Soro on the Pyungbang under influence of Dapo style from China.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.525-532
• /
• 2004

Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, a necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. The stress concentration ratio was the range of 1.7 to 3.0 and the higher it was the more replacement rate was increased.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.97-102
• /
• 2000

This paper presents the design, construction and performance of ground treatment to support road embankment on refuse landfill. Long-term settlement of refuse landfill is analysised by Sower and Yen/scanlon. As a results of site test, predicting settlement excess the allowable settlement and ultimate bearing capacity is not satisfied. The effectiveness of DDR(Deep Dynamic Replacement) is monitered by field tests (SPT, PBT, PMT) before, during and after construction of the stone columns. The ultimate bearing capacity for reinforced landfill by stone columns obtained from the in-situ test results has been compared with the existing theories. In municipal wastes landfill, settlement after treatment using stone column is satisfied to allowable residual settlement. Therefore, long-term stability can be gain in these cases.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.819-835
• /
• 2009

In order to investigate the field application of selected stabilization methods(cover soil method, surface and total interval treatment of embankment method) on rice paddies contaminated by heavy metals, column test was carried out with heavy metal-contaminated soils collected from rice paddies around abandoned mine site. Columns were made by acrylic and filled with untreated soil, treated soil mixed with amendments(lime stone and steel refining slag) and uncontaminated cover soil according to the design report. Distilled water was discharged into the columns with the velocity of 1 pore volume/day. During test, pH, EC, and heavy metal concentration were measured in the regular term. The column test result showed that the selected stabilization methods were effective remediation method to stabilize heavy metals in paddy soils, but it was also expected that application of surface treatment methods was required the careful observation on pH variation due to the lowest increment.

• 한국지반환경공학회 논문집
• /
• 제8권3호
• /
• pp.19-25
• /
• 2007

쇄석말뚝은 느슨한 사질토지반이나 점토지반에 치환법에 의해 다져진 자갈이나 쇄석을 연약한 지반에 삽입하여 개량하는 공법이다. 쇄석말뚝 공법은 흙과 말뚝 접촉면에서 압밀거동이 다양한 인자에 의해 영향을 받게 되어 정량적인 해석에 많은 어려움이 있다. 본 연구에서는 재하시험을 통해 선단지지 군말뚝의 거동에 대한 다양한 인자의 영향을 조사하였다. 궁극적으로 연약지반의 개량 특성과 설계인자의 영향력을 PR값을 사용하여 평가하였다. 실험결과와 계산된 PR 값으로부터 쇄석말뚝의 침하거동이 근입비나 매트의 설치여부 보다는 말뚝의 직경이나 복합지반의 치환율에 의해 영향을 받고 있음을 알 수 있다.

• 한국지반공학회지:지반
• /
• 제9권3호
• /
• pp.35-48
• /
• 1993

본 논문은 견고한 지층위에 존재하는 불량한 연약점토와 느슨한 실트질 모래지반에 대한 기초 안정화의 보강방안으로서 석재기등 기초의 설계 시공법을 고찰하고, 광명하안현장에서 석재기둥을 설치 전, 후의 지반에 대한 현장시험을 각각 실시하여 이 공법의 개량효과를 규명한 것이다. 실험 연구 분석한 결과, 석재기등 기초 위에서의 허용지지력과 표준관입시험치는 원지반 보다 각각 3.33배 및 3.9배 증가되어 지지력이 크게 강화됨을 확인하였다. 석재기등과 기성콘크리트 말뚝 기초의 경제성을 비교 검토하여보면 석재기등이 약 35%의 공사비 절감 효과가 있는 것으로 나타난다.

• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.5-11
• /
• 2007

국내에서는 조립토를 이용한 연약지반 처리공법 중 모래다짐말뚝공법이 많이 활용되고 있으나, 모래자원의 고갈과 단가상승으로 인해 적용이 제한되고 있어 대체공법이 필요한 실정이다. 본 연구에서는 육상부 현장에 시험시공된 단일쇄석다짐말뚝에 대한 정재하시험을 수행하였다. 시험시 말뚝의 직경을 700mm로 고정하구 재하판의 면적을 변화시켰으며, 치환율 20, 30, 40%에 대하여 정재하시험을 실시하였다. 그 결과를 토대로 하여 단일쇄석다짐말뚝의 지지력 증가효과를 평가하였다. 치환율이 증가할수록 침하량이 작아지는 경향을 보였다. 또한, 치환율이 고려된 단일쇄석다짐말뚝의 항복지지력 공식을 제안하였다.

• 건축역사연구
• /
• 제30권3호
• /
• pp.21-31
• /
• 2021

This paper studied the Pingzuo(平坐) platform structure of the two story building covered with one roof during the early period of Tang dynasty, based on wall paintings, stone pagodas, brick buildings and wooden buildings might be influenced by the Tang style. Instead of Chazhuzao(叉柱造), the typical column linkage in the Song, Liao and Jin buildings, it put the boundary column just behind the wall of a bracket set. Otherwise, the column root might be seen from outside, because its bracket set was still using Touxinzao(偸心造) which did not have a lateral arm on it. And its flooring structure was also different from the Song style, it used cantilever beams instead of lateral beams supported by bracket sets.

• Geomechanics and Engineering
• /
• 제19권4호
• /
• pp.329-342
• /
• 2019

In this paper, the effect of a group of sand columns in the loose soil bed using triaxial tests was studied. To investigate the effect of geotextile reinforcement type on the bearing capacity of these sand columns, Vertical encased sand columns (VESCs) and horizontally reinforced sand columns (HRSCs) were used. Number of sixteen independent triaxial tests and finite element simulation were performed on specimens with a diameter of 100 mm and a height of 200 mm. Specimens were reinforced by either a single sand column or three sand columns with the same area replacement ratio (16%) to evaluate the Influence of the column arrangement. Effect the number of sand columns, the length of vertical encasement and the number of horizontal reinforcing layers were investigated, in terms of bearing capacity improvement and economy. The results indicated that the ultimate bearing capacity of the samples with three ordinary sand columns (OSCs) is eventually about 11% more than samples with an OSC. Also, comparison of the column reinforcing modes showed that four horizontal layers of geotextile achieved similar performance to a vertical encasement geotextile at the 50% of the column height, from the viewpoint of strength improvement, while from the viewpoint of economy, the geotextile needed for encasing the single column is around 2.5 times of the geotextile required for four layers.